참고문헌
- Schlaich J., Schaefer K., Jennewein M., 1987, Toward a Consistent Design of Structural Concrete, PCI Journal, Vol.32, p.p.74-150.
- CSA Technical Committee A23.3, 1984, Design of Concrete Structures CAN3-A23.3-M84, Canadian Standards Association, Rexdale, Ontario.
- Comie Euro-International du Beton, 1993, CEB-FIP Model Code 1990, Thomas Telford Services, Ltd., London.
- AASHTO, 1994, AASHTO LRFD Bridge Specifications, American Association of State Highway and Transportation Officials, 1st ed., Washington, DC.
- 한국콘크리트학회, 2007, 콘크리트 구조설계기준.
- Ritter W., 1899, Die Bauweise Hennebique(The Hennebique System), Schweizerische Bauzeitung, Bd. XXXIII, No. 7.
- Morsch E., 1909, Concrete-steel construction, McGraw-Hill, New York.
- Liang Q.Q., Xie Y.M., Steven G.P.., 2000, Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure, ACI Structural Journal, Vol.97, p.p.322-30.
- Ali M.A., White R. N., 2001, Automatic generation of truss model for optimal design of reinforced concrete structures, ACI Structural Journal, Vol.98, p.p. 431-42.
- Ling Q.Q., 2005, Performance-based optimization of structures theory and applications, Spon Press.
- Liang Q.Q., Xie Y.M., Steven G.P., 2001, Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization, ACI Structural Journal, Vol.98, p.p.226-32.
- Liang Q.Q., Uy B., Steven G.P.., 2002, Performance-based optimization for strut-tie modeling of structural concrete, Journal of Structural Engineering, Vol.128, p.p.815-23. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:6(815)
- Bruggi M, 2009, Generation strut-and-tie patterns for reinforced concrete structures topology optimization, Computers and Structures, Vol.87. p.p.1483-95. https://doi.org/10.1016/j.compstruc.2009.06.003
- Kwak H-G, Noh S-H, 2006, Determination of strut and tie models using evolutionary structural optimization, Engineering Structural, Vol.28, p.p.1440-49. https://doi.org/10.1016/j.engstruct.2006.01.013
- 곽효경, 양규영, 신동규, 2011, 점진적 구조 최적화 기법을 이용한 철근 콘크리트 구조물의 전단 해석, 한국전산구조공학회 논문집, Vol.24, p.p.319-328.
- 이동규, 신수미, 2008, 철근콘크리트 구조물의 스트럿-타이 모델 설계를 위한 전산모사 최적위상 구현, 대한건축학회논문집, Vol.24, p.p.19-26.
- 한국콘크리트학회, 2007, 콘크리트 구조부재의 스트럿-타이 모델 설계 예제집, 기문당.
- 이상진, 2003, 저차유한요소를 이용한 다하중 경우를 가지는 평면구조물의 위상최적화, 한국전산구조공학회 논문집, Vol. 16, p.p. 59-68.
- ACI Committee 318-05, 2004, Building Code Requirements for structural Concrete(ACI 318-05) and Commentary (ACI 318R-05), American Concrete Institute, Michigan, USA, p.355.
- Victoria, M., M. Querin, O., Marti, P., 2011, Generation od strut-and-tie models by topology design using different material properties in tension and compression, Struct Multidisc Optim, Vol.44, p.p.247-258. https://doi.org/10.1007/s00158-011-0633-z
- Sigmund O., 2001, A 99 line topology optimization code written in matlab, Struct. Multidisc. Optim., Vol.21, p.p.120-127 https://doi.org/10.1007/s001580050176
- 이상진, 박경임, 2013, 구조물의 위상최적화를 위한 Matlab 코드, 대한건축학회논문집, Vol.29, p.p.11-18.