Structural Engineering and Mechanics

  • 제51권3호
  • /
  • Pages.471-485
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The empirical corner stiffness for right-angle frames of rectangular and H-type cross-sections

  • Kwon, Young-Doo (School of Mechanical Engineering & IEDT, Kyungpook National University) ;
  • Kwon, Soon-Bum (School of Mechanical Engineering & IEDT, Kyungpook National University) ;
  • Gil, Hyuck-Moon (Department of Offshore Structure Design & Engineering, Hyundai Heavy Industry) ;
  • Cho, Hui-Jeong (Graduate School, Kyungpook National University)
  • 투고 : 2013.04.26
  • 심사 : 2014.05.18
  • 발행 : 2014.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

Until now, the finite corner stiffness of the right-angle frames used as horizontal girders in a bonnet, have not been considered during the design process to result in not a precise result. This paper presents a design equation set for right-angle frames used as horizontal girders in a bonnet assuming rigid corner stiffness. By comparing the center stresses of the right-angle frame according to the design equation set with the results of the finite element method, the master curves for the empirical corner stiffness can be determined as a function of slenderness ratio. A second design equation set for a right-angle frame assuming finite corner stiffness was derived and compared with the first equation set. The master curves for the corner stiffness and the second design equation set can be used to determine the design moments at the centers of the girder so that the bending stresses can be analyzed more precisely.

키워드

참고문헌

  1. DIN 19704 (1976), Hydraulic Steel Structures Criteria for Design and Calculation, Germany.
  2. EMRC (1994), NISA II - User's manual.
  3. Hydraulic Gate and Penstock Association (1986), Technical Standards for Gates and Penstock.
  4. Kwon, Y.D., Jin, S.B. and Kim, J.Y. (2004), "Local zooming genetic algorithm and its application to radial gate support problems", Struct. Eng. Mech., 17(5), 611-626. https://doi.org/10.12989/sem.2004.17.5.611
  5. Kwon, Y.D. "Analysis of the right-angle frame with round corner considering a finite corner stiffness". (in preparation)
  6. Kwon, Y.D., Kwon, S.B., Goo, N.S. and Jin, S.B. (2000), "Optimal location of support point for weight minimization in radial gate of dam structure", Trans. KSME (A), 2(1), 492-497.
  7. Lewin, J. (2001), Hydraulic Gates and Valves, Inst. of Civil Engineers Publication, London.
  8. Orbanich, C.J. and Ortega, N.F. (2013), "Analysis of elastic foundation plates with internal and perimetric stiffening beams on elastic foundations by using finite differences method", Struct. Eng. Mech., 45(2), 169-182. https://doi.org/10.12989/sem.2013.45.2.169
  9. Reismann, H. and Pawlik, P.S. (1980), Elasticity-Theory and Applications, John Wiely & Sons, Inc., New York.
  10. Shariatmadar, H. (2011), "Dam-reservoir-foundation interaction effects on the modal characteristic of concrete gravity dams", Struct. Eng. Mech., 38(1), 65-79. https://doi.org/10.12989/sem.2011.38.1.065
  11. Timoshenko, S. and Goodier, J. (1970), Theory of Elasticity, 3rd Edition, McGraw Hill, New York.
  12. Ugural, A. and Fenster, S.K. (2003), Advanced Strength and Applied Elasticity, 4th Edition, Prentice Hall, London.

피인용 문헌

  1. New realistic hypothesis on corner stiffness of right-angle frames for increased analysis accuracy vol.231, pp.9, 2017, https://doi.org/10.1177/0954406215622499