DOI QR코드

DOI QR Code

액체급냉법에 의해 제조한 비정질 Co-Nb-B 합금의 전기화학적 부식 특성

Electrochemical Corrosion Properties of Amorphous Co-Nb-B Alloys Prepared by Melt-Spinning Method

  • Kim, Eun-Sun (Department of Physics Education, Chosun University) ;
  • Kim, Hyun-Goo (Department of Physics Education, Chosun University) ;
  • Jang, HeeJin (Department of Metallurgical and Materials Engineering, Chosun University)
  • 투고 : 2014.07.21
  • 심사 : 2014.08.28
  • 발행 : 2014.08.31

초록

This study was undertaken to examine the electrochemical corrosion properties of an $Co_{80}Nb_{10}B_{10}$ and $Co_{82}Nb_8B_{10}$ amorphous alloys prepared by melt-spinning method under various conditions. The potentiodynamic polarization responses at various levels of pH (pH 2, pH 7, pH 12) showed that the corrosion current rate of $Co_{80}Nb_{10}B_{10}$ alloy is lower than that of $Co_{82}Nb_8B_{10}$ alloy in all levels of pH, implying the general corrosion resistance of the alloy with higher Nb content is better than that with higher Co content. The pitting potential of $Co_{80}Nb_{10}B_{10}$ alloy was also better than that of $Co_{82}Nb_8B_{10}$, evidenced by the higher pitting potential. Nb is thought to be effective in increasing the protectiveness of the passive film and hence to improve the corrosion resistance of Co-Nb-B alloys.

키워드

참고문헌

  1. Japan Nanonet Bulletin 18, No. 14 (2004).
  2. http://www.sti.nasa.gov/tto/Spinoff2004/ch_7.html.
  3. M. Naka, K. Hashimoto and T. Masumoto J. Non-Cryst. Solids 355, 31 (1979).
  4. Y. Niu, F. Gesmundo, F. Viani and F. Rizzo, Corros. Sci. 36, 1973 (1994). https://doi.org/10.1016/0010-938X(94)90003-5
  5. N. A. Mariano, C. A. C. Souza, J.E. Maya and S.E. Kuri, Mater. Sci. Eng. A354, 1 (2003).
  6. H. Zohdi, H.R. Shahverdi, S.M.M. Hadavi, Electrochem. Commun. 13, 840 (2011). https://doi.org/10.1016/j.elecom.2011.05.017
  7. M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, NACE (1974).

피인용 문헌

  1. Enhancement of the Corrosion Resistance of CrN Film Deposited by Inductively Coupled Plasma Magnetron Sputtering vol.20, pp.3, 2014, https://doi.org/10.14773/cst.2021.20.3.112