Structural Engineering and Mechanics

  • 제51권3호
  • /
  • Pages.447-470
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic response and damage development analyses of an RC structural wall building using macro-element

  • Hemsas, Miloud (LSTE, Department of Sciences and Techniques (Civil Engineering), University of Mascara) ;
  • Elachachi, Sidi-Mohammed (I2M-GCE, CNRS, UMR5295, Department of Civil and Environmental Engineering, University of Bordeaux 1) ;
  • Breysse, Denys (I2M-GCE, CNRS, UMR5295, Department of Civil and Environmental Engineering, University of Bordeaux 1)
  • 투고 : 2013.01.26
  • 심사 : 2014.05.09
  • 발행 : 2014.08.10
⟨ 이전 논문 다음 논문 ⟩

초록

Numerical simulation of the non-linear behavior of (RC) structural walls subjected to severe earthquake ground motions requires a reliable modeling approach that includes important material characteristics and behavioral response features. The objective of this paper is to optimize a simplified method for the assessment of the seismic response and damage development analyses of an RC structural wall building using macro-element model. The first stage of this study investigates effectiveness and ability of the macro-element model in predicting the flexural nonlinear response of the specimen based on previous experimental test results conducted in UCLA. The sensitivity of the predicted wall responses to changes in model parameters is also assessed. The macro-element model is next used to examine the dynamic behavior of the structural wall building-all the way from elastic behavior to global instability, by applying an approximate Incremental Dynamic Analysis (IDA), based on Uncoupled Modal Response History Analysis (UMRHA), setting up nonlinear single degree of freedom systems. Finally, the identification of the global stiffness decrease as a function of a damage variable is carried out by means of this simplified methodology. Responses are compared at various locations on the structural wall by conducting static and dynamic pushover analyses for accurate estimation of seismic performance of the structure using macro-element model. Results obtained with the numerical model for rectangular wall cross sections compare favorably with experimental responses for flexural capacity, stiffness, and deformability. Overall, the model is qualified for safety assessment and design of earthquake resistant structures with structural walls.

키워드

참고문헌

  1. Bakir, P.G. and Boduroglu, H.M. (2006), "Nonlinear analysis of beam-column joints using softened truss model", Mech. Res. Commun., 33(2), 134-147. https://doi.org/10.1016/j.mechrescom.2005.09.002
  2. Belarbi, H. and Hsu, T.C.C. (1994), "Constitutive laws of concrete in tension and reinforcing bars stiffened by Concrete", ACI Struct. J., 91(4), 465-474.
  3. Belmouden, Y. and Lestuzzi, P. (2007), "Analytical model for predicting nonlinear reversed cyclic behaviour of reinforced concrete structural walls", Eng. Struct. J., 29(7), 1263-1276. https://doi.org/10.1016/j.engstruct.2006.08.014
  4. Brown, P.C. and Lowes, L.N. (2007), "Fragility functions for modern reinforced-concrete beam-column joints", Earthq. Spectra, 23(2), 263-289. https://doi.org/10.1193/1.2723150
  5. CEN (2005), Eurocode 8: Design of Structures for Earthquake Resistance. Part 3: Assessment and Retrofitting of Buildings, Stage 64, European Committee for Standardisation, Brussels, March.
  6. Chopra, A.K. and Goel, R.K. (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthq. Eng. Struct. Dyn., 31(3), 561-582. https://doi.org/10.1002/eqe.144
  7. Chopra, A.K. (2007), Dynamics of Structures: Theory and Applications to Earthquake Engineering, 3rd edition, Pearson Prentice-Hall, Upper Saddle River, New Jersey, USA.
  8. Clarke, M. J. and Hancock, G.J. (1990), "A study of incremental-iterative strategies for non-linear analyses", Int. J. Numer. Method. Eng., 29(7), 1365-1391. https://doi.org/10.1002/nme.1620290702
  9. Elmorsi, M., Kianush, M.R. and Tso, W.K. (1998), "Nonlinear Analysis of Cyclically Loaded Reinforced Concrete Structures", ACI Struct. J., 95(6), 725-739.
  10. Fajfar, P. (2000), "A nonlinear analysis method for performance-based seismic design", Earthq. Spectra, 16(3), 573-592. https://doi.org/10.1193/1.1586128
  11. Fajfar, P. and Fischinger, M. (1988), "N2-a method for non-linear seismic analysis of rectangular buildings", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.
  12. FEMA-440 (2005), Improvement of Nonlinear Static Seismic Analysis Procedures, DC: Federal Emergency Management Agency, Washington, USA.
  13. Filippou, F.C., D'Ambrisi, A, and Issa, A. (1992), Nonlinear Static and Dynamic Analysis of Reinforced Concrete Subassemblages, Report No. UCB/EERC-92/08, Earthquake Engineering Research Center, University of California, Berkeley, California.
  14. Fischinger, M., Vidic, T. and Fajfar, P. (1991), "Evaluation of the inelastic response of a RC building with a structural wall designed according to Eurocode 8", Proceedings, International Conference on Buildings with Load Bearing Concrete Walls in Seismic Zones, Paris, France.
  15. Fischinger, M., Vidic, T. and Fajfar, P. (1992), "Nonlinear Seismic Analysis of Structural Walls Using the Multiple-Vertical-Line-Element Model", Nonlinear Seismic Analysis of RC Buildings, Eds. Krawinkler, H. and Fajfar, P., Elsevier Science Publishers Ltd, London and New York.
  16. Hemsas, M. (2010), "Modelisation par macro-elements du comportement non-lineaire des ouvrages a voiles porteurs en beton arme sous action sismique (Developpement de methodes simplifiees d'analyse dynamique et de vulnerabilite sismique)", These de doctorat, Universite de Bordeaux, France.
  17. Hemsas, M., Elachachi, S.M. and Breysse, D. (2009), "Modelisation par macro-elements du comportement non-lineaire des murs voiles en beton arme", Eur. J. Environ. Civil Eng., 13(5), 615-640. https://doi.org/10.1080/19648189.2009.9693137
  18. Hemsas, M., Elachachi, S.M. and Breysse, D. (2010), "Evaluation of the seismic vulnerability of quasi symmetrical reinforced concrete structures with shear walls", Eur. J. Environ. Civil Eng., 14(5), 617-636. https://doi.org/10.1080/19648189.2010.9693250
  19. Hsu, T.T.C. and Zhu, R.R.H. (2002), "Softened membrane model for reinforced concrete elements in shear", ACI Struct. J., 99(4), 460-469.
  20. Kabeyasawa, T., Shiohara, H., Otani, S. and Aoyama, H. (1983), "Analysis of the full-scale seven-story reinforced concrete test structure", J. Facult. Eng., Univ. Tokyo (B), Tokyo, Japan, 37(2), 431-478.
  21. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", ASCE J. Struct. Div., 97(7), 1969-1990.
  22. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. Am. Concrete Ins., 79(1), 13-27.
  23. Krawinkler, H. and Nassar, A.A. (1992), "Seismic design based on ductility and cumulative damage demands and capacities", Eds. Fajfar, P. and Krawinkler, H., Nonlinear seismic analysis and design of reinforced concrete buildings, Elsevier Applied Science, New York.
  24. Lestuzzi, P. and Bachmann, H. (2007), "Displacement ductility and energy assessment from shaking table tests on RC structural walls", Eng. Struct., 29(8), 1708-1721. https://doi.org/10.1016/j.engstruct.2006.09.009
  25. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  26. Mansour, M., Lee, J. and Hsu, T.T.C. (2001), "Cyclic stress-strain curves of concrete and steel bars in membrane elements", ASCE J. Struct. Eng., 127(12), 1402-1411. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1402)
  27. Math-Works Inc. (2007), "Matlab", Inc. Natick, Massachusetts.
  28. Menegotto, M. and Pinto, E. (1973), "Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending". Proceedings of the IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal.
  29. Miao, Z.W., Lu, X.Z., Jiang, J.J. and Ye, L.P. (2006), "Nonlinear FE model for RC shear walls based on multi-layer shell element and microplane constitutive model", Comput. Method. Eng. Sci. EPMESC X, Sanya, Hainan, China, August.
  30. Orakcal, K., Wallace, J.W. and Conte, J.P. (2004), "Flexural modeling of reinforced concrete walls-model attributes", ACI Struct. J., 101(5), 688-699.
  31. Pang, X.D. and Hsu T.T.C. (1995), "Behavior of reinforced concrete membrane elements in shear", ACI Struct. J., 92(6), 665-679.
  32. Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, New York, USA.
  33. Powell, G.H. and Allhabadi, N. (1988), "Seismic damage prediction by deterministic methods: concepts and procedures", Earthq. Eng. Dyn. Struct., 16(5), 719-734. https://doi.org/10.1002/eqe.4290160507
  34. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. Am. Concrete Inst., 79(1), 13-27.
  35. Thomsen, J.H. and Wallace, J.W. (1995), Displacement-Based Design of RC Structural Walls: An Experimental Investigation of Walls with Rectangular and T-Shaped Cross-Sections, Report No. CU/CEE-95/06, Department of Civil Engineering, Clarkson University, Postdam, N.Y.
  36. Thomsen, J.H. and Wallace, J.W. (2004), "Experimental verification of displacement-based design procedures for slender reinforced concrete structural walls", ASCE J. Struct. Eng., 130(4), 618-630. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:4(618)
  37. UBC (1997), Uniform Building Code, International Conference of Building Officials, Whittier, California, USA.
  38. Vamvatsikos, D. and Cornell C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141
  39. Vamvatsikos, D. and Fragiadakis, M. (2010), "Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty", Earthq. Eng. Struct. Dyn., 39(2), 141-163.
  40. Vulcano, A., Bertero, V.V. and Colotti, V. (1988), "Analytical modeling of RC structural walls", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.
  41. Vulcano, A. and Bertero, V.V. (1987), Analytical Models for Predicting the Lateral Response of RC Shear Walls: Evaluation of Their Reliability, EERC, Report No.UCB/EERC-87/19, Earthquake Engineering Research Center, University of California, Berkeley, California.
  42. Wallace, J.W. (1994), "A new methodology for seismic design of reinforced concrete shear walls", ASCE J. Struct. Eng., 120(3), 863-884. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(863)
  43. Wallace, J.W. (1995), "Seismic design of reinforced concrete shear walls, Part I: New Code Format", ASCE J. Struct. Eng., 121(1), 75-87. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:1(75)
  44. Wallace, J.W., Massone, L. and Orakcal, K. (2006), "Seismic performance of existing concrete buildings", 100th Anniversary Earthquake Conference Press Conference, Managing Risk In Earthquake Country, Moscone Center, San Francisco, April.

피인용 문헌

  1. Quantifying the seismic resilience of two tall buildings designed using Chinese and US Codes vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.925
  2. Design principles for stiffness-tandem energy dissipation coupling beam vol.20, pp.1, 2014, https://doi.org/10.12989/sss.2017.20.1.053
  3. Vulnerability of asymmetric multi-storey buildings in the context of performance-based seismic design vol.25, pp.5, 2014, https://doi.org/10.1080/19648189.2018.1548380