References
- M. E. Semmaan, C. A. Quarles, and L. Niciel, "Carbon black and silica as reinforcers of rubber polymers: Doppler broadening spectroscopy results", Polym. Degrad. Stab., 75, 259 (2002). https://doi.org/10.1016/S0141-3910(01)00227-0
- S. S. Choi, B. H. Park, and H. Song, "Influence of filler type content on properties of styrene-butadiene rubber(SBR) compound reinforced with carbon black or silica", Polym. Adv. Technol., 15, 122 (2004). https://doi.org/10.1002/pat.421
- B. B. Boonstra, "Role of particulate fillers in elastomer reinforcement: a review", Polymer, 20, 691 (1979) https://doi.org/10.1016/0032-3861(79)90243-X
- G. Kraus, "A carbon black structure-concentration equivalence principle. application to stress-strain relationships of filled rubbers", Rubber Chem. Technol., 44, 199 (1971). https://doi.org/10.5254/1.3547354
- C. k. Hong, H. Kim, C. Ryu, C. Nah, Y. I. Huh, and S. Kaang, "Effect of particle size and structure of carbon blacks on the abrasion of filled elastomer compounds", J. Mater. Sci., 42, 8391 (2007). https://doi.org/10.1007/s10853-007-1795-3
- A. Schallamach, "Friction and abrasion of rubber", Wear, 1, 384 (1958). https://doi.org/10.1016/0043-1648(58)90113-3
- K. A. Grosch, "The relation between the friction and visco-elastic properties of rubber", Proc. Roy. Soc., A274, 21 (1963).
- A. Schallamach, "Abrasion of rubber by a needle", J. Polym. Sci., 9, 385 (1952). https://doi.org/10.1002/pol.1952.120090501
- A. Schallamach, "Recent advances in knowledge of rubber friction and tire wear", Rubber Chem. Technol., 41, 209 (1968). https://doi.org/10.5254/1.3539171
- A. N. Gent, C. T. R. Pulford, "Mechanisms of rubber abrasion", J. Appl. Polym. Sci., 28, 943 (1983). https://doi.org/10.1002/app.1983.070280304
- A. N. Gent and C. Nah, "Abrasion of rubber by a blade abrader: effect of blade sharpness and test temperature of selected compounds", Rubber Chem. Technol., 69, 819 (1996). https://doi.org/10.5254/1.3538405
- C. Nah, J. Cho, and S. Kaang, "An Improved test method of abrasion of rubber in a blade abrader", Polym. Test., 17, 11 (1998). https://doi.org/10.1016/S0142-9418(97)00025-1
- J. H. Youn and S. Kaang, "Wear behavior of C/B filled NR compounds using a blade-type abrader", Elast. Compos., 49, 73 (2014). https://doi.org/10.7473/EC.2014.49.1.73
Cited by
- Analytical considerations for determination of the microstructures of sulfur-cured solution styrene − butadiene rubbers vol.66, pp.6, 2017, https://doi.org/10.1002/pi.5318