Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

A study on design, experiment control of the waterproof robot arm

방수형 로봇팔의 설계, 실험 및 제어 연구

  • Ha, Jihoon (Department of Mechanical Engineering, Korea Marine and Ocean Univ.) ;
  • Joo, Youngdo (SMEC CO., Ltd.) ;
  • Kim, Donghee (Department of Mechanical Engineering, Korea Marine and Ocean Univ.) ;
  • Kim, Joon-Young (Division of Marine Equipment Engineering, Korea Marine and Ocean Univ.) ;
  • Choi, Hyeung-Sik (Division of Mechanical & Energy Systems Engineering, Korea Maritime and Ocean University)
  • Received : 2014.02.06
  • Accepted : 2014.06.18
  • Published : 2014.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is about the study on a newly developed small waterproofed 4-axis robot arm and the analysis of its kinematics and dynamics. The structure of robot arm is designed to have Pitch-Pitch-Pitch-Yaw joint motion for inspection using a camera on itself and the joint actuator driving capacity are selected and the joint actuators are designed and test for 10m waterproofness. The closed-form solution for the robot arm is derived through the forward and inverse kinematics analysis. Also, the dynamics model equation including the damping force due to the mechanical seal for waterproofness is derived using Newton-Euler method. Using derived dynamics equation, a sliding mode controller is designed to track the desired path of the developed robot arm, and its performance is verified through a simulation.

본 논문에서는 화재나 홍수로 인하여 침수된 건물 내부를 탐사할 수 있는 새로운 방수형 4축 로봇팔을 설계하고 로봇의 기구학 및 동역학 해석을 수행한다. 로봇팔은 카메라를 이용한 탐사를 위한 Pitch-Pitch-Pitch-Yaw 4축 구조로 설계하고, 이를 구동하기 위한 관절구동기의 용량을 선정한다. 또한 수심 10m의 방수가능한 관절구동기를 설계 하고 실제 구동시험을 통하여 방수성능을 검증한다. 설계한 로봇팔의 순기구학 및 역기구학 식의 해석을 통해 닫힌 해를 유도하며, 메커니컬실의 마찰력을 고려한 로봇팔의 운동방정식을 뉴턴-오일러 방법에 의해 유도한다. 유도한 동역학식을 이용하여 개발한 로봇이 목표궤적을 잘 추종할 수 있도록 슬라이딩모드 제어기를 설계하고, 시뮬레이션을 통해 그 성능을 확인한다.

Keywords

References

  1. R. R. Murphy, "Activities of the rescue robot at the world trade center from 11-21 September 2001, IEEE Robotics & Automation Magazine, vol. 11, no. 3, pp. 851-864, 2004.
  2. T. Frost, C. Norman, S. Pratt, and B. Yamauchi, "Derived performance metrics and measurements compared to field experience for the packbot," Proceedings of the 2002 PerMIS Workshop, pp. 201-208, 2002.
  3. J. R. White, T. Sunagawa, and T. akajima, "Hazardous-duty robots-expeiences and needs", Proceedings of the IEEE/RSI International Workshop on Inteligent Robots and Systems, pp. 262-267, 1989.
  4. F. Michaud, M. Arsenault. Y. Bergeron, R. Cadrin, F. Gagnon, M. Legault, M. Millette, and J. Bisson, "Co-design of AZIMUT, A multi-modal robotic platform," ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 801-810, 2003.
  5. S. Srinivasa, D. Ferguson, C. Helfrich, D. Berenson, A. Collet, R. Diankov, G. Gallagher, G. Hollinger, J. Kuffner, and J. Vande Weghe, "A home xploring robotic butler," Autonom. Robots, vol. 28, no. 1, pp. 5-20, 2009.
  6. N. Nilsson, "BA mobile automation: An application of artificial intelligence techniques," Proceedings of the International Joint Conference on Artificial Intelligence, pp. 509-520, 1969.
  7. A. P. Ambler, H. G. Barrow, C. M. Brown, R. M. Burstall, and R. J. Opplestone, "A versatile system for computer-controlled assembly," Artificial Intelligence, vol. 6, no. 2, pp. 129-156, 1975. https://doi.org/10.1016/0004-3702(75)90006-5
  8. T. Lozano-Perez, J. Jones, E. Mazer, P. O'Donnell, W. Grimson, P. Tournassoud, A. Lanusse, and B. Handey, "A robot system that recognizes, plans, and manipulates," Robotics and Automation, Proceedings IEEE International Conference, vol. 4, pp. 843-849, 1987.
  9. P. Ben-Tzvi, A. A. Goldenberg, and Jean W. Zu, "Design, simulations and optimization of a tracked mobile robot manipulator with locomotion and manipulation capabilities" Robotics and Automation, IEEE International Conference, pp. 2307-2312, 2008.
  10. T. K. Kim, H. S. Kim, J. B. Song, J. H. Baek, and J. K. Ryu, "Arm design of a surveillance robot for stable camera view", Proceedings of the Korean Society of Mechanical Engineers Fall Annual Meeting, pp. 1078-1080, 2010.(in Korean)
  11. S. S. Kim, J. B. Song, H. S. Kim, "Design of a manipulator for surveillance robot using CFRP" Proceedings of the Korean Society for Precision Engineering Spring Conference, pp. 227-228, 2012.
  12. D. Y. Na, D. M. Choi, H. H. Min, H. P. Moon, J. W. Jung, and Y. T. Kim, "Vision-based docking method for modular robots with 3 DOF docking arm" Proceedings of Korea Intelligent Information System Society Fall Conference, vol. 19. no. 2, pp. 86-87, 2009.
  13. Mark W. Spong and M. Vidyasagar, Robot Dynamics and Control, Canada; John Wiley & Sons Inc, 1989
  14. J. J. Slotine and W. Li, Applied Nonlinear Control, Prentice-Hall, 1991.

Cited by

  1. Design of High Performance Manipulator for Small EOD Robot System vol.36, pp.12, 2014, https://doi.org/10.7736/kspe.2019.36.12.1125