한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제18권3호
  • /
  • Pages.10-19
  • /
  • 2014
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

정현파형 주름강판의 전단좌굴특성 분석

An Investigation of the Shear Buckling Characteristics of Sinusoidal Corrugated Steel Plates

  • 손수덕 (한국기술교육대학교 건축공학부) ;
  • 유미나 (한국기술교육대학교 대학원 건축공학과) ;
  • 이승재 (한국기술교육대학교 건축공학부) ;
  • 강주원 (영남대학교 건축학부)
  • 투고 : 2013.11.01
  • 심사 : 2014.04.07
  • 발행 : 2014.05.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

파형강판은 제형, 정현형 등의 형상으로 얇은 강판을 주름지게 가공한 것으로 두꺼운 평판을 대신하여 사용하여도 높은 면외방향의 강성을 확보할 수 있다. 또한, 아코디언효과로 축방향 강성이 거의 없어 플레이트거더의 웨브에 적용할 경우 웨브가 전단력만을 부담하는 방법으로 쉽게 설계할 수 있다. 그러나 파형강판의 전단좌굴은 평판과는 달리 국부좌굴과 전체좌굴 외에도 이들의 연성에 의해서도 좌굴이 발생하는 매우 복잡한 특성이 있으며, 이러한 연성좌굴에 대한 원인과 특성의 규명은 정현형의 경우 제형보다 연구결과가 부족한 실정이다. 따라서 본 연구에서는 정현형 파형강판의 전단좌굴 특성과 연성좌굴이 발생하는 경향에 대해서 연구하였다. 전단좌굴강도를 계산하기 위해서는 유한요소프로그램을 이용하였고 해석결과를 정해와 비교하였다. 또한, 주름의 두께와 형상 파라메타에 따른 좌굴응력 변화의 특성과 좌굴모드형상의 변화를 분석하였으며, 이들의 결과를 이론식의 결과와 비교하여 좌굴양상의 변화시점에 대해서 분석하였다.

Corrugated steel plates are made by fabricating thin steel plates to have trapezoidal or sinusoidal corrugation, and the corrugated plates are able to maintain high out-of-plane rigidity even when they are used instead of thick flat plates. Also, corrugated steel plates have almost no axial rigidity due to the accordion effect. Thus, if they are applied to the webs of plate girders, designing can be easily conducted so that the webs bear only shear stresses. However, unlike flat plates, the shear buckling of corrugated steel plates has very complex characteristics where buckling occurs due to the interaction of local and global buckling, besides local buckling and global buckling. For the investigation of the cause and characteristics of this interactive buckling, studies on sinusoidal corrugated steel plates are fewer than studies on trapezoidal corrugated steel plates. Therefore, in this study, the shear buckling characteristics of sinusoidal corrugated steel plates and the occurrence pattern of interactive buckling were investigated. For the calculation of shear buckling strength, a finite element program was used, and the analysis results were compared with the exact solution. In addition, the characteristics of buckling stress change and the change of buckling mode shape depending on corrugation thickness and shape parameter were analyzed, and by comparing these results with the results of a theoretical equation, the timing of buckling mode change was analyzed.

키워드

참고문헌

  1. Abbas H. H., Sause R. and Driver R. G. (2002), Shear strength and stability of high performance steel corrugated web girders, Social stability research council conference, 361-388.
  2. Abbas, H., Sause, R., and Driver, R. (2006), Behavior of corrugated web I-girders under in-plane loads, Journal of Engineering Mechanics, 132(8), 806-814. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(806)
  3. Cafolla, J. (1995), Corrugated webs and lateral restraints in plate girders for bridges, Ph.D. thesis. University of Warwick.
  4. Choi, K. T., Ahn, J. H., Park, H. M., Kim, S. H., Jung, S. W. (2009), Behavior of PSC Girder with Partially Corrugated Web, Proceeding of Korea Concrete Institute, 21(1), 47-48.
  5. Easley, J. T., McFarland D. E. (1969), Buckling of light-gage corrugated metal shear diaphragms, Journal of the Structural Division, 95(12), 1497-1516.
  6. Elgaaly, M., Hamilton, R. W., and Seshardri A. (1996), Shear strength of beam with corrugated webs, Journal of Structural Engineering, ASCE, 122(4), 390-398. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(390)
  7. Elgaaly, M., Seshadri, A., and Hamilton, R. (1997), Bending strength of steel beams with corrugated webs, Journal of Structural Engineering, 123(6), 772-782. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(772)
  8. Elgaaly, M., Seshardri A. (1998), Steel Built-up Girder With Trapezoidally Corrugated Webs, AISC Engineering Journal, First Quarter, 1-11.
  9. El-Metwally, A. S. (1998), Prestressed composite girders with corrugated steel webs, Master thesis, University of Calgary.
  10. Gill, H. B., Lee, S. R., Lee, H. E., and Yoon, T. Y. (2004), Shear buckling strength of trapezoidally corrugated steel webs for bridges, Journal of Architectural Institute of Korea, 24(1A), 197-202.
  11. Gill, H. B., Lee, S. R., Lee, H. G., and Lee, P. G. (2003), A Study on the Geometric Parameters that Influence the Shear Buckling of Trapezoidally Corrugated Webs, Journal of Korean Society of Steel Construction, 15(5), 591-602.
  12. Han, T. H. (2000), Elastic shear buckling characteristics of corrugated plates, Ph.D. thesis, Korea university.
  13. Han, T. H., Lim, N. H., Park, N. H., and Kang, Y. J. (2002), Elastic Shear Buckling Characteristics of Circularly Corrugated Plates, Journal of Korean Society of Steel Construction, 14(4), 529-539.
  14. Hyun, G. H. (2002), Shear Buckling Strength of Trapezoidally Corrugated Steel Webs for Bridges, Master thesis, Korea university.
  15. Ibrahim, S. A., El-Dakhakhni, W. W., and Elgaaly, M. (2006), Behavior of bridge girders with corrugated webs under monotonic and cyclic loading, Journal of Engineering Structures, 28(14), 1941-1955. https://doi.org/10.1016/j.engstruct.2006.03.026
  16. Ji, H. S. (2011), Buckling Behaviors of Plate Girder with Corrugated Steel Web, Journal of Korean Society of Steel Construction, 23(2), 221-228.
  17. Kim, S. J., Jeon, J. S., Won, D. H., and Kang, Y. J. (2012), Torsional and Warping Constants of I-shaped Plate Girders with a Sine Corrugated Web, Journal of Korean society of civil engineers, 32(6A), 347-354. https://doi.org/10.12652/Ksce.2012.32.6A.347
  18. Luo, R., Edlund, B. (1996), Shear capacity of plate girders with trapezoidally corrugated webs, Journal of Thin Walled Structures, 26(1), 19-44. https://doi.org/10.1016/0263-8231(96)00006-7
  19. Oh, H. S., Lee, J. W., Jun, B. G. (2011), An experimental assessment on the structural behavior of bolt connected deep corrugated steel plate, Journal of KSMI, 15(3), 79-87.
  20. Oh, H. S., Lee, J. W., Jun, B. G. (2011), An experimental assessment on the structural behavior of bolt connected deep corrugated steel plate, Journal of KSMI, 15(3), 79-87.
  21. Oh, Y. S. (2010), Shear buckling analysis for various geometrical shapes of partially corrugated web, Master thesis, Yonsei university.
  22. Pasternak, H., and Hannebauer, D. (2004), Stahlbau-Kalender 2004-3 Schlanke stabtragwerke, 461-469.
  23. Shon, S. D., Lee, S. J. (2011), Optimum structural design of sinusoidal corrugated web beam using real-valued genetic algorithm, Journal of Korean Society of Steel Construction, 23(5), 581-593.
  24. Shon, S. D., Yoo, M. N., Lee, S. J. (2012), Characteristics of cross-section of sinusoidal corrugated web girder in accordance with minimum weight design, Journal of Korean Society of Steel Construction, 28(10), 73-80.
  25. Shon, S. D., Yoo, M. N., Lee, S. J. (2012), Discrete optimum design of sinusoidal corrugated web girder, Journal of Korean Society of Steel Construction, 24(6), 671-682. https://doi.org/10.7781/kjoss.2012.24.6.671
  26. Sim, J. S., Lee, H. G., Kang, T. S. (2011), A study on the evaluation of design compressive strength and flexural strength of the improved deep corrugated steel plate, Journal of KSMI, 15(3), 155-162.
  27. Sim, J. S., Lee, H. G., Kang, T. S. (2011), A study on the evaluation of design compressive strength and flexural strength of the improved deep corrugated steel plate, Journal of KSMI, 15(3), 155-162.
  28. SIMULIA (2012), ABAQUS/CAE User's Manual, ABAQUS Version 6.12 : abaqus.me.chalmers.se/v6.12/.
  29. Timoshenko, S. P., and Gere, J. M. (1981), Theory of Elastic Stability, 2nd Ed., McGraw-Hill Publishing Co., New York, NY.
  30. Yamazaki, M. (2001), Buckling strength of corrugated webs, Journal of Structural Engineering, ASCE, 47A(1), 19-26.
  31. Yi, J. W., Gil, H. B., Youm, K. S., and Lee, H. E. (2008), Interactive shear buckling behavior of trapezoidally corrugated steel webs, Journal of Engineering Structures, 30(6), 1659-1666. https://doi.org/10.1016/j.engstruct.2007.11.009
  32. Yi, J. W., Gill, H. B., and Lee, H. E. (2005), Elastic Interactive Shear Buckling Behavior of Trapezoidally Corrugated Steel Webs, Journal of Korean Society of Steel Construction, 17(6), 707-715.
  33. Yi, J. W., Gill, H. B., and Lee, H. E. (2005), Elastic interactive shear buckling behavior of trapezoidally corrugated steel webs, Journal of Korean Society of Steel Construction, 17(6), 707-715.
  34. Yoo, M. N., Lee, S. J., and Shon, S. D. (2013), Boundary condition of sinusoidal corrugated plate, Proceeding of Architectural Institute of Korea, 33(1), 349-350.
  35. Yoo, M. N., Shon, S. D., Lee, S. J., Kang, J. W. (2013), A study on shear buckling analysis and boundary condition of sinusoidal corrugated plate by using ABAQUS, Journal of Architectural Institute of Korea, 29(11), 3-11.

피인용 문헌

  1. The Comparative Study on the Shear Buckling Stress of Trapezoidal and Sinusoidal Corrugated Steel Plate vol.30, pp.9, 2014, https://doi.org/10.5659/JAIK_SC.2014.30.9.11