DOI QR코드

DOI QR Code

Investigation of shinning Spot Defect on Hot-Dip Galvanized Steel Sheets

  • Liu, Yonggang (Auto Sheet Strategic Business Unit, Maanshan Iron & Steel Co. Ltd.) ;
  • Cui, Lei (Auto Sheet Strategic Business Unit, Maanshan Iron & Steel Co. Ltd.)
  • Received : 2014.04.22
  • Accepted : 2014.08.28
  • Published : 2014.08.31

Abstract

Shinning spot defects on galvanized steel sheets were studied by optical microscope, scanning electron microscope(SEM), Energy Dispersive Spectrometer (EDS) and Laser-Induced Breakdown Spectroscopy Original Position Statistic Distribution Analysis (LIBSOPA) in this study. The research shows that the coating thickness of shinning spot defects which caused by the substrate defect is much lower than normal area, and when skin passed, the shinning spot defect area can not touch with skin pass roll which result in the surface of shinning spot is flat while normal area is rough. The different coating morphologies have different effects on the reflection of light, which cause the shinning spot defects more brighter than normal area.

Keywords

References

  1. N. Y. Tang and F. E. Goodwin, A study of defects in galvanized coatings, Galvatech 2001, p. 44, Brussels, Belgium (2001).
  2. Jin xinyan, Liu xin, and Qian hongwei, Study of a spot defect caused by flaking of hot-dip galvannealed coating. Baosteel technology, 59, 3 (2008).
  3. Cheng guoping, Yuan mingsheng, and Ji sikai, Cause analysis of shinning dots on surface of galvannealed steel sheets after press forming, Baosteel technology, 6, 35 (2003).
  4. Francis Chen and Ram Patil, An In-depth analysis of various subtle coating defects, Galvatech 2004, p. 1055, Chicago, American (2004).
  5. Dong-Soo Han and Moon-Hi Hong, Characterization of the tiniest defects for automotive exposed panels, Galvatech 2007, p. 285, Osaka, Japan (2007).
  6. N. Y. Tang and F. N. Coady, Coating defects, origin and remedies, Galvanizers association 2001, 93rd Galvanizers association meeting, Portland, 2001.