한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제27권8호
  • /
  • Pages.535-540
  • /
  • 2014
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

다이캐스팅용 알루미늄의 성분 변화에 따른 LED 방열 특성 연구

A Study of Characteristics of the LED Heat Dissipation According to the Changes in Composition of Die-casting Aluminum

  • 여정규 (부경대학교 LED 융합공학전공) ;
  • 허인성 (부경대학교 LED 해양융합기술연구센터) ;
  • 유영문 (부경대학교 LED 해양융합기술연구센터) ;
  • 이세일 (부경대학교 LED 해양융합기술연구센터) ;
  • 최희락 (부경대학교 재료공학과)
  • Yeo, Jung-Kyu (Department of LED Fusion Engineering, Pukyong National University) ;
  • Her, In-Sung (LED-Marine Convergence Technology R&D Center, Pukyong National University) ;
  • Yu, Young-Moon (LED-Marine Convergence Technology R&D Center, Pukyong National University) ;
  • Lee, Se-Il (LED-Marine Convergence Technology R&D Center, Pukyong National University) ;
  • Choi, Hee-Lack (Department of Materials Science and Engineering, Pukyong National University)
  • 투고 : 2014.06.05
  • 심사 : 2014.07.01
  • 발행 : 2014.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Because of the development of LED technology, products due to high output and compact, the material with high thermal conductivity has been developed. Now that heat radiating part of the LED lamp is currently used for die casting of aluminum. The development of aluminum with excellent thermal conductivity is required. In this study, we measured the thermal properties and compared them while we produced the alloy by changing the component of die casting aluminum. From this study, the thermal conductivity and thermal resistance of the developed alloy were superior to die casting aluminum.

키워드

참고문헌

  1. S. I. Kim and Y. D. Kim, KIIEE, 27, 3 (2013).
  2. S. L. Chuang, A. Ishibashi, S. Kijima, N. Nakayama, M. Ukita, and S. Taniguchi, IEEE J. Quant. Electron., 33, 970 (1997). https://doi.org/10.1109/3.585485
  3. N. Narendran and Y. Gu, J. Disp. Technol., 1, 167 (2005). https://doi.org/10.1109/JDT.2005.852510
  4. K. T. Kim, Y. S. Lim, J. S. Shin, S. H. Ko, and J. M. Kim, J. Korean Foun. Soc., 33, 171 (2013). https://doi.org/10.7777/jkfs.2013.33.4.171
  5. J. S. Shin, K. T. Kim, S. H. Ko and D. J. An, and M. H. Kim, Korean Foun. Soc., 33, 22 (2013). https://doi.org/10.7777/jkfs.2013.33.1.022
  6. Integrated Circuits Thermal Measurement Method - Electrical Test Method (Single Semiconductor Device), EIA/JEDEC Standard No. 51-1.
  7. D. S. Gong, Thesis, p. 16, Ulsan University, Ulsan (2013).