대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제40권2호
  • /
  • Pages.223-232
  • /
  • 2014
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지
DOI QR코드

DOI QR Code

성능, 사용성, 환경성 평가를 통한 소형온풍기 설계안 개발 사례

A Case Study of Eco-Design for a Small-Size Electric Heater by Performance, Usability, and Life-Cycle Assessments

  • 이백희 (포항공과대학교 기계산업공학부) ;
  • 유희천 (포항공과대학교 기계산업공학부)
  • Lee, Baekhee (Department of Industrial and Management Engineering, Pohang University of Science and Technology (POSTECH)) ;
  • You, Heecheon (Department of Industrial and Management Engineering, Pohang University of Science and Technology (POSTECH))
  • 투고 : 2013.05.20
  • 심사 : 2013.12.16
  • 발행 : 2014.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Life-cycle assessment (LCA) is often employed to quantify the environmental impact of a product in a comprehensive manner. The aspects of performance and usability as well as that of eco-friendliness should be considered in an integrated manner for the market competitiveness of an eco-friendly product. The present study developed a product improvement plan for an eco-friendly electric heater by benchmarking two small-size electric heaters (companies 'H' and 'T') in terms of performance, usability, and eco-friendliness. The performance measurements such as temperature, humidity, wind speed, noise, and power consumption were collected while the two heaters were operated in a laboratory setting. Then, the usability evaluations such as aesthetics, operation satisfaction, performance satisfaction, and overall satisfaction were surveyed for the two heaters using a 5-point scale (1 for very unsatisfied and 5 for very satisfied). Lastly, the LCA analysis was conducted by following the six-step process of eco-friendly product design provided by KEITI. The analysis results of the two products being integrated with the aspects of product, service, and user, four design improvement directions such as eco-efficient, smart, modularized, and user-support were recommended for an eco-friendly electric heater. These proposed concepts would be useful to develop an eco-friendly electric heater design with a high level of market competitiveness.

키워드

참고문헌

  1. Chung, S., Yi, H., Nam, T., Lee, Y., Jeon, E., and Park, J. (2012), The study of optimization using method by comparison and analysis the diversity pans, In proceedings of the Korean Society for Precision Engineering.
  2. Chung, C. and Koo, H. (1996), A study on methodology and applicationi fo life cycle assessment-concerning semiconductor, Clean Technology, 2(2), 201-213.
  3. Chung, C. and Koo, H. (2002), Study on the application of cleaner production using life cycle assessment in the can industry, Clean Technology, 8(4), 205-215.
  4. Han, S. and Song, B. (2010), Environmental effects evaluation application for the eco-friendly design development of products-with a focus on a case study of automobile FOG LAMP HOUSING, Journal of Korean Society of Design Science, 24(1), 15-26.
  5. Han, S., Yun, M., Kwahk, J., and Hong, S. (2001), Usability of consumer electronic products, International Journal of Industrial Ergonomics, 28(3), 143-151. https://doi.org/10.1016/S0169-8141(01)00025-7
  6. ISO 14040 (2006), Environmental management-Life cycle assessment-Principles and framework, International Organisation for Standardisation (ISO).
  7. Kang, C., Hong, Y., Kim, K., and Park, K. (2011), A Relation-based model for analyzing ecosystems of products, services and stakeholders, Journal of the Korean Institute of Industrial Engineers, 37(1), 41-54. https://doi.org/10.7232/JKIIE.2011.37.1.041
  8. Kim, H., Kwon, Y., Choi, Y., Chung, C., Baek, S., and Kim, Y. (2009), Life cycle assessment on the reuse of glass bottles, Clean Technology, 15(3), 224-230.
  9. Kim, K., Lee, D., and Park, S. (2012), Evaluation of the economic values and optimal deployment timing of R&D investment in new and renewable energy using real option approach, Journal of the Korean Institute of Industrial Engineers, 38(2), 144-156. https://doi.org/10.7232/JKIIE.2012.38.2.144
  10. Korea Society of Waste Management(KSWM) (2005), Study on LCA of plastic containers, The Montyly Packing World, 122-147.
  11. Korea Environmental Industry and Technology Institute(KEITI, 2010), Eco product design process, Retrived from http://ecodesign.konetic.or.kr/04_Comm/02_Pds_List.asp?sltSearchTarget=&txtSearchWord=&szAbsolutePage=1&txtIdx=.
  12. Lee, N., Lee, S., Kim, K., and Hong, T. (2012a), Environmental assessment of chemically strengthened glass for touch screen panel by material life cycle assessment, Clean Technology, 18(3), 301-306. https://doi.org/10.7464/ksct.2012.18.3.301
  13. Lee, S., Cho, N., Kim, B., and Cho, C. (2013), Identifying promising IT products for SMEs under the concept of business ecosystem, Journal of the Korean Institute of Industrial Engineers, 39(1), 61-72. https://doi.org/10.7232/JKIIE.2013.39.1.061
  14. Lee, W., Lee, B., Kim. E., and You, H. (2012b), Ideation of E3 (Eco, Ergonomics, and Economy)-Friendly Products, In Proceedings of the Korean Society for Life Cycle Assessment.
  15. Masui, K., Sakao, T., and Inaba, A. (2001), Quality function development for environment : QFDE(1st report)-a monodology in early stage of DfE, In proceedings of the EcoDesign, 852-857.
  16. Masui, K., Sakao, T., Aizawa, S., and Inaba, A. (2002), Quality function deployment for environment (QFDE) to support design for environment (DFE), In proceedings of the Computers and Information in Engineering.
  17. Na, K., Yang, H., Byun, I., Kim, J., and Jung, Y. (2008), Life cycle assessment of tap water, industrial water, and bottled water, Korean J. LCA, 9(1), 7-19.
  18. Seo, H. (1998), A study on DFD (design for disassembly) for environment friendly product development, Hongik University.