References
- E. Katz, I. Willner, and A. B. Kotlyar, "A non-compartmentalized glucose | O2 biofuel cell by bioengineered electrode surfaces", J. Electroanal. Chem., Vol. 479, No. 1, pp. 64-68, 1999. https://doi.org/10.1016/S0022-0728(99)00425-8
- I. Willner, "Biomaterials for sensors, fuel cells, and circuitry", Science, Vol. 298, No. 5602, pp. 2407-2408, 2002. https://doi.org/10.1126/science.298.5602.2407
- N. Mano, F. Mao, and A. Heller, "Characteristics of a miniature compartment-less glucose-O2 biofuel cell and its operation in a living plant", J. Am. Chem. Soc., Vol. 125, No. 21, pp. 6588-6594, 2003. https://doi.org/10.1021/ja0346328
- S. Calabrese Barton, J. Gallaway, and P. Atanassov, "Enzymatic biofuel cells for implantable and microscale devices", Chem. Rev., Vol. 104, No. 10, pp. 4867-4886, 2004. https://doi.org/10.1021/cr020719k
- Y. Yan, W. Zheng, L. Su, and L. Mao, "Carbon-nanotubebased glucose/O2 biofuel cells", Adv. Mater., Vol. 18, No. 19, pp. 2639-2643, 2006. https://doi.org/10.1002/adma.200600028
- Y. Liu, Y. Du, and C. M. Li, "Direct electrochemistry based biosensors and biofuel cells enabled with nanostructured materials", Electroanalysis, Vol. 25, No. 4, pp. 815-831, 2013. https://doi.org/10.1002/elan.201200555
- F. Gao, L. Viry, M. Maugey, P. Poulin, and N. Mano, "Engineering hybrid nanotube wires for high-power biofuel cells", Nat. Commun., Vol. 1, p. 2, 2010.
- T. Miyake, S. Yoshino, T. Yamada, K. Hata, and M. Nishizawa, "Self-regulating enzymenanotube ensemble films and rheir application as flexible electrodes for biofuel cells", J. Am. Chem. Soc., Vol. 133, No. 13, pp. 5129-5134, 2011. https://doi.org/10.1021/ja111517e
- M. G. Bellino and G. J. A. A. Soler-Illia, "Nano-designed enzyme-functionalized hierarchical metal-oxide mesoporous thin films: En route to versatile biofuel cells", Small, Vol. 10, No. 14, pp. 2834-2839, 2014. https://doi.org/10.1002/smll.201302616
- S. C. Wang, F. Yang, M. Silva, A. Zarow, Y. Wang, and Z. Iqbal, "Membrane-less and mediator-free enzymatic biofuel cell using carbon nanotube/porous silicon electrodes", Electrochem. Commun., Vol. 11, No. 1, pp. 34-37, 2009. https://doi.org/10.1016/j.elecom.2008.10.019
- F. P. Cardoso, S. A. Neto, L. B. Crepaldi, S. Nikolaou, V. P. Barros, and A. R. D. Andrade, "Biocathodes for enzymatic biofuel cells using laccase and different redox mediators entrapped in polypyrrole matrix", J. Electrochem. Soc., Vol. 161, No. 4, pp. F445-F450, 2014. https://doi.org/10.1149/2.041404jes
- A. Zebda, L. Renaud, M. Cretin, C. Innocent, F. Pichot, R. Ferrigno, and S. Tingry, "Electrochemical performance of a glucose/oxygen microfluidic biofuel cell", J. Power Sources, Vol. 193, No. 2, pp. 602-606, 2009. https://doi.org/10.1016/j.jpowsour.2009.04.066
- H. Ryu, W. Choi, T. An, J. Heo, and G. Lim, "Fabrication and calibration of pH sensor using suspended CNT nanosheet", J. Sensor Sci. & Tech., Vol. 22, No. 3, pp. 207-211, 2013. https://doi.org/10.5369/JSST.2013.22.3.207
- I. Kim, T. An, and G. Lim, "Organophosphorus compounds detection using suspended SWNT films", J. Sensor Sci. & Tech., Vol. 22, No. 5, pp. 346-351, 2013. https://doi.org/10.5369/JSST.2013.22.5.346
- J. H. Lee, Y. W. Nam, H. C. Jung, D. H. Baek, S. H. Lee, and J. S. Hong, "Shear induced CNT/PDMS conducting thin film for electrode cardiogram (ECG) electrode", Bio-Chip J., Vol. 6, No. 1, pp. 91-98, 2012.
- R. Rastogi, R. Kaushal, S. K. Tripathi, A. L. Sharma, I. Kaur, and L. M. Bharadwaj, "Comparative study of carbon nanotube dispersion using surfactants", J. Colloid Interface Sci., Vol. 328, No. 2, pp. 421-428, 2008. https://doi.org/10.1016/j.jcis.2008.09.015
-
Y. Zhong and R. V. Bellamkonda, "Controlled release of anti-inflammatory agent
${\alpha}$ -MSH from neural implants", J. Control. Release, Vol. 106, No. 3, pp. 309-318, 2005. https://doi.org/10.1016/j.jconrel.2005.05.012