• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2011

A sensorineural hearing loss(SNHL) occurs when the cochlea in the inner has functional problem. The region in the cochlea with no(or very few) functioning inner hair cells or neurons called 'dead regions'. Amplification using hearing aid over a frequency range corresponding to a dead region may not a beneficial. In this paper, we compared speech recognition with different location of dead region and gain and searched effective gain for hearing aid with dead region. In order to experiment, eight people who has normal hearing ware tested, and we used white noise and babble noise(SNR=0 dB). we divided by three conditions, low, mid and high frequency dead region. In addition, the gains in dead region ware 14.5 dB, 11.5dB and 6 dB gain. There ware different results by location of dead region. The result of WRS and preference in mid-frequency dead region and high-frequency dead region ware higher than them in low-frequency dead region. When we compared as gains, the score of WRS with lower gain was higher than 14.5 dB gain, and the preference was lower as higher gain.

• Korean Journal of Materials Research
• /
• v.28 no.7
• /
• pp.391-397
• /
• 2018

This study deals with the microstructure and tensile properties of 700 MPa-grade high-strength and seismic reinforced steel bars. The high-strength reinforced steel bars (600 D13, 600 D16 and 700 D13 specimens) are fabricated by a TempCore process, while the seismic reinforced steel bar (600S D16 specimen) is fabricated by air cooling after hot rolling. For specimens fabricated by the TempCore process, the 600 D13 and 600 D16 specimens have a microstructure of tempered martensite in the surface region and ferrite-pearlite in the center region, while the 700 D13 specimen has a microstructure of tempered martensite in the surface region and bainite in the center region. Therefore, their hardness is the highest in the surface region and shows a tendency to decrease from the surface region to the center region because tempered martensite has a higher hardness than ferrite-pearlite or bainite. However, the hardness of the 600S D16 specimen, which is composed of fully ferrite-pearlite, increases from the surface region to the center region because the pearlite volume fraction increases from the surface region to the center region. On the other hand, the tensile test results indicate that only the 700 D13 specimen with a higher carbon content exhibits continuous yielding behavior due to the formation of bainite in the center region. The 600S D16 specimen has the highest tensile-to-yield ratio because the presence of ferrite-pearlite and precipitates caused by vanadium addition largely enhances work hardening.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1691-1697
• /
• 1997

This paper presents a new motion compensated error coding method suitable for region based image coding system. Compared with block based conding, the region based coding improves subjective quality as it estimates and compensates 2D (or 3D) translantional, rotational, and scaling motion for each regions. although the region based coding has this advantage, its merit is reduced as bock-DCT (2D-DCT) is used to encode motion-compensated error. To overcome this problem, a new region adaptive motion compensated error coding technique which improver subjective and objective quality in the region boundary is proposed in this paper. In the proposed method, regions with large error are estimated using contour of the regions and contrast between the regions. The regions estiated as those with large error are coded by arbitrarily shaped image segment coding method. The mask information of the coded regions is not transmitted because it is estimated as the same algorithm in the encoder and the decoder. The proposed region adaptive motion conpensated error coding method improves about 0.5dB when it is compared with conventional block based method.

• Parasites, Hosts and Diseases
• /
• v.26 no.2
• /
• pp.113-116
• /
• 1988

The pattern of sensory papillae, chaetotaxy, of the cercaria of Clenorchis sinensis was observed, The chaetotaxy was as follows; 5~6 Ci 1, 4~5 Ci 2, 5, ~6 Ci3 at 1st row, 4 Cii 1, 2 Cii2, 4 Cii3, 5~6 Cii4 at 2nd row, 3~4 Ciii 1, 2~3 Ciii 2 at 3rd row, and 2 Civl, 2~3civ2, 2~3 Civ 3, at 4th row, in cephalic region; 2 AiV, 1 AiD, 2 AiiV, 1 AiiD, 2 Aiiiv, 2 AiiiD, 1 AivV, 1 AivD, 1 PiiD, 1 PiiiD, in ventral(V) and dorsal(D) portions of body. Caudal region revealed 2-2-2-2 formula.

• Advances in Computational Design
• /
• v.1 no.3
• /
• pp.253-264
• /
• 2016

Based on the variation of strain along the cross section, any region in a structural member can be classified into two regions namely, Bernoulli's region (B-region) and Disturbed region (D-region). Since the variation of strain along the cross section for a B-region is linear, well-developed theories are available for their analysis and design. On the other hand, the design of D-region is carried out based on thumb rules and past experience due to the presence of nonlinear strain distribution. Strut-and-Tie method is a novel approach that can be used for the analysis and design of both B-region as well as D-region with equal importance. The strut efficiency factor (${\beta}_s$) is needed for the design and analysis of concrete members using Strut and Tie method. In this paper, equations for finding ${\beta}_s$ for bottle shaped struts in concrete deep beams (a D-region) with and without steel fibres are developed. The effects of transverse reinforcement on ${\beta}_s$ are also considered. Numerical studies using commercially available finite element software along with limited amount of experimental studies were used to find ${\beta}_s$.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1341-1344
• /
• 2016

Dendropanax morbifera is an endemic tree species of Korea, it is restricted to the southern parts of Korea. The internal transcribed spacer (ITS) region of nuclear ribosomal DNA (nrDNA) for Dendropanax morbifera grown at Bogil-do, Korea was determined. We investigated the sequence-based phylogenetic relationships of plants related and clarified its taxonomical position. The determined sequences consisted of 689 residues. ITS1 was 222 bp long while ITS2 was 233 bp long. The 5.8S rDNA was 160 bp long. The ITS region sequences of the Dendropanax species included in this study were obtained from GenBank. Oreopanax polycephalus was used as the outgroup. A pairwise alignment was calculated using the Clustal X program. A phylogenetic tree was constructed by the neighbor-joining method using the Tree view program. Sequence similarities among species including D. morbifera Bogil-do isolate showed the range 92.6 to 99.7% in sequence-based phylogenetic analysis using total 615 base pairs of ITS1, 5.8S rDNA and ITS2. D. morbifera Bogil-do isolate exhibited the highest degree of relatedness to D. chevalieri, sharing 99.7% ITS region similarity. D. morbifera Bogil-do isolate also showed to D. trifidus, sharing 99.4% ITS region similarity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.868-874
• /
• 2007

This paper proposes an efficient partial matching system and representation by using a region-based method for 2D image, and we applied to an extraction of the ROI(Region of Interest) according to its matching score. The matching templates consist of the global pattern and the local one. The global pattern can make it by using region-based relation between center region and its rest regions in an object. And, the local pattern can be obtained appling to the same method as global, except relation between objects. As the templates can be normalized, we use this templates for extraction of ROI with invariant to size and position. And, our system operates only one try to match, due to normalizing of region size. To use our system for searching and examining if it's the ROI by evaluating the matching function, at first, we are searching to find candidate regions with the global template. Then, we try to find the ROI among the candidates, and it works this time by using the local template. We experimented to the binary and the color image respectively, they showed that the proposed system can be used efficiently for representing of the template and the useful applications, such as partially retrievals of 2D image.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1887-1890
• /
• 2003

This paper presents a three-dimensional (3D) head pose estimation algorithm using the stereo image. Given a pair of stereo image, we automatically extract several important facial feature points using the disparity map, the gabor filter and the canny edge detector. To detect the facial feature region , we propose a region dividing method using the disparity map. On the indoor head & shoulder stereo image, a face region has a larger disparity than a background. So we separate a face region from a background by a divergence of disparity. To estimate 3D head pose, we propose a 2D-3D Error Compensated-SVD (EC-SVD) algorithm. We estimate the 3D coordinates of the facial features using the correspondence of a stereo image. We can estimate the head pose of an input image using Error Compensated-SVD (EC-SVD) method. Experimental results show that the proposed method is capable of estimating pose accurately.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.107-115
• /
• 2008

Accurate extraction of traversable region is a critical issue for autonomous navigation of unmanned ground vehicle(UGV). This paper introduces enhanced extraction of traversable region by combining scene clustering with 3D world modeling using CCD(Charge-Coupled Device)/IR(Infra Red) image. Scene clustering is developed with K-means algorithm based on CCD and IR image. 3D world modeling is developed by fusing CCD and IR stereo image. Enhanced extraction of traversable regions is obtained by combining feature of extraction with a clustering method and a geometric characteristic of terrain derived by 3D world modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2514-2519
• /
• 2012

The policy objective of leading industries for an economic region is to increase industrial competitiveness by regional cooperation and linkage and so the economic impact analysis of R&D by region is required. This research utilizes regional input-output tables of the Bank of Korea to analyze the economic impact of 'next-generation wireless communication devices' project in 'New IT' sector of Chungcheong economic region.