동력기계공학회지 (Journal of Power System Engineering)

  • 제18권5호
  • /
  • Pages.94-99
  • /
  • 2014
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

트랙 이행거리에 따른 SKD61 재질의 레이저 메탈 디포지션 기초 특성 분석

Effect Analysis in Laser Metal Deposition of SKD61 by Track Pitch

  • 투고 : 2014.06.17
  • 심사 : 2014.09.19
  • 발행 : 2014.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, AISI M2 powder was selected primarily through various literature in order to improve the hardness and wear resistance. Among the laser metal deposition parameters, laser power was studied to improve the deposition efficiency in the laser metal deposition using a diode pumped disk laser. SKD61 hot work steel plate and AISI M2 powder were used as a substrate and powder for laser metal deposition, respectively. Fixed parameters are CTWD, focal position, travel speed, powder feed rate, etc. Experiments for the laser metal deposition were carried out by changing laser power. Through optical micrographs analysis of cross-section in LMD track, effect of the major parameters were predicted by track pitch. As the track pitch increased, so the reheated zone width, the overlap width and the minimum thickness was decreased. The hardness was decreased in the HAZ area, the hardness in the reheated HAZ area was decreased significantly and regularly in particular.

키워드

참고문헌

  1. H. S. Jee and J. H. Suh, 2003, "Laser-Aided Direct Metal Deposition(DMD) Technology", Journal of the Korean CAD/CAM Society, Vol. 8, No. 3. pp. 150-156
  2. Y. S. Chang, 2007, "Evaluation of the Productivity and Environmental Effects of Laser Aided Direct Metal Deposition Process for Remanufacturing", Clean Technology, Vol.13, No.3, pp.228-234.
  3. S. Q. Wang, K. M. Chen, X. H. Cui, Q. C. Jiang and B. Hong, 2006, "Effect of Alloying Elements on Thermal Wear of Cast Hot-Forging Die Steels", Journal of Iron & Steel Research, International, Vol.13, No.5, pp.53-59.
  4. W. Zhang, 2012, "Research on Microstructure and Property of Fe-VC Composite Material Made by Laser Cladding", Physics Procedia, International Conference on Solid State Devices and Materials Science, Vol.25, pp.200-204.
  5. C. Navas, A. Conde, B. J. Fernandez, F. Zubiri and J. de Damborenea, 2005, "Laser Coatings to Improve Wear Resistance of Mould Steel", Surface & Coating Technology, Vol.194, No.1, pp.136-142 https://doi.org/10.1016/j.surfcoat.2004.05.002
  6. S. H. Yeh, L. H. Chiu, W. C. Lo and C. L. Huang, 2011, "Influence of Vacuum Heat Treatment and Salt-Bath Nitro- carburization on the Corrosion Behavior of JIS SKD61 and DH31S Hot Work Steels", Advanced Materials Research, Vol.154-155, pp.1165-1169
  7. H. K. Lee, 2007, "Analysis and Optimization of the Cladding Parameters for Improving Deposition Efficiency in Cladding using a Low Power Pulsed Nd:YAG Laser", Journal of the Korean Welding and Joining Society, Vol.25, No.4, pp.49-57. https://doi.org/10.5781/KWJS.2007.25.4.049