Smart Structures and Systems

  • 제14권3호
  • /
  • Pages.347-365
  • /
  • 2014
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Positioning and vibration suppression for multiple degrees of freedom flexible structure by genetic algorithm and input shaping

  • Lin, J. (Department of Mechanical Engineering, Chien Hsin University of Science and Technology) ;
  • Chiang, C.B. (Department of Mechanical Engineering, Chien Hsin University of Science and Technology)
  • 투고 : 2013.01.22
  • 심사 : 2013.08.01
  • 발행 : 2014.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The main objective of this paper is to develop an innovative methodology for the vibration suppression control of the multiple degrees-of-freedom (MDOF) flexible structure. The proposed structure represented in this research as a clamped-free-free-free truss type plate is rotated by motors. The controller has two loops for tracking and vibration suppression. In addition to stabilizing the actual system, the proposed feedback control is based on a genetic algorithm (GA) to seek the primary optimal control gain for tracking and stabilization purposes. Moreover, input shaping is introduced for the control scheme that limits motion-induced elastic vibration by shaping the reference command. Experimental results are presented, demonstrating that, in the control loop, roll and yaw angles track control and elastic mode stabilization. It was also demonstrated that combining the input shaper with the proportional-integral-derivative (PID) feedback method has been shown to yield improved performance in controlling the flexible structure system. The broad range of problems discussed in this research is valuable in civil, mechanical, and aerospace engineering for flexible structures with MDOM motion.

키워드

과제정보

연구 과제 주관 기관 : National Science Council

참고문헌

  1. Blackburn, D., Lawrence, J., Danielson, J., Singhose, W., Kamoi, T. and Taura, A. (2010), "Radial motion assisted command shapers for nonlinear tower crane rotational slewing", Control Eng. Pract., 18(5), 523-531. https://doi.org/10.1016/j.conengprac.2010.01.014
  2. Chiang, C.B. (2012), Vibration control for multi-degree-of-freedom flexible structural system, Master Thesis, Chien Hsin University of Science and Technology.
  3. Cutforth, C.F. and Pao, L.Y. (2003), "Control using equal length shaped commands to reduce vibration", IEEE T. Control Syst. T., 11(1), 62-72. https://doi.org/10.1109/TCST.2002.806460
  4. Cutforth, C.F. and Pao, L.Y. (2004), "Adaptive input shaping for maneuvering flexible structures", Automatica, 40(4), 685-693. https://doi.org/10.1016/j.automatica.2003.11.013
  5. Fujisaki, Y., Ikeda, M. and Miki, K. (2001), "Robust stabilization of large space structures via displacement feedback" IEEE T. Automat. Contr., 46(12), 1993-1996. https://doi.org/10.1109/9.975507
  6. Hong, S., Park, H.C. and Park, C.H. (2006), "Vibration control of beam using multiobjective state-feedback control", Smart Mater. Struct., 15(1), 157-163. https://doi.org/10.1088/0964-1726/15/1/044
  7. Hu, Q. (2008), "Input shaping and variable structure control for simultaneous precision positioning and vibration reduction of flexible spacecraft with saturation compensation", J. Sound Vib., 318(1), 18-35. https://doi.org/10.1016/j.jsv.2008.03.068
  8. Hyland, D.C., Junkins, J.L. and Longman, R.W. (1993), "Active control technology for large space structures", J. Guid. Control Dynam., 16(5), 801-821. https://doi.org/10.2514/3.21087
  9. Leissa, A.W. (1969) Vibration of plates, Scientific and Technical Information Division, National Aeronautics and Space Administration, Washington, D.C., USA.
  10. Li, S., Qiu, J., Ji, H., Zhu, K. and Li, J. (2011), "Piezoelectric vibration control for all-clamped panel using DOB-based optimal control", Mechatronics, 21(7), 1213-1221. https://doi.org/10.1016/j.mechatronics.2011.07.005
  11. Lin, J. and Lewis, F.L. (2003), "Two-time scale fuzzy logic controller of flexible link robot arm", Fuzzy Set. Syst., 139(1), 125-149. https://doi.org/10.1016/S0165-0114(02)00389-5
  12. Lin, J. (2005a), "An active vibration absorber of smart panel by using a decomposed parallel fuzzy control structure", IFAC Eng. Appl. Artificial Intell., 18(8) 985-998.
  13. Lin, J. (2005b), "A vibration absorber of smart structures using adaptive networks in hierarchical fuzzy control", J. Sound Vib., 287(4-5), 683-705. https://doi.org/10.1016/j.jsv.2004.11.030
  14. Lin, J. and Zheng, Y.B. (2012), "Vibration suppression control of smart piezoelectric rotating truss structure by parallel neuro-fuzzy control with genetic algorithm tuning J. Sound Vib., 331(16), 3677-3694. https://doi.org/10.1016/j.jsv.2012.04.001
  15. Matsuno, F., Hatayama, M., Senda, H., Ishibe, T. and Sakawa, Y. (1996), "Modeling and control of a flexible solar array paddle as a clamped-free-free-free rectangular plate", Automatica, 32(1), 49-58. https://doi.org/10.1016/0005-1098(95)00100-X
  16. Moheimani, S., Vautier, B. and Bhikkaji, B. (2006), "Experimental implementation of extended multivariable PPF control on an active structure", IEEE T. Control Syst. T., 14(3), 443-455. https://doi.org/10.1109/TCST.2006.872532
  17. Nagashio, T. and Kida, T. (2009), "Robust control of flexible mechanical system by utilizing symmetry and its application to large space structures", IEEE T. Control Syst. T., 17(3), 671-680. https://doi.org/10.1109/TCST.2008.2004428
  18. Park, J.Y. and Chang, P.H. (2001), "Learning input shaping technique for non-LTI systems", Trans. ASME J. Dynam. Syst., Measure. Control, 123(2), 288-293. https://doi.org/10.1115/1.1367334
  19. Qiu, Z.C., Zhang, X.M., Wu, H.X. and Zhang, H.H. (2007), "Optimal placement and active vibration control for piezoelectric smart flexible cantilever plate", J. Sound Vib., 301(3), 521-543. https://doi.org/10.1016/j.jsv.2006.10.018
  20. Rao, A.K., Matesan, K., Bhat, M.S. and Ganguli, R. (2008), "Experimental demonstration of H? control based active vibration suppression in composite fin-tip of aircraft using optimal placed piezoelectric patch actuators", J. Intel. Mat. Syst. Str., 19(6), 651-669.
  21. Rhim, S. and Book, W.J. (2001), "Noise effect on adaptive command shaping methods for flexible manipulator control", IEEE T. Control Syst. T., 9(1), 84-92. https://doi.org/10.1109/87.896749
  22. Singhose, W., Kim, D. and Kenison, M. (2008), "Input shaping control of double-pendulum bridge crane oscillation", Trans. ASME J. Dynam. Syst., Measure. Control, 130(3), 0345041-0345047.
  23. Sorensen, K.L., Singhose, W. and Dickerson, S. (2007), "A controller enabling precise positioning and sway reduction in bridge and gantry cranes", Control Eng. Pract., 15(7), 825-837. https://doi.org/10.1016/j.conengprac.2006.03.005
  24. Sorensen, K.L. and Singhose, W.E. (2008), "Command-induced vibration analysis using input shaping principles", Automatica, 44(9), 2392-2397. https://doi.org/10.1016/j.automatica.2008.01.029
  25. Tuttle, T.D. and Seering, W.P. (1996), "Vibration reduction in flexible space structures using input shaping on mace: mission results", Proceedings of the IFAC World Congress (June), 55-60.
  26. Vaughan, J., Yano, A. and Singhose, W. (2008), "Comparison of robust input shapers", J. Vib. Sound, 315(4), 797-815. https://doi.org/10.1016/j.jsv.2008.02.032
  27. Vaughan, J., Kim, D. and Singhose, W. (2010), "Control of tower cranes with double-pendulum payload dynamics", IEEE T. Control Syst. T., 18(6), 1345-1358.

피인용 문헌

  1. A mechatronic kit with a control methodology for a modualized cable-suspended robot vol.22, pp.20, 2016, https://doi.org/10.1177/1077546315573905