Design & Manufacturing
- 제8권2호
- /
- Pages.1-6
- /
- 2014
- /
- 2800-0323(pISSN)
- /
- 2733-452X(eISSN)
협 피치 FPC 커넥터의 사출 성형 해석
Injection Molding Analysis for Narrow-Pitched FPC Connectors
- Yoon, Seon-Jin (CNPLUS Co., Ltd.) ;
- Heo, Young-Moo (Mold&Dies Technology R&D Group, Korea Institute of Industrial Technology) ;
- Han, Mu-kun (CNPLUS Co., Ltd.) ;
- Jung, Min-young (CNPLUS Co., Ltd.) ;
-
Kang, Woo-Seung
(Department of Metallurgical and Materials Engineering, Inha Technical College)
- 발행 : 2014.12.01
초록
The narrow-pitched connectors are of interest for small-scale devices such as smart phones because of theirs caling. We conducted an injection molding analysis and a warp analysis for 0.3mm and 0.5mm pitch FPC connectors. We obtained a volumetric shrinkage of 4.344%, a clamping force of 0.2529 tonne, a maximum injection pressure of 76.3 MPa as optimized molding conditions for the 0.3mm pitch FPC connector. We found that, compared with the traditional injection molding technique, the injection molding for narrow-pitched connectors comes with distinct features like low clamping force, high injection molding pressure, and narrow gate size. Adding to the optimization analysis, the deflection of 0.5mm pitch FPC connector was analyzed as well. A maximum deflection of 0.053mm was calculated, which the actual deflection of 0.062mm was compared to. The results deduced a relative error of 17%. We conclude that the deflection analysis along with the optimization analysis can be used as an effective tool to predict the behavior of narrow-pitch connectors although the relative error may need to improve.