DOI QR코드

DOI QR Code

Extracting Priorities of Strategic Components of Product Liability Response System using AHP

AHP기법을 활용한 제조물책임 대응시스템 구축요인의 전략적 우선순위 도출에 관한 연구

  • JunHyeok, Seo (Department of Industrial & Management Engineering, Hanbat National University) ;
  • BokSoo, Ko (Department of Industrial & Management Engineering, Hanbat National University) ;
  • Bae, SungMin (Department of Industrial & Management Engineering, Hanbat National University)
  • 서준혁 (한밭대학교 산업경영공학과) ;
  • 고복수 (한밭대학교 산업경영공학과) ;
  • 배성민 (한밭대학교 산업경영공학과)
  • Received : 2014.05.21
  • Accepted : 2014.06.05
  • Published : 2014.06.30

Abstract

Purpose: To develop efficient PL response system, SMEs should decide which component of PL response system is important and implemented with priority under limited resources. To accomplish this goal, we propose strategic priority components of PL response system for SME manufacturer. Methods: We categorize the components of PL response system based on prior research results - System, Organization, Training, Technology, Cost, and Awareness. AHP (Analytic Hierarchy Process) is applied to extract important components of PL response system, which is used in assigning the priority of component. To analyze effects of each components, performance sensitivity analysis is applied. Results: The survey analysis results show Technology is the most important components. Organization and Cost component are follows. As the importance of Technology is changed, we can find Organization, Cost is second and third important components. Conclusion: Our research shows Technology which is related to make a safe product with systematic process, is a basic enabler of PL response system. Also, building a PL team and securing a budget for PL activity should be carry out with limited resources.

Keywords

References

  1. Ahn, Insuk. 2004. "Study on the Evaluation of Product Safety in Design Process."Master's thesis, Korea University of Technology and Education.
  2. Bernard, Ross. 1998. "Product liability experiences of Japanese manufacturers in the USA." International Journal of Fatigue 20(2):107-134. https://doi.org/10.1016/S0142-1123(97)00088-1
  3. Chang, Seogju. 2010. "A Study on Product Liability Management Activity of Product Defectiveness." Journal of the Korean institute of plant engineering 15(2):95-102.
  4. Choi, Byungrok. 2005. "Product Liability Precedent of Korea." The Law Research Institute Law Journal 22(6):173-212.
  5. Choi, Byungrok. 2006. "A Study on Product Liability of GMO." Journal of Korean Society of consumer studies 17(3):119-131.
  6. Choi, Byungrok. 2012. "Product Liability for the death of a child caused by Mini-cup Jelly." Law Research Institute, the University of Seoul 19(3):113-162. https://doi.org/10.15821/slr.2012.19.3.004
  7. Choi, Byungrok. 2012. "A Study on the Product Liability for a Medicine(a Cold Medicine CONTAC 600)." Kyungpook Natl. Univ. Law Journal 46(0):457-486.
  8. Choi, Sanghoe. 2008. "The Product Liability of Genetically Modified Organisms." Korean Law Association Law Review 31(0):165-186.
  9. Choi, Sungwoon, and Kim, Sungchul. 2000. "Classification of Product Liability Case." Journal of Korea Safety Management & Science 2(3):151-169.
  10. Choi, Sungwoon, and Lee, Rakgoo. 2000. "Product Liability Prevention by ISO9001:2000 Quality Management System." Journal of Korea Safety Management & Science 2(2):57-69.
  11. Cho, G. T., Cho, Y. G., and Kang H. S. 2003. "Analytic Hierarchy Process." DongHyeon Press.
  12. Chung, Minhak. 2003. "Study on Countermeasure for Product Liability Law in Pork Meat Distribution Industry." Master's thesis, Chonnam National University.
  13. Daniel E Becnel Jr. 1998. "An overview of complex product liability litigation in the USA." International Journal of Fatigue 20(2):93-98. https://doi.org/10.1016/S0142-1123(97)00086-8
  14. Hwang, Hyungyoung. 2013. "A study on the Discussion Issue on Amendment of Product Liability Law and the Product Liability Insurance." Journal of the Korean Association of Comparative Private Law 20(2): 331-366.
  15. Han, Nakhyun, and Huh, Jaechang. 2003. "A Study on the product Liability Law and the Effective Countermeasures of Product Liability Insurance." Journal of Industrial Economics and Business 16(6): 53-71.
  16. Hong, Hankuk. 2003. "A Study on the case of PL prevention strategies and prevention systems in the domestic S-company." Journal of the Korean Society for Quality Management 31(1):62-75.
  17. Hong, Seongwook, Kim, Inho, Shin, Junghoon, and Ahn, Yongsun. 2005. "A Study on the Countermeasure against the Products Liability Law in the Construction Industry." Journal of the Regional Association of Architectural Institute of Korea 7(2): 87-94.
  18. Hyun, Onesoon, Park, Rohgook, and Jung, SooIl. 2006. "An Empirical Study on the Correspondence Level to Product Liability." Journal of Korea Safety Management & Science 8(4):53-62.
  19. Jeun, Youngju. 2010. "A Study on the Product Liability Insurance." Journal of Korean Law Association 39(August):291-310.
  20. Jin, Moonseog, Hyun, Seungcheol, Min, Hyejin, Park, Kwangho, and Sun, Kyungho. 2009. "Study on the recogition of optometrists for product Liability Law." The Korean journal of vision science 11(4):315-322.
  21. Joo, Jongmi. 2010. "The Product Liability Law and How to Deal with It." Korean Journal of Sport Management 15(3):85-89.
  22. Kim, C. N. 2011. "A Study on the Effects of Safety Quality Activities on Management Performance." PhD diss., Soongsil University.
  23. Kim, H. G., and Bae, C. G. 2003. "An Optimal Reliability Design Model Considering Product Liability Cost." The research institute of industrial technology development 17(2):41-91.
  24. Kim, Hongbae. 2003. "Design Approach System for product liability prevention." Journal of Korean Society of Basic Design & Art 4(1):291-307.
  25. Kim, Jaebong. 1998. "Production Liability; the Corporation Response." Chinese Academy of Social Sciences. Institute of Economics 7(3):239-262.
  26. Kim, Jinho. 2004. "The Influence and Construction Strategies of Constructor under PL Law in Construction Industry." Journal of the Korea Institute of building construction 4(4):127-134. https://doi.org/10.5345/JKIC.2004.4.4.127
  27. Kim, Jintae, and Jeon, Youngrok. 2005. "A Survey on Cognition Level of Consumers and Producers for Product Liability." Korea Safety Management & Science 7(3):109-120.
  28. Kim, Sangchan. 2010. "A Study on Product Liability of Medical Device Defects." Journal of Korean Law Association 39(8):39-59.
  29. Kim, Jinkuk. 2003. "A study on the system construction to cope with the product liability based on the risk man agement system." Master's thesis, The Graduate School of Sungkyunkwan University.
  30. Kim, Jinkyu. 2002. "Product Liability Prevention Policies through Improvement of Product Safety and Reliability." IE interfaces 15(3):270-278.
  31. Kim, Soonyeong. 2012. "A Study on the Strategic priority for Defense Quality Management Factors by using Analytic Hierarchy Process." Journal of the society of Korea Industrial and Systems Engineering 35(3):217-224.
  32. Kim, Yeonhee, Seo, Janghoon, Kim, Wooyul, and Park, Myeongkyu. 2004. "A Study on Safety in Article of Food conform to the Product Liability Act Introduction: The Metropolitan Area."Journal of the Korea Safety Management and Science 6(4):61-81.
  33. Kim, Youngseok, Shong, Kilmok, and Kim, Sungu. 2008. "The Study on Facility Accident Case and PL Recognition of the Safety Manager in Electric Installation for Private Use." Journal of the Korean Institute of Illuminating and Electrical Installation Engineers 22(9):40-46. https://doi.org/10.5207/JIEIE.2008.22.9.040
  34. Kwon, Sangro, and Han, Doyul. 2013. "A Study on Issues and Improvement Plans concerning the Product Liability Act." Korean Law Association Law Review 51:173-194.
  35. Kwon, Youngguk. 2002. "A Study on the Product Liability for Product Safety." IE Interfaces 15(2):133-146.
  36. Ko, Bokgoo, and Seo, Junhyeok. 2013. "A Study on the Product Liability Insurance of Small and Medium Enterprise Actual Conditions and Utilization Plan." Journal of the Korea Management Engineers Society 18(1):27-39.
  37. Kong, H. S., and Kim, J. H. 2010. "The Introduction of Beef Traceability System and Product Liability." Korean Law Association Law Review 39(0):1-18.
  38. Lee, Sehee, Yang, Jeongsam, and Kim, Gwangsub. 2010. "Establishment of an Effective Product Liability Prevention Plan by Analyzing Product Liability Cases." Quality and Reliability Engineering International 27(August):581-593.
  39. Lee, G. S., and Kim, C. S. 2009. "Prevention and Defense Measures of Product Liability." Minyeongsa.
  40. Lee, Hwaki, and Cho, Mingyu. 2012. "A Study on Effective Response to Product Liability for Diamond Tool Industry." Journal of the Korea Safety management & Science 14(2):71-82. https://doi.org/10.12812/ksms.2012.14.2.071
  41. Lee, Jounghee, and Ro, Hyungbong. 2007. "A Simple Model for Evaluating Product Liability Activities." Journal of the Korean Society for Quality Management 35(4):101-110.
  42. Lee, Sangmi, and Choi, Sangcheol. 2005. "A Study on the Strategies for Product Liability in the Food Service Industry." Journal of Digital Contents Society 5(5):219-227.
  43. Lim, S. U. 2005. "Study on the System Construction to Cope with the Product Liability Based on the Risk Management System." Confrontation University Press 12:105-123.
  44. Park, Byungkwon, and Lim, Chaekwan. 2005. "A Study on the Relationships among Total Quality Management for Safety, Total Product liability and PL Performances." Journal of Business Research 20(4):151-174.
  45. Park, Dongjin. 2013. "An Overview of Amendment Draft of Product Liability Act." The Journal of Comparative Private Law 20(3):553-598.
  46. Park, Joosic, Sung, Hokyong, and Kang, Gyungsic. 2002. "A Study Countermeasures Method of Domestic Small and Medium Enterprise According to Product Liability Law." Journal of Korea Safety Management & Science 4(1):81-92.
  47. Park, Jiyoung, and Cho, Am. 2008. "A Safety Evaluation Method for a Product Design Planning Stage: Application of AHP and Fuzzy." Journal of the Ergonomics Society of Korea 27(2):15-24. https://doi.org/10.5143/JESK.2008.27.2.015
  48. Park, Rohgook, and Lee, Songho. 2010. "A Study on the Actual Condition of Counterplan for Product Liability in Small and Medium Enterprises." Journal of Korea Safety Management & Science 12(4):99-105.
  49. Park, Chaeheung, Hwang, hee, and Moon, Jaesung. 2003. "Building of PSMS in corporate of ISO 9000 certification." Journal of the Korean Society for Quality Management 31(3):19-36.
  50. Park, Hyunhee. 2004. "A Study on the Product Liability Insurance." Journal of Korea Research Society for Customs 5(1):111-136.
  51. Park, Rohgook, and Chang, Seongju. 2009, "A Study on Strategic Countermeasure against product liability." Journal of Korea Safety Management & Science 11(1):165-173.
  52. Park, Rohgook, and Lee, Sungho. 2008. "A Case Study on PL Management in Small and Medium-Sized Firms of Gangwon-Do Province." Journal of Korea Safety Management & Science 10(3):99-107.
  53. Ree, Sangbok. 1997. "Protection and Defence of Manufacturing Company for Production Liability Law." Journal of the Korean Society for Quality Management 25(4):140-153.
  54. REUTERS. 2014. "Toyota's $1.2 billion settlement may be model for U.S. probe into GM." http://www.reuters.com/article/2014/03/19/us-toyota-settlement-idUSBREA2I0VB20140319.
  55. Satty, T. L. 1980. The Analytic Hierarchy Process. McGraw-Hill.
  56. Sumiko, Takaoka. 2005. "The effects of product liability costs on R&D with asymmetric information." Japan and the world economy 17(1-2):59-81. https://doi.org/10.1016/j.japwor.2003.10.001
  57. Song, J. H. 2002. Product Liability Act and Corporate Strategies. Seongandang.
  58. Yeun, Keeyoung. 2006. "Development of the Sports Industry and Product Liability." The Journal of Sports & Entertainment Law 9(0):199-228.
  59. Yang, Deoksoon, and Rhee, Keechoon. 2002. "A Review of Product Liability Law in relation to the Safety Consciousness of Korean Consumers." Journal of Korean Society of consumer studies 13(1):1-24.
  60. Yoo, J. H., Kim, D. H., and Ko, J. W., 2003, "A Study on Product Liability Response System of Chemical Product by Using Failure Mode and Effect Analysis." Journal of Korean Institute of Gas 7(4):30-35.