참고문헌
- Shamim, T., Shen, H., Sengupta, S., Son, S. and Adamczyk, A. A., 2002, "A Comprehensive Model to Predict Three-way Catalytic Converter Performance," ASME J. Eng. Gas Turbines Power, Vol. 124, No. 2, pp. 421-428. https://doi.org/10.1115/1.1424295
- Pontikakis, G. and Stamatelos, A., 2006, "Three- Dimensional Catalytic Regeneration Modeling of SiC Diesel Particulate Filters," ASME J. Eng. Gas Turbines Power, Vol. 128, No. 4, pp. 421-433. https://doi.org/10.1115/1.2130732
- Lee, J. S. and Kim, N. Y., 2008, "Characterization of SCR System for Nox Reduction of Diesel Engine (II), "Transactions of the KSPE, Vol. 25, No. 11, pp. 83-89.
- Gulati, S. T., 1985, "Long-Term Durability of Ceramic Honeycombs for Automotive Emissions Control," SAE Tech. Paper No. 850130.
- Baek, S. H., Cho, S. S., Shin, S. G. and Joo, W. S., 2006, "Size Effect on the Modulus of Rupture in Automotive Ceramic Monolithic Substrate using Optimization and Response Surface Method," Trans. Korean Soc. Mech. Eng. A, Vol. 30, No. 11, pp. 1392-1400. https://doi.org/10.3795/KSME-A.2006.30.11.1392
- Lee, S. R. and Cho, S. S., 2013, "A Estimation of Thermal Fatigue Performance in Three-way Catalyst," Transactions of the KAIS, Vol. 14, No. 1, pp. 13-19. https://doi.org/10.5762/KAIS.2013.14.1.13
- Baek, S. H., Kim, S. Y., Seung, S. S., Yang, H., Joo, W. S. and Cho, S. S., 2007, "Experimental Estimation of Thermal Durability in Ceramic Catalyst Supports for Passenger Car," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 12, pp. 1157-1164. https://doi.org/10.3795/KSME-A.2007.31.12.1157
- Hyundai Motors, 1993, Hyundai SONATA II Engine Workshop Manual, Hyundai Motors, Seoul, pp.14-16.
- Norman E.Dowling, 1999, Mechanical Behavior of Materials, Prentice Hall Inc., New Jersey, pp. 239-285
- Gulati, S. T. and Sherwood, D. L., 1991, "Dynamic Fatigue Data for Cordierite Ceramic Wall-Flow Diesel Filters," SAE Tech. Paper No. 910135.
- Rawson, H., 1951, "A Theory of Stresses in Glass Butt Seals," British Journal of Applied Physics, Vol. 2, No. 6, pp. 151-156. https://doi.org/10.1088/0508-3443/2/6/302
- Timoshenko, S. P. and Goodier, J. N., 1970, Theory of Elasticity: 3rd edition, McGraw-Hill, New York, pp. 433-483.
- Gulati, S. T., 1983, "Thermal Stresses in Ceramic Wall Flow Diesel Filters," SAE Tech. Paper No. 830079.
- Gluati, S. T., William, B., Nunan, J., and Anderson, K., 2010, "Fatigue and Performance Data for Advanced Thin Wall Ceramic Catalyst," SAE Tech. Paper No. 980670.
- Baek, S. H., Kim, S. Y., Seung, S. S., Yang, H., Joo, W. S., and Cho, S. S., 2007, "Experimental Estimation of Thermal Durability in Ceramic Catalyst Supports for Passenger Car," Trans. Korean Soc. Mech. Eng. A, Vol. 31, No. 12, pp. 1157-1164. https://doi.org/10.3795/KSME-A.2007.31.12.1157
- Choi, H.J., 2010 An Estimation of Thermal Fatigue in Three-way Catalyst using Thermal Flow and Structure Analysis, A Thesis for a Masterate, Kangwon National University, South Korea, pp. 49-50.