DOI QR코드

DOI QR Code

연륜경사각이 가문비나무 직교형적층재의 정적 휨 강도성능에 미치는 영향

Effect of Annual Ring Angles on Static Bending Strength Performances of Cross-Laminated Woods Made with Spruce

  • 성은종 (경상대학교 환경재료과학과, 농업생명과학연구원) ;
  • 권창배 (경상대학교 환경재료과학과, 농업생명과학연구원) ;
  • 류현수 (경상대학교 환경재료과학과, 농업생명과학연구원) ;
  • 변희섭 (경상대학교 환경재료과학과, 농업생명과학연구원) ;
  • 박한민 (경상대학교 환경재료과학과, 농업생명과학연구원)
  • Sung, Eun-Jong (Department of Environmental Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Kwon, Chang-Bae (Department of Environmental Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Ryu, Hyun-Soo (Department of Environmental Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Byeon, Hee-Seop (Department of Environmental Science, Institute of Agriculture & Life Science, Gyeongsang National University) ;
  • Park, Han-Min (Department of Environmental Science, Institute of Agriculture & Life Science, Gyeongsang National University)
  • 투고 : 2013.09.27
  • 심사 : 2014.03.06
  • 발행 : 2014.05.25

초록

이 연구에서는 가문비나무를 이용하여 직교형적층재를 제작하였고, 섬유직각방향라미나의 연륜경사각이 직교형적층재의 정적 휨 강도성능에 미치는 영향을 조사하였다. 3층 모두가 섬유직각방향라미나로 구성된 평행형적층재($P_{\bot}$ 타입)의 휨 강도성능은 연륜경사각 $90^{\circ}$ > $0^{\circ}$ > $45^{\circ}$의 순이었고, 연륜경사각 $45^{\circ}$에서 휨 탄성계수는 0.0989 GPa, 휨 강도는 3.25 MPa로 가장 적은 값을 나타내었다. $P_{\bot}$ 타입의 중층에 섬유방향라미나를 배열하는 것에 의해 휨 강도성능은 현저히 향상되었다. 표층이 섬유직각방향라미나로 구성된 직교형적층재($C_{\bot}$ 타입)의 경우, 휨 강도성능은 연륜경사각 $90^{\circ}$ > $0^{\circ}$ > $45^{\circ}$의 순이었으나, 연륜경사각에 의한 차이는 평행형적층재에 비해 감소하였다. 중층에 섬유직각방향라미나를 배열한 직교형적층재($C_{\parallel}$ 타입)의 경우, 휨 강도성능은 $P_{\bot}$ 타입 및 $C_{\bot}$ 타입과 다르게 $45^{\circ}$ > $90^{\circ}$ > $0^{\circ}$의 순으로 연륜경사각 $45^{\circ}$에서 휨 탄성계수는 12.0 GPa, 휨 강도는 55.8 MPa로 가장 높은 값을 나타내는 것이 확인되었다.

In this study, cross-laminated woods were made with spruce wood and the effects of annual ring angles of perpendicular direction laminae on static bending strength performance were investigated. Static bending strength performances of parallel laminated woods with all layers composed of laminae perpendicular to the grain ($P_{\bot}$ type) were in the order of $90^{\circ}$ > $0^{\circ}$ > $45^{\circ}$. The MOE and MOR for the $45^{\circ}$ annual ring angle were 0.0989 GPa and 3.25 MPa, and it showed the lowest values. By placing longitudinal-direction laminae in the core of $P_{\bot}$ type, the strength performances were markedly improved. In the case of cross-laminated woods with perpendicular-direction laminae in the faces ($C_{\bot}$ type), the bending strength performances were in the order of $90^{\circ}$ > $0^{\circ}$ > $45^{\circ}$, but the differences among annual ring angles were less than those of the parallel-laminated woods. In the case of cross-laminated woods with perpendicular-direction laminae in the core ($C_{\parallel}$ type), the bending strength performances were in the order of $45^{\circ}$ > $90^{\circ}$ > $0^{\circ}$ unlike $P_{\bot}$ type and $C_{\bot}$ type. The MOE and MOR for the $45^{\circ}$ annual ring angle were 12.0 GPa and 55.8 MPa, and it showed the highest values.

키워드

참고문헌

  1. Cha, J.K. 1996. Study on stress waves for development of glulam from domestic small diameter log (I). Journal of the Korean Wood Science and Technology 24(3): 90-100.
  2. Jang, S.S., Kim, Y.H., Jang, Y.I. 2009. Mechanical properties of composite materials composed of structural steel and structural clued laminated timber. Journal of the Korean Wood Science and Technology 37(4): 300-309.
  3. Keenan, F.J., Kryla, J., Kyokong, B. 1985. Shear strength of spruce glued-laminated timber beams. Canadian Journal of Civil Engineering 12 : 661-672. https://doi.org/10.1139/l85-073
  4. Kim, K.M., Shim, K.B., Park, J.S., Kim, W.S., Lim, J.A., Yeo, H.M. 2007. Development of pitch pine glued laminated timber for structural use. - Improvement of bending capacity of pitch pine glulam by using domestic larch laminars. Journal of the Korean Wood Science and Technology 35(6): 13-22.
  5. Park, H.M., Kang, D.H., Choi, Y.E., Ahn, S.Y., Ryu, H.S., Byeon, H.S. 2010. Bending creep performances of hybrid laminated woods composed of wood-wood based boards. Journal of the Korean Wood Science and Technology 38(1): 1-10. https://doi.org/10.5658/WOOD.2010.38.1.1
  6. Park H.M., Fushitani, M. 2006a. Effects of component ratio of the face and core laminae on static bending strength performances of three-ply cross-lmianted woods panel made with sugi (Cryptomeria japonica). Wood and Fiber Science 38: 278-291.
  7. Park H.M., Fushitani, M., Byeon, H.S. 2009. Derivation of an equation for calculating shear modulus of three-ply laminated material beam from shear moduli of individual laminae and its application. Journal of Wood Science 55: 181-189. https://doi.org/10.1007/s10086-008-1023-z
  8. Park, H.M., Fushitani, M., Sato, K., Kubo, T. 2004. Static bending strength performances of wood -aluminum hybrid laminated material. Transactions of the Materials Research Society of Japan 29(5), 2503-2506.
  9. Park H.M., Fushitani, M., Sato, K., Kubo, T., Byeon. H.S. 2003. Static bending strength performances of cross-laminated woods made with five species. Journal of Wood Science 49: 411-417. https://doi.org/10.1007/s10086-002-0502-x
  10. Park H.M., Fushitani, M., Sato, K., Kubo, T., Byeon, H.S. 2006b. Bending creep performances of three-ply cross-laminated woods made with five species. Journal of Wood Science 52: 220-229. https://doi.org/10.1007/s10086-005-0750-7
  11. Park, H.M., Fushitani, M., Ohtsuka, T., Nakajima, T., Sato, K., Byeon, H.S. 2001.Effect of annual ring angle on static bending strength performances of cross-laminated woods made with sugi wood. Mokuzai Gakkaishi 47(1): 22-32.
  12. Park H.M., Fushitani, M., Kubo, T., Sato, K., Byeon, H.S. 2002. Bending creep performance of cross-laminated sugi wood. Mokuzai Gakkaishi 48(3): 166-177.
  13. Park, H.M., Moon, S.J., Choi, Y.E., Park, J.W., Byeon, H.S. 2009. Static bending strength performances of hybrid laminated woods composed of wood-wood based boards. Journal of the Korean Wood Science and Technology 37(6): 546-555.
  14. Park, J.C., Shin, Y.J., Hong, S.I. 2009. Bending performance of glulam beams reinforced with carbon fiber-reinforced plastics bonded with polyvinyl acetate-based adhesive. Journal of the Korean Wood Science and Technology 37(4): 364-371.
  15. Park, J.C., Shin, Y.J., Hong, S.I. 2009. Bonding performance of glulam reinforced with glass fiber- reinforced plastics. Journal of the Korean Wood Science and Technology 37(4): 357-363.
  16. Hayashi, T., Miyatake, A. 1991. Strength properties of Sugi composite glulam beams (in Japanese). Mokuzai Gakkaishi 37(3): 200-205.
  17. SAKAI, J. 1970. Strength of structures (in Japanese). Gihodo. Tokyo.p. 77.