Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Rheology Properties for Development of Sprayed High Performance Fiber Reinforced Cementitious Composites for Protection and Blast Resistant

방호·방폭용 뿜칠형 고성능 섬유보강 시멘트 복합재료 개발을 위한 레올로지 특성 연구

  • 최연왕 (세명대학교 토목공학과) ;
  • 최병걸 (세명대학교 토목공학과) ;
  • 박만석 (세명대학교 토목공학과) ;
  • 성돈 (한국종합기술 국토설계부)
  • Received : 2014.08.04
  • Accepted : 2014.09.10
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This paper was evaluated the rheology properties according to each step of paste, mortar and HPFRCC as a part of the basic study to development of sprayed high performance fiber reinforced cementitious composites(HPFRCC) for protection and blast resistant. Rheology test results in step of paste, in case of GGBFs and FA, it showed that the plastic viscosity and yield stress reduced gradually according to the increase of mixing rate, and in case of SF, the plastic viscosity and yield stress increased radically starting from the mixing rate of 10%. Rheology test results in step of mortar, type of aggregates, it showed that particle shape and grading of aggregate is influence on plastic viscosity and yield stress, and change of volume ratio is influence on plastic viscosity than yield stress. Fluidity and rheology test results in step of HPFRCC, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer.

방호 방폭용 뿜칠형 고성능 섬유보강 시멘트 복합재료(HPFRCC) 개발을 위한 기초적인 연구의 일환으로 페이스트, 모르타르 및 HPFRCC 각 단계에서 구성재료의 레올로지 특성을 평가하였다. 페이스트 단계에서 레올로지 실험결과, GGBFs 및 FA의 경우 혼합률 증가에 따라 소섬정도 및 항복응력은 감소되는 것으로 나타났으며, SF의 경우 혼합률 10% 이후부터 소성점도 및 항복응력이 급격하게 증가되는 것으로 나타났다. 모르타르 단계에서 레올로지 실험결과, 잔골재의 종류 즉, 잔골재의 입형 및 입도는 소성점도 및 항복응력에 많은 영향을 미치는 것으로 나타났으며, Vs/Vm의 변화는 항복응력 보다 소성점도에 더 큰 영향을 미치는 것으로 나타났다. HPFRCC 단계에서 유동성 및 레올로지의 실험결과, 섬유 혼입 후 유동성 및 섬유분산성 개선에는 SP 보다 VA가 더 유효한 것으로 나타났다.

Keywords

References

  1. Kim, Y.W. (2013). Development of a Sprayable Ductile Fiber Reinforced Cememtitious Composite(ECC) Based on Micromechanics and Rheological Control, Journal of the Korea Concrete Institute, 15(4), 557-565. https://doi.org/10.4334/JKCI.2003.15.4.557
  2. Kim, Y.W., Kim, J.S., Ha, K.J., Cho, C.K., and Kim, J.K. (2007). Applications of ECC(Engineered Cementitious Composite) Based on Rheology Control of Cement Paste, Proceeding of Korea Concrete Institute, 19(1), 779-782.
  3. Kim, Y.Y., Kim, J.S., Kim, H.S., Ha, K.J., and Kim, J.K. (2005). Mechanical Properties of an ECC(Engineered Cementitious Composite) Designed Based on Micromechanical Principle, Journal of the Korea Concrete Institute, 17(5), 709-716. https://doi.org/10.4334/JKCI.2005.17.5.709
  4. Ko, K.T., Kang, S.T., Park, J.J., and Ryu, K.S. (2004). A Study on the Improvement of Workability of High Strength Steel Fiber Reinforced Cementitious Composites, Journal of the Korea Institute for Structural Maintenance and Inspection, 8(3), 141-148.
  5. Ko, K.T., Park, J.J., Kim, B.Y., Lee, J.S., Kim, S.Y., and Lee, J.H. (2002). A Study on the Improvement of Construction Performance of Steel Fiber Reinforced Cementitious Composites, proceeding of the Korea Concrete Institute, 14(2), 749-754.
  6. Kwon, S.H., Kim, Y.J., Lee, K.C., and Choi, Y.W. (2013). Measurements and Applications of Concrete Rheology, Special Articles, Proceeding of Korea Concrete Institute, 25(3), 24-33.
  7. Li, V. C., Wang, S., and Wu, C. (2001). Tensile Strain-hardening Behavior of PVA-ECC, ACI Materials Journal, 98(6), 483-492.
  8. Nam, J.S., Kim, H.S., Lee, I.C., Miyauchi, H., and Kim, K.H. (2013). Evaluation on the Impact Resistant Performance of Fiber Reinforced Concrete by High-Velocity Projectile and Contacted Explosion, Journal of the Korea Concrete Institute, 25(1), 107-114. https://doi.org/10.4334/JKCI.2013.25.1.107
  9. Park, D.H., No, M.H., and Park, C.K. (2004). Characterization of Rheology on the Multi-Ingredients Paste Systems Mixed with Mineral Admixtures, Journal of the Korea Concrete Institute, 16(2), 241-248. https://doi.org/10.4334/JKCI.2004.16.2.241
  10. Park, S.B., Kim, J.S., Kim, Y.W. (2008). Rheology Control of Cement Paste for Applying ECC Produced with Slag Particles to Self-Consolidating and Shotcreting Process, Journal of the Korea Concrete Institute, 20(1), 67-75. https://doi.org/10.4334/JKCI.2008.20.1.067
  11. Ranade, R., Li, V.C., Stults, M.D., Heard, W.F., and Rushing, T.S. (2013). Composite Properties of High-Strength, High- Ductility Concrete, ACI Materials Journal, 110(4), 413-422.
  12. Song, Y.J., and Yun, H.D. (2013). Tension-Stiffening and Cracking Behavior of 100 MPa Shrinkage-Compensated Ultra High-Strength Strain-Hardening Cement Composite (UHS-SHCC) Ties, Journal of the Korea Concrete Institute, 25(4), 371-379. https://doi.org/10.4334/JKCI.2013.25.4.371