DOI QR코드

DOI QR Code

A Study on the Secondary Optimization Analysis based on the Result of Primary Structure Analysis for the Die Thickness

금형두께에 대한 1차 구조해석 결과를 기반으로 한 2차 최적화 해석에 관한 연구

  • Lee, Jong-Bae (School of Mechanical System Engineering, Incheon National University) ;
  • Kim, Sang-Hyun (School of Mechanical System Engineering, Incheon National University) ;
  • Woo, Chang-Ki (School of Mechanical System Engineering, Incheon National University)
  • 이종배 (인천대학교 기계공학부) ;
  • 김상현 (인천대학교 기계공학부) ;
  • 우창기 (인천대학교 기계공학부)
  • Received : 2014.02.26
  • Accepted : 2014.06.12
  • Published : 2014.06.30

Abstract

Generally existing structure analysis was applied to elastic analysis basically in practice. Considering the nonlinear material and the nonlinear geometric to be a more precise analysis, for this reason, The necessity for a structual analysis have been constantly required. Therefore, after optimization is performed, designed a simple model which is applied the principle of nonlinear in this study, a structural analysis of existing experienced users, have a aims at presenting theory and a method in order to perform anyone the analysis easily. In this study, the proposed model applied to die ribs, Regarding the shear load, less strain and stress was generated but strength was sufficient. The initial strain and stress was reconfigured to fit the size and shape, A hyperstudy in conjunction with Abaqus with nonlinear structural analysis, revealed an acceptable maximum and minimum range of stress and under the conditions of minimum strain, the plate made with a constant increment. In the experimental models, the plate thickness was given a power of 40 Newton, according to the thickness of the press die through an iterative process. When the stress and strain was applied to the die thickness, 7-8mm thickness could be obtained by optimizing.

기존의 구조해석은 탄성해석을 일반적으로 실무에서 주축으로 해왔다. 때문에 보다 정밀한 해석을 위하여 재료와 기하학적인 비선형을 고려한 해석의 필요성이 끊임없이 대두되어 왔다. 따라서 본 연구에서는 간단한 모델을 제작하여 비선형 원리를 적용한 최적화를 수행하여 기존의 구조해석의 경험자들은 누구나 용이하게 해석을 수행할 수 있는 이론과 방법을 제시하는데 있다. 본 연구에서 소개되는 모델은 금형 다이리브에 적용될 수 있도록 전단하중에 대하여 충분한 강도로 Strain, Stress가 적게 발생하게 하여, 초기에는 Strain, Stress가 크기에 맞게 형상을 재구성하고 Hyperstudy와 Abaqus 연동에 의한 비선형으로 해석하고 제품에서 허용되는 최대, 최소 Stress 범위와 최소 Strain을 갖는 조건하에서 일정한 증가치를 만들게 하였다. 실험 모델에서 Plate 두께가 40 Newton의 힘으로 주어질 때 Iteration 처리로 금형 두께에 따른 Stress와 Strain에 대한 금형두께에 적용하고자 했을 때 7~8mm 두께가 최적화라는 결론을 얻을 수 있었다.

Keywords

References

  1. Fionn Dunne and Nik Petrinic, "Introduction to computation plasticity", Oxford University, pp. 149-150, 2006.
  2. Dassault System Simulia, "Abaqus/Explicit Advanced Topics Manual", pp. 321-332, 2013.
  3. John Tinsley Oden, "On Introduce Nonlinear finite element analysis", Oxford University press, pp. 113-115, 2010.
  4. Dassault System Simulia, "Abaqus Analysis User's Manual",Vol1 pp, 6.1.2-6.3.0, 2011.
  5. Altair Engineering, inc. "HyperWork/HyperMorph", Morphing Controls, pp. 37-47, 2010.
  6. John Tinsley Oden, "On Introduce Nonlinear finite element analysis", Oxford University press, pp. 393-394, 2010.
  7. Altair Engineering, inc."HyperWork for Abaqus", pp. 114-117, 2010.
  8. Altair Engineering, inc. "HyperStudy Introduction Manual", pp. 39-71, 2010.
  9. Dassault System Simulia, "Abaqus Analysis User's Manual",Vol1 Output, 413, 2011.