Journal of the Korean GEO-environmental Society (한국지반환경공학회 논문집)

Korean Geo-Environmental Society (한국지반환경공학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical Properties of Very Rapid Hardening Polymer Mortar for Concrete Repair

보수용 초속경 폴리머 모르타르의 역학적 특성

  • Received : 2014.04.25
  • Accepted : 2014.06.10
  • Published : 2014.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, mechanical properties of Very-Rapid Hardening Polymer (VRHP) mortar were investigated. To do it, 75 VRHP mortar specimens were tested by the compressive test, bending test, bonding test, freezing and thawing test, length variation test, and water absorption test. From the test results, it was confirmed that the bond strength of VRHP was higher than that of normal concrete by 50 %, and the resistance of freezing and thawing of VRHP was more excellent than normal concrete. In addition, length variation ratio and water absorption ratio of VRHP were smaller than those of normal concrete by 20 %. Therefore, It should be mentioned that VRHP can be successfully used as the material for repairing the crack of concrete structure.

본 연구에서는 초속경 폴리머 모르타르의 역학적 특성이 평가되었다. 이를 위해 총 75개의 모르타르 시편에 대한 압축강도, 휨강도, 부착강도, 동결융해, 길이변화, 그리고 흡수율 시험이 실시되었다. 실험결과로부터 초속경 폴리머 모르타르의 부착강도는 일반 콘크리트보다 50 % 정도 우수하였으며, 동결융해에 대한 저항성은 보통콘크리트보다 뛰어났다. 또한 초속경 폴리머 모르타르의 길이변화와 흡수율은 20 % 정도 일반콘크리트보다 작았다. 그 결과 초속경 폴리머 모르타르는 콘크리트 구조물의 균열을 보수하는데 효과적으로 활용될 수 있을 것으로 평가되었다.

Keywords

References

  1. Kim, H. S. (2010), Mechanical characteristics of asphalt emergency repairing materials mixed with polymer resin, Master's thesis, Chungju National University, pp. 24-32 (in Korean).
  2. KS F 2424 (2010), Standard test method for length chance of mortar and concrete, Korean industrial standards (in Korean).
  3. KS F 2762 (2011), Measurement of bond strength of products for the protection and repair of concrete structures by pull-off, Korean industrial standards (in Korean).
  4. KS F 4042 (2012), Polymer modified cement mortar for maintenance in concrete structure, Korean industrial standards (in Korean).
  5. KS F 2456 (2013), Standard test method for resistance of concrete to rapid freezing and thawing, Korean industrial standards (in Korean).
  6. KS L 5105 (2012), Testing method for compressive strength of hydraulic cement mortars, Korean industrial standards (in Korean).
  7. Park, H. I. (2005), Evaluation for performance according to curing method of polymer-modified mortars, Master's thesis, Seoul National University of Technology, pp. 7-33 (in Korean).
  8. Song, H. S. (2005), A study on effects of admixtures in polymer cement mortar for concrete repair, Master's thesis, Dongguk University, pp. 23-36 (in Korean).
  9. Yang, Q., Zhu, B., Zhang, S. and Wu, X. (2000), Properties and applications of magnesia-phosphate cement mortar for rapid repair of concrete, Cement and Concrete Research, Vol. 30, No. 11, pp. 1807-1813. https://doi.org/10.1016/S0008-8846(00)00419-1
  10. Zhong, S. and Chen, Z. (2002), Properties of latex blends and its modified cement mortars, Cement and Concrete Research, Vol. 32, No. 10, pp. 1515-1524. https://doi.org/10.1016/S0008-8846(02)00813-X