Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

The Fabrication of Artificial Fine Aggregates Using Stone Sludge and Spent Bleaching Clay

  • Kim, Kangduk (Department of Advanced Materials Engineering, Kyonggi University)
  • Received : 2014.07.04
  • Accepted : 2014.08.27
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Artificial fine aggregates (denoted AFA) were fabricated using spent bleaching clay (denoted SBC) generated from processed vegetable oil and stone sludge (denoted SS) produced from crushed aggregate manufacturing materials for use as functional construction materials. Each raw material was crushed to particle size finer than $150{\mu}m$, and fine spherical pellets of approximately 1 ~ 4 mm in diameter were prepared by a pelletizing process. The physical properties of the AFA were measured with different types of sintering equipment. A new type of vertical furnace that sinters fine aggregates in a fluidized bed at high temperatures was designed and tested. AFA sintered in a rotary kiln at $1125^{\circ}C$ showed a bulk density of $1.5g/cm^3$ and a water absorption of 16%. AFA sintered in the vertical furnace at $1125^{\circ}C$ showed a bulk density of $1.9g/cm^3$ and water absorption of 8.5%. The bulk density of the AFA sintered in the vertical furnace showed a bulk density 27% higher and water absorption 47% lower than those of AFA sintered in the rotary kiln.

Keywords

References

  1. J. M. J. M. Bijen, "Manufacturing Processes of Artificial Lightweight Aggregates from Fly Ash," Int. J. Cem. Compos. Lightweight Concr., 8 [3], 191-99 (1986). https://doi.org/10.1016/0262-5075(86)90040-0
  2. R. Khanbilvardi and S. Afshari, "Sludge Ash as Fine Aggregates for Concrete Mix," J. Environ. Eng., 121 [9], 633-38 (1995). https://doi.org/10.1061/(ASCE)0733-9372(1995)121:9(633)
  3. J. H. Tay, K. Y. Show, and S. Y. Hong, "Concrete Aggregates Made from Sludge-marine Clay Mixes," J. Mater. Civ. Eng., 14 [5], 392-98 (2002). https://doi.org/10.1061/(ASCE)0899-1561(2002)14:5(392)
  4. W. K. Yip and J. H. Tay, "Aggregates Made from Incinerated Sludge Residue," J. Mater. Civ. Eng., 2 [2], 84-93 (1990). https://doi.org/10.1061/(ASCE)0899-1561(1990)2:2(84)
  5. H. R. Blank, "Red Mud from Alumina Plants as a Possible Source of Synthetic Aggregates" J. Test. Eval., 4 [5], 355-58 (1976). https://doi.org/10.1520/JTE10523J
  6. V. Adell, C. R. Cheeseman, A. Doel, A. Beattie, and A. R. Boccaccini, "Comparison of Rapid and Slow Sintered Pulverised Fuel Ash," Fuel, 87, 187-95 (2008). https://doi.org/10.1016/j.fuel.2007.04.009
  7. J. M. Khatib, "Properties of Concrete Incorporating Fine Recycled Aggregate," Cem. Concr. Res., 357, 63-69 (2005).
  8. J. P. Goncalves, L. M. Tavares, R. D. Toledo Filho, E. M. R. Fairbairn, and E. R. Cunha, "Comparison of Natural and Manufactured Fine Aggregates in Cement Mortars," Cem. Concr. Res., 37, 924-32 (2007). https://doi.org/10.1016/j.cemconres.2007.03.009
  9. S. Kimura, K. Kimura, H. Kamiya, and M. Horio, "A Novel Fluidized Bed Process to Produce Fine-grade Artificial Lightweight Aggregate," Powder Technol., 146, 111-20 (2004). https://doi.org/10.1016/j.powtec.2004.08.002
  10. A. A. Boateng, Rotary Kiln; pp. 285-86, Butterworth-Heinemann, Oxford, 2008.
  11. W. T. Tsai, H. P. Chen, M. F. Heish, H. F. Sun, and S. F. Chien, "Regeneration of Spent Bleaching Earth by Pyrolysis in a Rotary Furnace," J. Anal. Appl. Pyrolysis, 63, 157-70 (2002). https://doi.org/10.1016/S0165-2370(01)00150-4
  12. J. I. Bhatty, A. Malisci, I. Iwasaki, and K. J. Reid, "Sludge Ash Pellets as Coarse Aggregates in Concrete," Cem. Concr. Aggregate, 14 [1], 55-61 (1992). https://doi.org/10.1520/CCA10575J
  13. J. H. Tay, S. Y. Hong, and K. Y. Show, "Reuse of Industrial Sludge as Pelletized Aggregate for Concrete," J. Environ. Eng., 126 [3], 279-87 (2000). https://doi.org/10.1061/(ASCE)0733-9372(2000)126:3(279)
  14. C. M. Riley, "Relation of Chemical Properties to the Bloating of Clay," J. Am. Ceram. Soc., 34 [4], 121-28 (1951). https://doi.org/10.1111/j.1151-2916.1951.tb11619.x
  15. W. E. Brownell, "Black Coring in Structural Clay Products," J. Am. Ceram. Soc., 40 [6], 179-87 (1957). https://doi.org/10.1111/j.1151-2916.1957.tb12600.x
  16. P. S. Nichoson and W. A. Ross, "Kinetics of Oxidation of Natural Organic Material in Clay," J. Am. Ceram. Soc., 53 [3], 154-58 (1970). https://doi.org/10.1111/j.1151-2916.1970.tb12058.x