DOI QR코드

DOI QR Code

A Study on the Torque Characteristics Depending on the Elastic Body Materials of a Hexadecagon Shaped Ultrasonic Motor

탄성체 재질 변화에 따른 16각형 초음파모터의 토크 특성 연구

  • Cheon, Seong-Kyu (Department of Electrical Engineering, Changwon National University) ;
  • Jeong, Seong-Su (Department of Electrical Engineering, Changwon National University) ;
  • Lee, Byung-Ha (Department of Electrical Engineering, Changwon National University) ;
  • Ha, Yong-Woo (Department of Electrical Engineering, Changwon National University) ;
  • Kim, Myong-Ho (Department of Electrical Engineering, Changwon National University) ;
  • Park, Tae-Gone (Department of Electrical Engineering, Changwon National University)
  • Received : 2014.02.25
  • Accepted : 2014.03.27
  • Published : 2014.05.01

Abstract

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.

Keywords

References

  1. C. H. Park, S. S. Jeong, and T. G. Park, J. Korean Physical Society, 6, 887 (2012).
  2. J. W. Kim, C. H. Park, J. H. Lim, S. S. Jeong, J. K. Park, and T. G. Park, J. Cent. South Univ., 20, 71 (2013). https://doi.org/10.1007/s11771-013-1461-7
  3. K. Uchino, FEM and Micromechatronics with ATILA Software (CRC Press, 2008) p. 245.
  4. T. G. Park, H. H. Chong, S. S. Jeong, and K. Uchino, Journal of Electroceramics, 23, 317 (2008).