참고문헌
- S. Y. Lee, B. Kim, S. D. Kim, G. Kim and Y. S. Hong," Effect of Si Doping on the Wear Properties of CrN Coatings Synthesized by Unbalanced Magnetron Sputtering", Thin Soild Films, Vol. 506-507, pp.192-196, 2006. https://doi.org/10.1016/j.tsf.2005.08.027
- Y. S. Hong and S. Y. Lee, "A Comparative Study of Cr-X-N(X=Zr, Si) Coatings for the Improvement of the Low-speed Torque Efficiency of a Hydraulic Piston Pump", Metals and Materials Int. Vol. 14, No.1, pp.33-40, 2008. https://doi.org/10.3365/met.mat.2008.02.033
- H. Murrenhoff, U. Piepenstock and T. Kohmascher, "Analyzing Losses in Hydrostatic Drives", Proc. of the 7th JFPS International Symposium on Fluid Power, pp.103-108, 2008.
- E. Koc and C. J. Hooke, "Investigation into the Effects of Orifice Size, Offset and Overclamp Ratio on the Lubrication of Slipper Bearings", Tribology International, Vol. 29, No. 4, pp.299-305, 1996. https://doi.org/10.1016/0301-679X(95)00044-5
- R. E. Johnson and N. D. Manring, "Translating Circular Thrust Bearings", J. Fluid Mech., Vol. 530, pp.197-212, 2005. https://doi.org/10.1017/S0022112005003782
- A. Schenk and M. Ivantysynova, "An Investigation of the Impact of Elastohydrodynamic Deformation on Power Loss in the Slipper Swash Plate Interface", Proc. 8th JFPS Int. Symposium on Fluid Power, pp.228-234, 2011.
- I.S. Cho, "Theoretical Analysis of the Slipper Hydrostatic Bearings Shape in the Swash Plate Type Axial Piston Pump, J. Korean Soc. Fluid Power Constr. Equip., Vol.10, No.1. pp.14-20, 2013.
- O. Boinghoff, "Untersuchen zum Reibungsverhalten der Gleitschuhe in Schragscheiben-Axial-kolbenmascinen", VDI-Forschungsheft, VDI-Verlag, Dusseldorf, Vol. 584, 1977.
- S. Kobayashi, M. Hirose, J. Hatsue, and M. Ikeya, "Friction Characteristics of a Ball Joint in the Swash Plate Type Axial Piston Motor", Proc. 8th International Symposium on Fluid Power, pp.565-592, 1987.
- Y. Inaguma, "Reduction of Friction Torque in Vane Pumps by Using Physical Vapour Deposition-coated Vane", Proc. IMechE Vol.224 Part C: J. Mechanical Engineering Science, pp.2449-2458, 2010. https://doi.org/10.1243/09544062JMES2120
- M. Kano, "DLC Coating Technology Applied to Sliding Parts of Automotive Engine", New Diamond & Frontier Carbon Technology, Vol. 16, No.4, pp.201-210, 2006.
- Creating Nano Technologies Inc., www.creating-nanotech.com.
- Y. S. Hong, Y. C. Kwon, C. H. Kim, S. L. Lee, B. K. Kim, J. S. Moon and J. H. Kim, "Performance Improvement of the Hydrostatic Piston Shoe Bearing of an EHA-Piston Pump under Boundary Friction Conditions", J. Korean Soc. Fluid Power Constr. Equip., Vol.11, No.2. pp.30-35, 2014. https://doi.org/10.7839/ksfc.2014.11.2.030
피인용 문헌
- 크롬 도금한 유압 실린더 로드와 시일 사이의 미끄럼접촉 해석 vol.15, pp.1, 2014, https://doi.org/10.7839/ksfc.2018.15.1.010
- 소형 외접기어펌프를 사용하는 EHA의 시스템 효율 분석 vol.16, pp.2, 2014, https://doi.org/10.7839/ksfc.2019.16.2.015
- Review of cylinder block/valve plate interface in axial piston pumps: Theoretical models, experimental investigations, and optimal design vol.34, pp.1, 2014, https://doi.org/10.1016/j.cja.2020.09.030