초록
본 연구의 목적은 필름/증감지 방식에서 사용된 비감도 측정 방식을 이용하여 컴퓨터 방사선영상에서 영상판의 상대적 발광량을 평가하고자 하였다. 비감도 측정을 위한 특성곡선은 균일한 알루미늄으로 구성된 11 계단의 투과도계를 이용하였다. 디지털 방사선영상을 획득하기 위한 X선 조사조건은 50 kVp, 10 mAs로 조절했다. 영상후처리 알고리즘(MUSICA)의 모든 파라메터들은 제로화하여 원본 데이터에 근사화하였고 레이저 조사분류(exposure class)는 200으로 고정하였다. 영상판의 상대적 발광량 모델링은 X선 조사후 0, 4, 8, 12, 24 시간 보관한 영상판을 이용하였다. 그 결과, 컴퓨터 방사선영상시스템의 영상판 비감도 측정에 필요한 감도점 농도는 모든 특성곡선을 상대적으로 측정하기 용이한 2000 픽셀(pixel) 값이 적합하였다. 또한 영상판의 비감도가 저하될 때 영상신호를 생성하기 위한 빛 발광량도 감소하였다. 본 연구에서 제시한 비감도 평가방법은 컴퓨터 방사선영상시스템에서 영상판의 상대적 발광량을 평가할 수 있는 기술로 활용될 수 있을 것이다.
The aim of the present study was to evaluate a relative emission of image plate (IP) in computed radiography (CR) system by using relative sensitivity in film/screen methods. The characteristic curve was obtained by using the uniform aluminum 11-step wedge penetrometer. X-ray exposure factors on radiographic digital image were 50 kVp, 10 mAs. We adjusted zero of all parameter of algorithms (MUSICA) so proximate to raw data and applied to 200 of exposure class. Modeling on relative emission of IP are used IP without fading time and IP after 4 hours, 8 hours, 12 hours, 24 hours in the respective storage after X-ray exposure. The results of this study showed that the sensitivity point density at the measuring of relative sensitivity in CR was suited pixel values of the 2000 easy to relatively measure the characteristic curve and when relative sensitivity is decreased, the amount of light emitted from the image signal for generating was also decreased. In conclusion, the proposed method of measurement of relative sensitivity can be utilized to evaluate the quantity of relative emission of IP in CR system.