대한치과의사협회지 (The Journal of the Korean dental association)

  • 제52권6호
  • /
  • Pages.346-353
  • /
  • 2014
  • /
  • 0376-4672(pISSN)
  • /
  • 2713-7961(eISSN)
대한치과의사협회 (The Korean Dental Association)
권호 표지

임상가를 위한 특집 2 - CAD/CAM 기술을 이용한 총의치 제작의 현재와 전망

Current status and future perspectives of CAD/CAM fabricated complete denture

  • 박찬진 (강릉원주대학교 치과대학 치과보철학교실 및 구강과학연구소)
  • Park, Chan-Jin (Department of Prosthodontics and Research Institute of Oral Science, College of Dentistry, Gangneung-Wonju National University)
  • 투고 : 2014.05.16
  • 심사 : 2014.05.23
  • 발행 : 2014.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Currently, computer-aided technology becomes one of main issues in clinical dentistry. About 25 years ago, the development of dental CAD/CAM systems for the fabrication of crowns and fixed partial dentures leads to be able to fabricate complete denture today. The fabrication of milled complete denture prostheses with digital scanning technology may decrease the number of patient appointments. However, the precise tooth arrangement and evaluation by patient is not promising relatively. The purpose of this review was to analyze the existing literature on computer aided technology for fabricating complete denture with historical background, current status, and future perspectives. In addition, two available commercial systems were introduced.

키워드

참고문헌

  1. Korean council on complete denture education. Prosthodontic treatment for edentulous patients. 2nd ed. Seoul; Yenang Inc.; 2014. p. 14-8.
  2. Miyazaki T, Hotta Y, Kuni J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J 2009;28(1):44-56. https://doi.org/10.4012/dmj.28.44
  3. Duret F, Preston JD. CAD/CAM imaging in dentistry. Curr Opin Dent 1991;1:150-4.
  4. Mormann WH, Brandestini M, Lutz F, Barbakow F. Chair side computer-aided direct ceramic inlays. Quintessence Int 1989;20:329-39.
  5. Andersson M, Oden A. A new all-ceramic crown: a dense-sintered, high purity alumina coping with porcelain. Acta Odontol Scand 1993;51:59-64. https://doi.org/10.3109/00016359309041149
  6. Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. Int J Prosthodont 1994;7:17-21.
  7. Korean council on complete denture education. Prosthodontic treatment for edentulous patients. 2nd ed. Seoul; Yenang Inc.; 2014. p. 504-10.
  8. Kawahata N, Ono Y, Nishi T, Hamano T, Nagaoka E. Trial of duplication procedure for complete dentures by CAD/CAM. J Oral Rehabil 1997;24:540-8. https://doi.org/10.1046/j.1365-2842.1997.00522.x
  9. Busch M, KordaBB. Concept and development of a computerized positioning of prosthetic teeth for complete dentures. Int J Comput Dent 2006;9(2):113-20.
  10. Sun Y, Lu P, Wang Y. Study on CAD & RP for removable complete denture. Comput Met Pro Biomed 2009;93:266-72. https://doi.org/10.1016/j.cmpb.2008.10.003
  11. Lee JH, Sohn DS, Kim TH. A novel method of complete denture fabrication with CAD/CAM. J Kor Dent Ass 2013;51(6):337-45.
  12. Infante L, Yilmaz B, McGlumphy E, Finger I. Fabrication complete dentures with CAD/CAM technology. J Prosthet Dent 2014;111(5):351-5. https://doi.org/10.1016/j.prosdent.2013.10.014
  13. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD/CAM fabricated complete dentures: Concepts and clinical methods of obtaining required morphological data. J Prosthet Dent 2012;107:34-46. https://doi.org/10.1016/S0022-3913(12)60015-8
  14. Bidra AS, Taylor TD, Agar JR. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future a perspecives. J Prosthet Dent 2013;109:361-6. https://doi.org/10.1016/S0022-3913(13)60318-2