한국전자통신학회논문지 (The Journal of the Korea institute of electronic communication sciences)

한국전자통신학회 (Korea Institute of Electronic Communication Science)
권호 표지
DOI QR코드

DOI QR Code

CSLR을 갖는 인셋 급전 마이크로스트립 안테나에 관한 연구

A Study on Inset Fed Microstrip Antenna Loaded with Complementary Single Loop Resonator

  • 홍재표 (경일대학교 전자공학과) ;
  • 김병문 (경북도립대학교 IT특약계열)
  • 투고 : 2014.06.06
  • 심사 : 2014.08.11
  • 발행 : 2014.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 논문에서는 CSLR(Complementary Single Loop Resonator)을 이용한 인셋 급전 마이크로스트립 안테나의 특성에 대해 연구하였다. SLR(Single Loop Resonator) 단일 구조에서 시뮬레이션 셋업 과정을 통해 산란계수로부터 실효투자율을 계산하였으며, 실효투자율이 음의 값을 갖는 주파수에서 SLR 구조의 치수를 선택하였다. 그리고 인셋 급전된 마이크로스트립 안테나의 접지면에 SLR 구조의 쌍대 구조인 CSLR을 $3{\times}3$으로 배열하여 최적 안테나를 설계하였다. 설계한 안테나의 반사손실과 복사패턴을 구하였으며, 공진주파수 2.82 GHz에서 기존의 인셋 급전 안테나와 크기를 비교하면 면적 대비 약 56.8%가 감소하는 결과를 얻었다. 사용된 툴은 3차원 FEM 툴인 Ansoft사의 HFSS를 사용하였다.

In this paper, the characteristics of inset fed microstrip antenna loaded with CSLR(complementary single loop resonator) are studied. Effective permeability parameters of the SLR unit cell is retrieved from simulated scattering parameters, and structure parameters of the SLR unit cell are selected so that effective permeability is negative value at the operating frequency. The optimized inset fed microstrip antenna loaded with SLR for a $3{\times}3$ array in the ground plane of a conventional patch antenna is designed and simulation results of return loss and radiation pattern are shown. At resonant frequency 2.82 GHz, the overall dimension of the proposed antenna is reduced by approximately 56.8% compared to the conventional inset fed antenna. Simulation results are obtained by 3D FEM solver(Ansoft's HFSS).

키워드

참고문헌

  1. J. B. Pendry, A. J. Holden, D. J. Robbins, and W. J. Stewart, "Magnetism from conductors and enhanced nonlinear phenomena," IEEE Trans. Micr. Theory. Tech., vol. 47, no. 11, Nov. 1999, pp. 2075-2084. https://doi.org/10.1109/22.798002
  2. F. Falcone, T. Lopetegi, M. A. G. Laso, J. D. Baena, J. Bonache, M. Beruete, R. Marques, F. Martin, and M. Sorolla, "Babinet principle applied to the design of metasurfaces and metamaterials," Phys. Rev. Lett., vol. 93, no. 19, 2004, pp. 1974011-1974014.
  3. F. Falcone, T. Lopetegi, J. D. Baena, R. Marques, F. Martin, and M. Sorolla, "Effective negative-$\varepsilon$ stopband microstrip lines based on complementary split ring resonator," IEEE, Microw. Wireless Compon. Lett., vol. 14, no. 6, June 2004, pp. 280-282. https://doi.org/10.1109/LMWC.2004.828029
  4. S. Thankachan, S. Mohan, A. Anil, S, Alisa, and A. R. Nair, "Size reduction of bluetooth antenna : CSRR based patch concept," Int. J. of Information and Computation Technology, vol. 4, no. 8, 2014, pp. 805-810.
  5. H.-A. Jang, "Miniaturization of patch antenna using CSRRs loaded ground plane," Master's Thesis, Kyungpook National University, Daegu, Korea, 2011.
  6. M. A. Abdall, M. A. Fouad, A. Elregeily, and A. A. Mitkees, "Wideband negative permittivity metamaterial for size reduction of stopband filter in antenna applications," Progress in Electromagnetics Research C., vol. 23, 2012, pp. 55-66.
  7. E. Ekmekci and G. T. Sayan, "A novel dual-band metamaterial structure," Progress in Electromagnetics Research Symp. Proc., Aug. 2009, pp. 87-90.
  8. J.-H. Yoon, "Design of circular ring antenna with half-circular strip for WLAN/WiMAX applications," J. of The Korea Institute of Electronic Communication Sciences, vol. 9, no. 4, 2014, pp. 414-424. https://doi.org/10.13067/JKIECS.2014.9.4.417
  9. O.-W. Kim, "Design of dual-band microstrip antenna for wireless communication applications," J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 6, 2012, pp. 1275-1279.
  10. Y.-W. Park, "Characteristics of microstrip array antenna," J. of The Korea Institute of Electronic Communication Sciences, vol. 7, no. 6, 2012, pp. 1281-1286.
  11. M. D. Steemson, Metamaterial analysis and design. Final Project Report, University of New South Wales, 2012.
  12. B.-M. Kim, H.-W. Son, J.-P. Hong, and Y.-K. Cho, "A novel epsilon near zero tunneling circuit using double-ridge rectangular waveguide," J. of Electromagnetic Engineering and Science, vol. 14, no. 1, Mar. 2014, pp. 36-42. https://doi.org/10.5515/JKIEES.2014.14.1.36
  13. J.-P. Hong and B.-M. Kim, "Design of inset fed patch antenna loaded with complementary single loop resonator," In Proc. of KIECS 2014 Conf., vol. 8, no. 1, Busan, Korea, June 2014, pp. 127-130.