Journal of Electrochemical Science and Technology

The Korean Electrochemical Society (한국전기화학회)
권호 표지
DOI QR코드

DOI QR Code

Practical Challenges Associated with Catalyst Development for the Commercialization of Li-air Batteries

  • Park, Myounggu (Advanced Battery Team, Battery R&D Center) ;
  • Kim, Ka Young (Catalyst Laboratory, Catalyst & Process R&D Center) ;
  • Seo, Hyeryun (Catalyst Laboratory, Catalyst & Process R&D Center) ;
  • Cheon, Young Eun (Catalyst Laboratory, Catalyst & Process R&D Center) ;
  • Koh, Jae Hyun (Catalyst Laboratory, Catalyst & Process R&D Center) ;
  • Sun, Heeyoung (Advanced Battery Team, Battery R&D Center) ;
  • Kim, Tae Jin (Catalyst Laboratory, Catalyst & Process R&D Center)
  • Received : 2013.09.23
  • Accepted : 2013.10.23
  • Published : 2014.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Li-air cell is an exotic type of energy storage and conversion device considered to be half battery and half fuel cell. Its successful commercialization highly depends on the timely development of key components. Among these key components, the catalyst (i.e., the core portion of the air electrode) is of critical importance and of the upmost priority. Indeed, it is expected that these catalysts will have a direct and dramatic impact on the Li-air cell's performance by reducing overpotentials, as well as by enhancing the overall capacity and cycle life of Li-air cells. Unfortunately, the technological advancement related to catalysts is sluggish at present. Based on the insights gained from this review, this sluggishness is due to challenges in both the commercialization of the catalyst, and the fundamental studies pertaining to its development. Challenges in the commercialization of the catalyst can be summarized as 1) the identification of superior materials for Li-air cell catalysts, 2) the development of fundamental, material-based assessments for potential catalyst materials, 3) the achievement of a reduction in both cost and time concerning the design of the Li-air cell catalysts. As for the challenges concerning the fundamental studies of Li-air cell catalysts, they are 1) the development of experimental techniques for determining both the nano and micro structure of catalysts, 2) the attainment of both repeatable and verifiable experimental characteristics of catalyst degradation, 3) the development of the predictive capability pertaining to the performance of the catalyst using fundamental material properties. Therefore, under the current circumstances, it is going to be an extremely daunting task to develop appropriate catalysts for the commercialization of Li-air batteries; at least within the foreseeable future. Regardless, nano materials are expected to play a crucial role in this field.

Keywords

1. INTRODUCTION

In Fig. 1 1-9) a series of remarkable events pertaining to battery inventions (including fuel cells) is depicted in a chronological manner. The Li-air battery was first invented in 1996, utilizing polymer electrolyte (the non-aqueous Li-air cell), although the concept itself was formulated in 1976. However, until today this technology has not been commercialized due to the insurmountable barriers stemming from the lack of appropriate materials used in key components. As of today, Li-ion batteries have become an icon in the field of mainstream batteries. Ever since 1991, their prosperity has been the result of rigorous applications, ranging from electronic devices to electric cars (EVs). The technologies related to Li-ion batteries, such as the synthesis and manufacturing of active materials, separators, electrolytes, and cell assembly, have been rapidly developed over the years. However, focus on the Li-air battery and its recent revival should be noted.10-12) Of course, there could be many reasons for this resurgence, but a rudimentary explanation can be found in the Ragonne plot (not shown here). The Ragonne Plot indicates the specific energy and power performance of a battery system. Specific energy density directly relates to how far an EV can travel. On the other hand, specific power density pertains to how much acceleration an EV can achieve. Currently, these two important performance descriptors demonstrate that the upper limits are going to be reached in the near future (around 2020) where Li-ion batteries are concerned. That is, a specific energy density of 250 Wh/ kg. Furthermore, it should be noted that the anticipated maximum performance of the advanced Li-ion battery still cannot meet the requirements of pure electric vehicles. Therefore, it is reasonable to conclude that the need for the next generation batteries is imminent and indispensible. Thus, it is not all that surprising to see so many researchers and scientists within the battery community paying close attention to Li-air batteries due to high theoretical energy density (gasoline:12,200 Wh/kg while Li-air batteries provide 13,000 Wh/kg, based on the weight of Li metal only, and 5,200 Wh/kg based on the weight of Li metal and oxygen).13) In addition to this, there is a high safety factor to consider, i.e., only one part of the active material is contained in the battery system. Thus, thermal runaway (or short circuit) is unlikely13) in spite of the conceivable shortcomings of the Li-air battery system due to its dependency on oxygen in order to function. Note that this battery system cannot be used in oxygen-free environments such as outer space, implanted heart pacemakers, and underwater conditions. 14)

Fig. 1.Brief History of the Invention of Batteries and Fuel Cells.1-9)

Previously, in an effort to better understand the overall status of Li-air battery research, the authors published a review article covering a rather broad scope of topics.10) As a continuation of this effort, the authors undertook another round of review focusing on the catalysts and it is reported here. In this article, we mainly address the significance of catalysts (i.e., air cathodes), which is unfamiliar to the conventional battery developer. The authors established the following three goals:

1. Understanding catalysts (fundamental concepts and synthesis methods)2. Understanding the role of catalysts in Li-air batteries3. Obtaining perspectives for the commercialization of Li-air batteries

The methodologies utilized to fulfill the above goals are described in the next section, followed by the results. The perspectives gleaned by the authors are from a battery industry viewpoint, and thus may differ from perspectives held by other researchers facing different circumstances.

 

2. METHODS

Peer-reviewed journal articles are invaluable sources of information. Book chapters have also been consulted. The authors appreciate all of the pioneering research efforts exerted by both previous and contem-porary researchers. A web-based search engine has been mainly utilized.15)

 

3. RESULTS

3.1. Key Concepts Related to Catalysts

It has been shown that the catalyst in an air electrode is a crucially important component, as it can dictate the power and energy density, energy efficiency and cycle life of Li-air batteries.128) In this section fundamental concepts related to catalysts are addressed in a succinct manner.

General concept. A catalyst is normally defined as a material that can change the kinetic rate of a chemical reaction while the catalyst itself doesn’t change.16) Changing the kinetic rate indicates the acceleration or deceleration of the rate induced by the function of a catalyst. For most cases, however, the catalysts are used to accelerate the reaction rates. The catalyst plays the role of reducing the activation energy of a specific reaction and enhancing the reaction rate. For non-catalytic reactions, products are made by the collisions between reactive molecules. On the other hand, catalytic reactions occur through the adsorption of reactant molecules and desorption of product molecules.

Constituents of catalyst system. A catalyst is normally comprised of an active material and a supporting material. The active material is deposited on, or chemically bounded with, a porous support that has a large surface area. An active material is directly related to a chemical reaction rate, and various materials are used such as metals, metal oxides, and metal sulfides. Sometimes “Promoters” (or additives) are added into a catalyst system. The promoters have no catalytic activity, but they can affect the activity of a catalyst, either chemically or electronically.

Major properties of catalysts. The important properties of a catalyst are: activity, selectivity, and lifetime. 17-19) The activity refers to the ability of a catalyst to convert reactant molecules at a single active site. Selectivity is the fraction of a desired product among all the products. Selectivity is concerned when a reactant can be converted to several products, or when a desired product is in an intermediate stage and then might be converted into other materials. Lifetime is of great interest, especially from a cost reduction point of view. Catalysts lose their initial activity due to various reasons including coking, poisoning and sintering.

Types of catalyst reactions. Generally, there are two types of catalytic reactions: oxidation-reduction reactions (electronic) and acid-base reactions (ionic).20) Oxidation-reduction type reactions include oxidation, reduction, hydrogenation, dehydrogenation and hydrogenolysis (catalyzed by solids possessing free or easily excited electrons, i.e., metals), while acid-base type reactions include polymerization, isomerization, cracking, dehydration, alkylation, halogenations and dehalogenation (catalyzed by acidic or basic properties).

Surface reactions on catalysts. For heterogeneous catalysts, the surface reaction proceeds through: (1) diffusion of reactant molecules into the catalyst, (2) adsorption of the diffused reactants on the catalyst surface, (3) reaction between adsorbed molecules, (4) desorption of the product molecules from the catalyst surface, and (5) diffusion of the products into the bulk stream. Diffusion can be divided into “external diffusion” and “internal diffusion”. Adsorption, desorption, and reaction are affected by chemical properties, whereas diffusion is affected by physical properties, such as fluid velocity and pore structure (Fig. 2). Therefore, it is of great importance to understand the reactions at the internal and external surface of catalysts, along with the effects of pore structure, for the further development of Li-air cathode catalysts.

Fig. 2.Surface Reaction on Heterogeneous Catalysts.

Surface area of catalysts. The total surface area of a catalyst is the sum of all the surface areas of pores with various sizes. For a given mass, the surface area of a catalyst is inversely related to the size of the pores. Thus, the surface area of a catalyst having a high percentage of small pores is larger than that of a catalyst having a high percentage of large pores. Also there are two kinds of pores depending on the formation process i.e., interstitial and internal pores. The interstitial pores are formed between the primary particles within the aggregated particles, and the internal pores are formed inside the primary particles. Therefore, external surfaces include all the outer surfaces of catalysts and aggregated catalysts, while the internal surface is composed of all the surfaces of the internal pores.21)

3.2. Synthesis Methods of Catalysts

External and internal morphologies of catalysts synthesized by various methods play a crucial role in the catalytic activities. When it comes to catalyst synthesis it can be broadly classified into two main methods− impregnation and colloidal, both of which are well documented for noble metal based catalysts (e.g., Pt, Pd, Ru). Meanwhile, sputtering and heat treatment methods22-26) have been newly explored in transition metal based catalysts (e.g., Fe, Co, Mo) and metal-free carbon catalysts.27,28) In this section two main synthesis methods are briefly summarized.

Impregnation method. Impregnation is the most widely utilized method, due to its simplicity, high dispersion on the support, and the easy scale-up for mass production. Features of impregnation method are summarized in Table 1.29-34) This method is widely used for preparing ORR catalysts; e.g., the carbon supported Pt and Pd nanoparticles.35,36) As for the general procedures, it is as follows: the calculated amount of active metal precursor (e.g., H2PtC16 xH2O, RuC13, Na6Pt(SO3)4, and Na6Ru(SO3)4) is dissolved in a medium, such as alcohol and/or water. For a better dispersion of the metal precursor, a citric acid can be added as a stabilizer.37) The solution and carbon support are mixed with mild stirring. The carbon support loaded with the active metal precursor is then incubated in an oven at 100℃ overnight, and then treated with various reducing agents. Depending on the phase of the reducing agent, there are various methods including the hydrogen gas reduction method31,32) and the liquid reduction method.29,35,38-41) Recently carbide based catalysts (e.g., Pt-W2C/C, Co6Mo6C2/C) prepared by combining the impregnation and microwave heating methods have been intensively studied.41-44)

Table 1.Features of the Impregnation Method29-34)

Colloidal method. The major disadvantages of the impregnation method are related to low activity, broad particle size distribution, and tendency to be easily aggregated. To overcome these drawbacks, the colloidal method has been developed, and is often used in the studies of Pt/C, Pd/C, and PtRu/C catalysts45-47) (Fig. 3). A general description of the colloidal procedure48-50) is as follows (Table 246,51,52)): 1) preparing a colloidal solution containing metal nanoparticles with stabilizers (e.g., tetraoctylammonium bromide (TOAB), Polyvinylpyrrolidone (PVP), and 1-propanol) and 2) depositing metal nanoparticles onto the surface of carbon supports.

Fig. 3.General Process of the Impregnation Method.

Table 2.Features of the Colloidal Method51,46,52)

3.3. Roles of Catalysts in Li-air Cells

Based on the nature of the electrolytes and its reaction products, Li-air cells can be classified broadly into two types;53) i.e., non-aqueous and hybrid (also see Fig. 1 and 2 in ref.10)). The roles of catalysts are expected to differ for each type of Li-air cell (Table 3 54)).

Table 3.Comparison of Li-air Cells: Non-aqueous vs. Aqueous Electrolytes54)

Roles of catalysts in non-aqueous Li-air cells. The reaction mechanisms at the interfaces between the aircathode and the electrolyte are inevitably affected by Li2O2 formed inside the pores. Micro-pores and some of meso-pores are blocked by Li oxide during cycling and the surface area of those pores will not be accessed by either air or electrolyte, making them unavailable for the electrochemical reaction. Thus the manipulation of the carbon support’s pore structure are observed to be more central issues55-58) although active catalyst materials themselves are researched a lot. Thus the selection of appropriate support materials is quite significant. To fulfill these unique requirements, carbon blacks (e.g., Acetylene Black, Vulcan XC-72, Ketjen Black) have been mainly adopted. The properties of a carbon support, such as the specific surface area, porosity, morphology, surface functional groups, electronic conductivity, and corr-osion resistance, must be down-selected in order to make an appropriate catalyst system. Currently Vulcan XC-72 with a surface area of approximately 250m2g−1 has been widely utilized.21,59) However, note that an accessible and sufficiently large surface area of carbon blacks for maximum catalyst dispersion has been argued to be a necessary, albeit insufficient condition, for obtaining optimized carbon sup-ported catalysts.60-67) Overall, a salient observation is that the main roles of catalysts seem to control the morphology and accommodate Li2O2.68)

Roles of Catalysts in Hybrid Li-air cells. In hybrid Liair cells, the role of catalysts can be clearly defined; it is to control the binding energy between oxygen species and metal surfaces. Because bound oxygen species are intermediates in the oxygen reduction reaction, the level of binding energy can have significant effects on catalytic activity.69) For metal surfaces that bind oxygen too weakly, the rate is limited by either the dissociation of O2 or the transfer of electrons to adsorbed O2, i.e., possible rate-limiting step can be dictated by different oxygen reduction mechanisms. Also, if Pt binds oxygen too strongly the catalytic activity is negatively affected. Therefore, in order to achieve better electrocatalystic activity, optimal binding energy should be acquired for each particular catalyst system. 70) A major advantage of the binding energy approach (utilizing the characteristics of electronic structure; i.e., HOMO and LUMO), is to provide a way to predict the electrocatalytic activity of a metal surface.

3.4. Survey of Catalyst Research in Li-air Cells

Catalysts vs. overpotential. Overpotential (and capacity) values of non-aqueous and hybrid Li-air cells utilizing various catalysts are summarized in Table 413,71-91) and Table 553,92,133,154,164) respectively. Also refer to Fig. 4130) for non-aqueous Li-air cells and Figs 5, 6, 793) for hybrid Li-air cells regarding discharge/ charge plots and corresponding overpotentials. The results summarized in Table 4 imply that the dif-ferent overpotential values on discharge/charge of non-aqueous Li-air cells may be related to the different orientations and morphologies of the oxide precipitates. 94-96) Catalysts can affect the choice of the specific reaction path and thus affect the appearance and structure of the specific intermediates. 97,98) Among various catalyst systems for nonaqueous Li-air cells, PtAu (bifunctional catalyst) on carbon support and nitrogen-doped carbon are reported to have the best performance in terms of overpotential reduction.99) Also, various carbon materials are demonstrated as active catalysts;12,85-88,100-102) e.g., carbon nanotubes. Nonetheless, the consensus is that the effect of various catalyst systems examined so far is obscure and there is no dominant one yet to be found. Controversy over the effects of catalysts can be partly ascribed to undetermined ORR and OER mechanisms.103,128) Most of all, the asymmetric discharge/charge curve (larger overpotential value for charge) is a distinctive feature indicating the significance and urgency of catalyst development for the charge process.

Table 4.1) Overvoltage and capacity values are based on the 1st discharge/charge cycle as reported in the literature 2) ′ ⁄ C′ ′ MnO2, ⁄ ′, ′ ⁄ RbRO′ and ′ ⁄ RGO′ indicate that the support material are carbon, manganese oxide, lead ruthenium, and reduced graphene oxide respectively 3) Except otherwise explicitly described as ‘bulk’ materials in the report, we classify them as nano-sized materials 4) A = Pb or Bi, B = Ru or Ir 5) The prefixes, such as α-, β-, γ-, λ-, represent polymorphs of MnO2 6) Except otherwise stated, all catalysts are monofunctional 7) PtAu is a bifunctional catalyst 8) Nano means nanostructured materials including nanoparticle, nanocrystals, nanowires, nanotubes, nanobelts and nanoflowers 9) ′Nano ⁄ nano′ indicates that nano-size substrate materials are decorated with nano-size catalysts

Table 5.1) Overvoltage and capacity values are based on 1st discharge/charge cycle as reported in the literature 2) Generally, overvoltage and capacity are influenced by current density and catalyst loadings 3) FePc: Fe phthalocyanine 4) GNS: graphene nanosheet 5) AB: Acetylene Black 6) In this particular case, the hybrid Li-air cells were operating at 60℃

Fig. 4.Cycling Performance of a non-aqueous Type Li-air Cell.130)

Fig. 5.Cycling Performance of a Hybrid Type Li-air Cell (Pt 0%).93)

Fig. 6.Cycling Performance of a Hybrid Type Li-air Cell (Pt 10%).93)

Fig. 7.Cycling Performance of a Hybrid Type Li-air Cell (Pt 40%).93)

Different reaction paths of hybrid Li-air cells depending on catalyst materials and utilized electrolytes (alkaline or acidic) are summarized in Tables 6 and 7.104,105) Noble metals (especially Pt) have been proved to be the best so far for ORR.106) However, Pt catalyst has been found to be not effective for oxygen evolution reaction (OER) due to the formation of a stable oxide layer. In the case of Ru catalyst, it is better than Pt for oxygen evolution. However, Ru catalyst is still problematic due to corrosion limiting its lifetime. As cost-effective alternatives to noble metals, investigation on noble metal oxides (e.g., RuO2 or IrO2) and transition metal oxides (e.g., NiCo2O4, spinel) have been on-going. Some transition metal oxides show good performance in oxygen evolution (particularly spinel) so far. Development of low-cost catalysts is going to be a key factor for the successful commercialization of Li-air battery.

Table 6.1) General formula of Perovskite type oxides: their properties are varied depending on the nature of A and B 2) General formula of Pyrochlore type oxides: their properties are varied depending on the nature of A and B

Table 7.Two-electron Reduction Pathways and Catalysts104,105)

In another example, concerning Co3O4/RGO catalyst, it has been observed that this catalyst does not act as a conventional one to lower the activation energy (or overpotential) via providing a higher-rate reaction path. Rather, it acts as a kind of ‘promoter’ to enhance surface transport (or mass transport) of LixO2 species during cycling90) and the ultimate effects are the same (i.e., reduction of overpotential).

Nanostructured Catalysts. The nano-sized catalyst’s role in reducing discharge/charge overpotentials has been widely researched107-111) (see also Table 4). It is based on very straightforward and intuitive reasoning that the specific catalyst activity increases as the surface area per gram of the catalyst increases, i.e., the smaller the size of the catalyst particle the greater the catalyst activity. For non-aqueous Li-air cells, the á- MnO2 nanowire catalysts have been discussed as one of the excellent low-cost catalyst candidates. Various nanostructured MnO2 materials (e.g., nanocrystals, nanotubes, nanofiber, and dendritic clusters) are mixed with nano-sized carbon-based materials (e.g., carbon black, carbon foam, and graphite). Recent calculations and experiments have suggested that nano-structured substrates decorated with nano-sized catalysts are also very promising.84,112,113) For example, if Ptclusters are deposited onto a graphene support, the oxygen-reduction activity is observed to be much higher.120) Therefore, there are good grounds for the implementation of carbon-based nanomaterials; e.g., carbon nanotubes and graphene as support materials 114-116) to accommodate a larger amount of Li oxide.117,118) Regarding metal nanoparticles they are good candidates as well because their catalytic properties can be considerably higher than that of bulk metals. However, it has been suggested that when the sizes of catalyst particles are within the nanometer range, specific catalyst activity does not always follow the above rationale. Often the actual relation between specific catalyst activity and size is largely dependent on the particular type of catalyst;114,119-123) e.g., Pt particles were found to show maximal mass catalyst activity124) when their size is ranging from 2 to 4 nm. Note that in the case of the Au catalyst, the particle size for maximum activity is smaller than that of Pt catalyst.125-127)

 

4. DISCUSSION

In this section challenges related to non-aqueous and the hybrid Li-air cell are briefly discussed: These challenges are unique for each system for the development of catalyst.

4.1. Issues Regarding Organic Type Li-air Cells

As for non-aqueous Li-air cells, conceivable different chemical reactions are depicted in Fig. 8.12,128-142) The reaction route producing Li2O, compared to that of producing Li2O2, seems to be beneficial because a larger capacity is expected: However, it was found to increase irreversibility considerably. Other alternative reaction routes producing intermediate products are reported as well.128,142-144) Most of all, organic electrolytes, Li salts (e.g., LiBOB), and binders (e.g., PVdF) are observed to react with superoxide (O2 −), and to decompose during discharge.145) During charge, the oxidation of decomposed electrolyte products is involved in CO2 146) and H2O production instead of O2. In addition to reactions induced by superoxide (O2 −), chemical reactions between Li2O2 (it is strongly nucleophilic like O2 −) and solvent are very problematic because they can produce carbonate which will ultimately limit the rechargeability of Li-air cells.147) In short, problems associated with the scantiness of stable electrolytes138,149) toward reduced oxygen species and discharge product is the single biggest hurdle to overcome before the non-aqueous cells can be commercialized, 138,139,141,148-152) not to mention the need for further catalyst study. Recent reports even argue that active catalyst material may not be a necessary component based on the kinetic overpoentials study.153) Overall, these complex issues are hampering the development of appropriate catalysts for the air cathode of non-aqueous Li-air cells.

Fig. 8.Suggested Chemical Reactions During Discharge.12,128-142)

4.2. Issues Regarding Hybrid Type Li-air Cells

An outstanding difference between the hybrid and non-aqueous Li-ai r cel l s l ies in the cel l structures53,133,134,-156) and, unlike non-aqueous Li-air cells, the hydrid Li-air cell’s oxygen reduction reactions (ORR) at air cathode is well established, particularly in the case of Pt157) and carbon surfaces in alkaline solution.158,159) Chemical reactions at air cathode are critically dependent on the acid-base characteristics of aqueous electrolytes, i.e., acidic, neutral, or basic.160) From the cycling data of hybrid Li-air cells (Figs 5, 6, and 7), the effects of Pt catalysts are eminent. The role of catalysts has been observed to be critical in the reduction of overpotential. However, this does not indicate that there are no technical issues to be tackled. On the contrary, there are numerous technical obstacles including the limited lifetime of catalysts due to dissolution of Co catalysts161-163), the corrosion of Pt catalysts in alkaline electrolytes,162) and the non-catalyst problems such as the instability of LiSICON in strong basic or alkaline electrolytes,155,163) interfacial impedance increase due to insoluble phase formation,164) electrolyte degradation (e.g., CO2 in ambient air can react with alkaline electrolytes (LiOH, NaOH, and KOH) producing insoluble carbonate,134) and Li dendrite formation129,165) on the surface of Li metal. Finding a well matched pair of catalyst and aqueous electrolyte is still a hindrance in the development of hybrid Li-air cells, although it is not as deep a concern as is the case with non-aqueous Li-air cells. Most of all, the low-cost catalyst, which is alternating the expensive precious metal ones (e.g., Pt), is going to be one of the key factors in the commercialization of the Hybrid Li-air cell.

 

5. CONCLUDING REMARKS & PERSPECTIVES

The survey of previous research on catalysts clearly indicates that efforts have been primarily focused on the non-aqueous Li-air cell and its performance enhancement. The tendency toward more research of non-aqueous Li-air cells is based on the notion that these cells are expected to excel their hybrid counterparts in terms of gravimetric and volumetric energy density;133) i.e., less numbers of components are required for the final cell assembly. However, appropriate heterogeneous catalysts for non-aqueous Li-air cells have not yet appeared. Difficulties in developing suitable catalysts stem from considerable complexity in relation to the analysis of Li-air cell’s performance due to many involved parameters. These parameters, including pore structure of carbon support materials, 80,166,167) the choice of electrolytes (the viscosity, oxygen solubility, and ionic conductivity),82,168,169) wettability between electrolyte and electrode,167,170) binder, and the thickness of the electrode,171) if not properly sorted out, will obscure catalysts’ effects in the nano- and macro-scale. Thus, approaches for catalyst R&D should be multidisciplinary.19,120,123,172) Regarding hybrid Li-air cells, there are also various parameters associated with cell performance, such as cathodic potential, oxygen purity, mass flow rate, cathode surface area, pH, and temperature.159) However, this is a wholly different kind of challenge compared to that of non-aqueous Li-air cells as pointed out in the discussion section: No suitable electrolyte for nonaqueous Li-air cells has yet been discovered, and it is still a matter of controversy concerning the effects of catalysts due to undetermined ORR and OER mechanisms. The unavailability of reliable platforms is pertinent to the sluggish pace of catalyst development for non-aqueous Li-air batteries. In the case of hybrid Liair cells, it is not uncommon to see that the current catalyst R&D is heavily resorted to the conventional catalysts developed (or being developed) for other metalair batteries (or fuel cells): The control of morphology and orientation of crystal plane and its defect sites.75,89,173-177) Still, in many cases platinum (Pt) is considered and adopted as the best catalyst,176) although there are many reasons to devote research to developing cost-effective alternatives (e.g., perovskites, spinels, and pyrochlores20) from the commercialization standpoint.

One of the prominent features regarding catalysts based on previous research is that all the catalysts are fabricated in nano-scale and nano-structure. Peculiarities in the microstructure of catalysts such as vacancies and defects are found to play a critically important role in determining the performance of Li-air batteries. Thus, inevitably there will be challenges related to the mass production of nano-structured catalysts, particularly in terms of controlling its crystal structure as required by specifications, i.e., morphology, defects, vacancies.89) This perspective is based on the knowledge that nanomaterials are not always mass production friendly. However, despite these drawbacks, it is expected that nanomaterials will remain as a promising catalyst candidate for Li-air batteries, with the gradual maturity of related core technologies for upscale and mass production. In reality, for the commercialization success of Li-air batteries, simple and low cost catalyst production schemas should be devised.

References

  1. Maggie Farley. Summit Decrees 6% Reduction in Main Global Warming Gases; Diplomacy: Delegates agree to cut six major pollutants below 1990 levels. Accord will change how nations produce and use power. Action on concessions requested by U.S. delayed, Los Angeles Times, Section Part: A, Start Page: 1, Dec 11, (1997).
  2. James Larminie, and John Lowry. Electric Vehicle Technology Explained, John Wiley & Sons, pp. 1 - 21, (2003).
  3. Michael Root. The TAB Battery Book, McGrow-Hill, pp. 13-34, (2011).
  4. Isidor Buchmann. Batteries in a Portable World, Cadex Electronics Inc. (Cadex), pp. 19-26, (2001).
  5. Source: http://www.wired.com/autopia/2010/02/first-voltrolls- off-the-line-nov-1/ (accessed on November 22, 2011).
  6. http://www.chevrolet.com/volt-electric-car/ (accessed on November 22, 2011).
  7. Source: http://automobiles.honda.com/fcx-clarity/ (access -ed on November 22, 2011).
  8. Source: http://www.nissanusa.com/leaf-electric-car/index- #/leaf-electric-car/index (accessed on November 22, 2011).
  9. Source:http://worldwide.hyundai.com/company-overview /news-view.aspx?idx=295&nCurPage=1&strSearchColunm=& strSearchWord=&ListNum=211 (accessed on December 7, 2011).
  10. Myounggu Park, Heeyoung Sun, Hyungbok Lee, Junesoo Lee, and Jaephil Cho. Lithium-Air Batteries: Survey on the Current Status and Perspectives Towards Automotive Applications from a Battery Industry Standpoint. Advanced Energy Materials, 2, 780 (2012). https://doi.org/10.1002/aenm.201200020
  11. Robert Black, Brian Adams, and L.F. Nazar. Non- Aqueous and Hybrid Li-$O_{2}$ Batteries. Advanced Energy Materials, 2, 801 (2012). https://doi.org/10.1002/aenm.201200001
  12. Junbo Hou, Min Yang, Michael W. Ellis, Robert B. Moore, and Baolian Yi. Lithium oxides precipitation in nonaqueous Li-air batteries. Phys. Chem. Chem. Phys., 14, 13487 (2012). https://doi.org/10.1039/c2cp42768k
  13. H. Cheng and K. Scott. Carbon-supported manganese oxide nanocatalysts for rechargeable lithium-air batteries, J. Power Sources, 195, 1370 (2010). https://doi.org/10.1016/j.jpowsour.2009.09.030
  14. C. L. Mantell. Batteries and Energy Systems, 2nd Edition. McGraw-Hill, New York, pp. 82-92, (1983).
  15. Source: www.sciencedirect.com (accessed on February 15, 2013)
  16. Robert L. Burwell Jr. Manual of Symbols and Terminology for Physicochemical Quantities and Units - Appendix II Heterogeneous Catalysis. Advances in Catalysis, 26, 351 (1977).
  17. L. Louis Hegedus, Robert W. McCabe. Catalyst Poisoning. Marcel Dekker, New York, pp. 1-46, (1984).
  18. R. Hughes. Deactivation of Catalysts. Academic Press, New York, pp. 1 - 28 (1984).
  19. Handbook of Heterogeneous Catalysis. Edited by G. Ertl, H. Knozinger, J. Weitkamp. VCH, Weinheim, pp. 1 - 48 (1997)
  20. John Happel, Miguel Hnatow, Laimonis Bajars. Base Metal Oxide Catalysts. Marcel Dekker, New York, pp. 1 - 191 (1977).
  21. A. S. Arico, S. Srinivasan, V. Antoucci. Fuel cells, 2, 133 (2001).
  22. Bin Wang. Recent development of non-platinum catalysts for oxygen reduction reaction. Journal of Power Sources, 152, 1 (2005). https://doi.org/10.1016/j.jpowsour.2005.05.098
  23. Lei Zhang, Jiujun Zhang, David P. Wilkinson, Haijiang Wang. Journal of Power Sources, Progress in preparation of non-noble electrocatalysts for PEM fuel cell reactions. 156, 171 (2006). https://doi.org/10.1016/j.jpowsour.2005.05.069
  24. P. Bogdanoff, I. Herrmann, M. Hilgendorff, I. Dorbandt, S. Fiechter, H. Tributsch. Probing Structural Effects of Pyrolysed CoTMPP-based Electrocatalysts for Oxygen Reduction via New Preparation Strategies. J. New Mater. Electrochem. Syst., 7, 85 (2004).
  25. I. Herrmann, V. Bruser, S. Fiechter, H. Kersten, P. Bogdanoff. Electrocatalysts for Oxygen Reduction Prepared by Plasma Treatment of Carbon-Supported Cobalt Tetramethoxyphenylporphyrin, J. Electrochem. Soc., 152, A2179 (2005). https://doi.org/10.1149/1.2041887
  26. M. Hampden-Smith, P. Atanassova, T.T. Kodas. Fuel Cell Technology and Application, in: W. Wielstich, H.A. Gasteiger, A. Lamm (Eds.), Handbook of Fuel Cells- Fundamentals, Technology and Applications, Vol. 3, John Wiley & Sons, Chapter 40, Chichester, 2003
  27. L. Qu, Y. Liu, J.B. Baek, L. Dai. Nitrogen-Doped Graphene as Efficient Metal-Free Electrocatalyst for Oxygen Reduction in Fuel Cells, ACS Nano, 4, 1321 (2010). https://doi.org/10.1021/nn901850u
  28. K. Gong, F. Du, Z. Xia, M. Durstock, and L. Dai. Nitrogen-doped carbon nanotube arrays with high electrocatalytic activity for oxygen reduction. Science, 323, 760 (2009). https://doi.org/10.1126/science.1168049
  29. H. William, A. Valdecir, R. Gonzalez. Electrochim. Acta, 47, 3715 (2002). https://doi.org/10.1016/S0013-4686(02)00341-9
  30. T.C. Deivaraj, J.Y. Lee. J. Power Sources, 142, 43 (2005). https://doi.org/10.1016/j.jpowsour.2004.10.010
  31. B. Yang, Q. Lu, Y. Wang, L. Zhang, J. Lu, P. Liu. Chem. Mater., 15, 3552 (2003). https://doi.org/10.1021/cm034306r
  32. K.A. Friedrich, L.P. Geyzers, A.J. Dickinson, U. Stimming. J. Electroanal. Chem., 524/525, 262 (2003).
  33. Y. Takasu, T. Fujiwara, Y. Murakami, K. Sasaki, M. Oguri, T. Asaki,W. Sugimoto. J. Electrochem. Soc., 147, 4421 (2000). https://doi.org/10.1149/1.1394080
  34. A.J. Dickinson, L.P.L. Carrette, J.A. Collins, K.A. Friedrich, U. Stimming. Electrochim. Acta, 47, 3733 (2002). https://doi.org/10.1016/S0013-4686(02)00343-2
  35. Guangli Che, Brinda B. Lakshmi, Ellen R. Fisher, and Charles R. Martin. Carbon nanotubule membranes for electrochemical energy storage and production. Nature, 393, 346 (1998). https://doi.org/10.1038/30694
  36. H. Cheng, K. Scott. Selection of oxygen reduction catalysts for rechargeable lithium-airbatteries-Metal or oxide? Applied Catalysis B: Environmental, 108/109, 140 (2011). https://doi.org/10.1016/j.apcatb.2011.08.021
  37. J.W. Guo, T.S. Zhao, J. Prabhuram, R. Chen, C.W. Wong. Preparation and characterization of a PtRu/C nanocatalyst for direct methanol fuel cells. Electrochimica Acta, 51,754 (2005). https://doi.org/10.1016/j.electacta.2005.05.056
  38. K. Tsurumi, T. Nakamura, A. Sato, US Patent 4,956,331,1990
  39. A. Antolini, F. Cardellini. Formation of carbon supported PtRu alloys: an XRD analysis. Journal of Alloys and Compounds, 315, 118 (2001). https://doi.org/10.1016/S0925-8388(00)01260-3
  40. E. Lust, E. Hark, J. Nerut, K. Vaarmets. Pt and Pt-Ru catalysts for polymer electrolyte fuel cells deposited onto carbide derived carbon supports. Electrochimica Acta, 101, 130 (2013). https://doi.org/10.1016/j.electacta.2012.10.024
  41. X. Ma, H. Meng, M. Cai, P.K. Shen. Bimetallic carbide nanocomposite enhanced Pt catalyst with high activity and stability for the oxygen reduction reaction. J. Am. Chem. Soc., 134, 1954 (2012). https://doi.org/10.1021/ja2093053
  42. H. Meng, P.K. Shen. J. Phys. Chem. B, 109, 22705(2005). https://doi.org/10.1021/jp054523a
  43. O. Savadogo, K. Lee, K. Oishi, S. Mitsushima, N. Kamiya, K.-I. Ota. New palladium alloys catalyst for the oxygen reduction reaction in an acid medium. Electrochemistry Communications, 6, 105 (2004). https://doi.org/10.1016/j.elecom.2003.10.020
  44. C.Z. Deng, M.J. Dignam. Sputtered Cobalt-Carbon- Nitrogen Thin Films as Oxygen Reduction Electrocatalysts. J. Electrochem. Soc., 145, 3507 (1998). https://doi.org/10.1149/1.1838835
  45. J. Prabhuram, X. Wang, C.L. Hui, T. Hsing. Synthesis and characterization of surfactant-stabilized Pt/C nanocatalysts for fuel cell applications. Journal of Physical Chemistry B, 107, 11057 (2003).
  46. T. Kim, M. Takahashi, M. Nagai, K. KobayashiElectrochem. Acta, 50, 813 (2004).
  47. X. Xue, T. Lu, C. Liu, W. Xing. Chem. Commun., 12,1601 (2005).
  48. R. Narayanan, M.A. El-Sayed. Carbon-supported spherical palladium nanoparticles as potential recyclable catalysts for the Suzuki reaction. Journal of Catalysis, 234, 348(2005). https://doi.org/10.1016/j.jcat.2005.06.024
  49. C. Wang, H. Daimon, Y.M. Lee, J.M. Kim, and S. Sun. Synthesis of Monodisperse Pt Nanocubes and Their Enhanced Catalysis for Oxygen Reduction. J. Am. Chem. Soc., 129, 6974 (2007). https://doi.org/10.1021/ja070440r
  50. K. Okaya, H. Yano, K. Kakinuma, M. Watanabe, and H. Uchida. Temperature Dependence of Oxygen Reduction Reaction Activity at Stabilized Pt Skin-PtCo Alloy/ Graphitized Carbon Black Catalysts Prepared by a Modified Nanocapsule Method. ACS Appl. Mater. Interfaces, 4, 6982 (2012). https://doi.org/10.1021/am302224n
  51. X. Wang, I. Hsing. Electrochem. Acta, 47, 2897 (2002).
  52. U.A. Paulus, U. Endruschat, G.J. Feldmeyer, T.J. Schmidt, H. Bonnemann, R.J. Behm. J. Catal., 195, 383(2000). https://doi.org/10.1006/jcat.2000.2998
  53. Hui He, Wei Niu, Nina Mahootcheian Asl, Jason Salim, Rongrong Chen, Youngsik Kim. Effects of aqueous electrolytes on the voltage behaviors of rechargeable Liair batteries. Electrochimica Acta, 67, 87 (2012). https://doi.org/10.1016/j.electacta.2012.02.001
  54. Alexander Kraytsberg, Yair Ein-Eli. Review on Li-air batteries-Opportunities, limitations and perspective. Journal of Power Sources, 196, 886 (2011). https://doi.org/10.1016/j.jpowsour.2010.09.031
  55. Jang-Soo Lee, Sun Tai Kim, Ruiguo Cao, Nam-Soon Choi, Meilin Liu, Kyu Tae Lee, and Jaephil Cho. Metal- Air Batteries with High Energy Density: Li-Air versus Zn-Air, Advanced Energy Materials, 1, 34 (2011). https://doi.org/10.1002/aenm.201000010
  56. X. Ren, S.S. Zhang, D.T. Tran, J. Read, J. Mater. Chem, 21,10118 (2011). https://doi.org/10.1039/c0jm04170j
  57. Doretta Capsoni, Marcella Bini, Stefania Ferrari, Eliana Quartarone, Piercarlo Mustarelli. Recent advances in the development of Li-air batteries. Journal of Power Sources, 220, 253 (2012). https://doi.org/10.1016/j.jpowsour.2012.07.123
  58. Chris Tran, Xiao-Qing Yang, Deyang Qu. Investigation of the gas-diffusion-electrode used as lithium/air cathode in non-aqueous electrolyte and the importance of carbon material porosity. Journal of Power Sources, 195, 2057(2010). https://doi.org/10.1016/j.jpowsour.2009.10.012
  59. Y. Takasu, T. Kawaguchi, W. Sugimoto, Y. Murakami. Electrochim. Acta, 48, 3861 (2003). https://doi.org/10.1016/S0013-4686(03)00521-8
  60. M. Uchida, Y. Fukuoka, Y. Sugawara, H. Ohara, A. Ohta. J. Electrochem. Soc, 145, 3708 (1998). https://doi.org/10.1149/1.1838863
  61. M. L. Anderson, R. M. Stroud, D. R. Rolison. Nano Lett., 2, 235 (2002). https://doi.org/10.1021/nl015707d
  62. G. Park, T. Yang, Y. Yoon, W. Lee, C. Kim. Int. J. Hydrogen Energy, 28, 645 (2003). https://doi.org/10.1016/S0360-3199(02)00140-4
  63. M. Mastragostino, A. Mossiroli, F. Soavi. J. Electrochem. Soc., 151, 1919 (2004). https://doi.org/10.1149/1.1805751
  64. V. Rao, P.A. Simonov, E.R. Savinova, G.V. Plaksin, S. Cherepanova, G. Kryukova, U. Stimming. Journal of Power Sources, 145, 178 (2005). https://doi.org/10.1016/j.jpowsour.2004.12.064
  65. Z. Wang, G. Yin, P. Shi. Carbon, 44, 133 (2005).
  66. K.Y. Chan, J. Ding, J. Ren, S. Cheng, K.Y. Tsang. J. Mater. Chem., 14, 505 (2004). https://doi.org/10.1039/b314224h
  67. Hansan Liu, Chaojie Song, Lei Zhang, Jiujun Zhang, Haijiang Wang, David P.Wilkinson. A review of anode catalysis in the direct methanol fuel cell. Journal of Power Sources, 155, 95 (2006). https://doi.org/10.1016/j.jpowsour.2006.01.030
  68. Chris Tran, Xiao-Qing Yang, Deyang Qu. Investigation of the gas-diffusion-electrode used as lithium/air cathode in non-aqueous electrolyte and the importance of carbon material porosity. Journal of Power Sources, 195, 2057(2010). https://doi.org/10.1016/j.jpowsour.2009.10.012
  69. Chun-Yaung Lu and Graeme Henkelman. Role of Geometric Relaxation in Oxygen Binding to Metal Nanoparticles. J.Phys.Chem.Lett, 2, 1237, (2011). https://doi.org/10.1021/jz200372e
  70. Vojislav Stamenkovic, Bongjin Simon Mun, Karl J.J. Mayrhofer, Philip N. Ross, Nenad M. Markovic, Jan Rossmeisl, Jeff Greeley, and Jens K. Norskov. Changing the Activity of Electrocatalysts for Oxygen Reduction by Tuning the Surface Electronic Structure, Angew.Chem.Int.Ed., 45, 2897 (2006). https://doi.org/10.1002/anie.200504386
  71. Aurelie Debart, Jianli Bao, Graham Armstrong, Peter G. Bruce. An $O_{2}$ cathode for rechargeable lithium batteries: The effect of a catalyst. Journal of Power Sources, 174, 1177 (2007). https://doi.org/10.1016/j.jpowsour.2007.06.180
  72. Aurelie Debart, Allan J. Paterson, Jianli Bao, and Peter G. Bruce. $\alpha$-$MnO_{2}$ Nanowires: A catalyst for the $O_{2}$ Electrode in Rechargeable Lithium Batteries. Angew. Chem., Int. Ed., 47, 4521 (2008). https://doi.org/10.1002/anie.200705648
  73. Ku-Bong Chung, Ju-Kyung Shin, Tae-Young Jang, Dong-Kyun Noh, Yongsug Tak, and Sung-Hyeon Baeck. Preparation and analyses of $MnO_{2}$ carbon composites for rechargeable lithium-air battery. Rev. Adv. Mater. Sci., 28, 54 (2011).
  74. Yi-Chun Lu, Hubert A. Gasteiger, Michael C. Parent, Vazrik Chiloyan, and Yang Shao-Horn. The Influence of Catalysts on Discharge and Charge Voltages of Rechargeable Li-Oxygen Batteries. Electrochemical and Solid-State Letters, 13, A69 (2010). https://doi.org/10.1149/1.3363047
  75. Yi-Chun Lu, Zhichuan Xu, Hubert A. Gasteiger, Shuo Chen, Kimberly Hamad-Schifferli, and Yang Shao-Horn. Platinum-Gold Nanoparticles: A Highly Active Bifunctional Electrocatalyst for rechargeable Lithium-Air Batteries. Journal of the American Chemical Society, 132, 12170 (2010). https://doi.org/10.1021/ja1036572
  76. Si Hyoung Oh and Linda F. Nazar. Oxide Catalysts for Rechargeable High-Capacity Li-$O_{2}$ Batteries. Advanced Energy Materials, 2, 903 (2012). https://doi.org/10.1002/aenm.201200018
  77. Si Hyoung Oh, Robert Black, Ekaterina Pomerantseva, Jin-Hyon Lee, and Linda F. Nazar. Synthesis of a metallic mesoporous pyrochlore as a catalyst for lithium- $O_{2}$ batteries. Nature chemistry. 4, 1004 (2012). https://doi.org/10.1038/nchem.1499
  78. Arjun Kumar Thapa, Kazuki Saimen, and Tatsumi Ishihara. Pd/$MnO_{2}$ Air Electrode Catalyst for Recharegable Lithium/Air Battery. Electrochem. Solid- State Lett., 13, A165 (2010). https://doi.org/10.1149/1.3481762
  79. Arjun Kumar Thapa, Tatsumi Ishihara. Mesoporous $\alpha$- $MnO_{2}$/Pd catalyst air electrode for rechargeable lithiumair battery. J. Power Sources, 196, 7016 (2011). https://doi.org/10.1016/j.jpowsour.2010.09.112
  80. Arjun Kumar Thapa, Yuiko Hidaka, Hidehisa Hagiwara, Shintaro Ida, and Tatsumi Ishihara. Mesoporous $\alpha$-$MnO_{2}$ Air Electrode Modified with Pd for Rechargeability for Lithium-Air Battery. J. Electrochem. Soc., 158, A1483 (2011). https://doi.org/10.1149/2.090112jes
  81. L. Trahey, C.S. Johnson, J.T. Vaughey, S.-H. Kang, L.J. Hardwick, S.A. Freunberger, P.G. Bruce, and M.M. Thackeray. Activated Lithium-Metal-Oxides as Catalytic Electrodes for Li-$O_{2}$ Cells, Electrochem. Solid-State Lett., 14, A64 (2011). https://doi.org/10.1149/1.3555366
  82. Jie Xiao, Wu Xu, Deyu Wang, and Ji-Guang Zhang. Hybrid Air-Electrode for Li/Air Batteries, J. Electrochem. Soc., 157, A294 (2010). https://doi.org/10.1149/1.3280281
  83. Takeshi Ogasawara, Aurelie Debart, Michael Holzapfel, Petr Novák, and Peter G. Bruce. Rechargeable $Li_{2}O_{2}$ Electrode for Lithium Batteries. J. Am. Chem. Soc., 128, 1390 (2006). https://doi.org/10.1021/ja056811q
  84. Jiaxin Li, Ning Wang, Yi Zhao, Yunhai Ding, Lunhui Guan. $MnO_{2}$ Nanoflakes coated on multi-walled carbon nanotubes for rechargeable lithium-air batteries. Electrochem. Commun., 13, 698 (2011). https://doi.org/10.1016/j.elecom.2011.04.013
  85. Yongliang Li, Jiajun Wang, Xifei Li, Jian Liu, Dongsheng Geng, Jinli Yang, Ruying Li, Xueliang Sun.Nitrogen-doped carbon nanotubes as cathode for lithiumair batteries. Electrochem. Commun., 13, 668 (2011). https://doi.org/10.1016/j.elecom.2011.04.004
  86. Padmakar Kichambare, Jitendra Kumar, Stanley Rodrigues, Binod Kumar. Electrochemical performance of highly mesoporous nitrogen doped carbon cathode in lithium-oxygen batteries. J. Power Sources. 196, 3310(2011). https://doi.org/10.1016/j.jpowsour.2010.11.112
  87. Bing Sun, Bei Wang, Dawei Su, Linda Xiao, Hyojun Ahn, Guoxiu Wang. Graphene nanosheets as cathode catalysts for lithium-air batteries with an enhanced electrochemical performance. Carbon, 50, 727 (2012). https://doi.org/10.1016/j.carbon.2011.09.040
  88. Yin Yang, Qian Sun, Yue-Sheng Li, Hong Li, and Zheng- Wen Fu. Nanostructured Diamond Like Carbon Thin Film Electrodes for Lithium-Air Batteries. Journal of The Electrochemical Society, 158, B1211 (2011). https://doi.org/10.1149/1.3623431
  89. Jin-Hyon Lee, Robert Black, Guerman Popov, Ekaterina Pomerantseva, Feihong Nan, Gianluigi A. Botton, and Linda F. Nazar. The role of vacancies and defects in $Na_{0.44}MnO_{2}$ nanowire catalysts for lithium-oxygen batteries. Energy & Environmental Science, DOI:10.1039/c2ee21543h, 2012
  90. Robert Black, Jin-Hyon Lee, Brian Adams, Charles A. Mims, and Linda F. Nazar. The Role of Catalysts and Peroxide Oxidation in Li-$O_{2}$ Batteries. Angew. Chem. Int. Ed., 52, 392 (2013). https://doi.org/10.1002/anie.201205354
  91. Dawei Su, Hyun-Soo Kim, Woo-Seong Kim, Guoxiu Wang. A study of PtxCoy alloy nanoparticles as cathode catalysts for lithium-air batteries with improved catalytic activity. Journal of Power Sources, in press, 2012
  92. Long Wang, Xin Zhao, Yuhao Lu, Maowen Xu, Dawei Zhang, Rodney S. Ruoff, Keith J. Stevenson, and John B. Goodenough. $CoMn_{2}O_{4}$ Spinel Nanoparticles Grown on Graphene as Bifunctional Catalysts for Lithium-Air Batteries. Journal of The Electrochemical Society, 158,A1379 (2011). https://doi.org/10.1149/2.068112jes
  93. Dockyoung Yoon, Kyongsik Kim, Myounggu Park, Sangjin Kim, Heeyoung Sun, Hyungbok Lee, Junesoo Lee. An effort to Understand the Basic Characteristics of Hybrid Li-air Performance., ECS Fall Meeting, Poster Presentation, Hawaii, US, 2012
  94. Jonathan R. Harding, Yi-Chun Lu, Yasuhiro Tsukada, and Yang Shao-Horn. Evidence of catalyzed oxidation of $Li_{2}O_{2}$ for rechargeable Li-air battery applications. Physical Chemistry Chemical Physics, 14, 10540 (2012). https://doi.org/10.1039/c2cp41761h
  95. Bryan D. McCloskey, Rouven Scheffler, Angela Speidel, Donald S. Bethune, Robert M. Shelby, A.C. Luntz. On the Efficacy of Electrocatalysis in Nonaqueous Li-$O_{2}$ Batteries. Journal of the American Chemical Society, 133, 18038 (2011). https://doi.org/10.1021/ja207229n
  96. Sheng S. Zhang, Donald Foster, Jeffrey Read. Discharge characteristics of a non-aqueous electrolyte Li/$O_{2}$ battery. J. Power Sources, 195, 1235 (2010). https://doi.org/10.1016/j.jpowsour.2009.08.088
  97. Yi-Chun Lu, Hubert A. Gasteiger, Ethan Crumlin, Robert McGuire, Jr., Yang Sho-Horn. Electrocatalytic Activity Studies of Select Metal Surfaces and Implications in Li- Air Batteries. Journal of the Electrochemical Society, 157, A1016 (2010). https://doi.org/10.1149/1.3462981
  98. Jingzhe Chen, Jens S. Hummelshoj, Kristian S. Thygesen, Jon S.G. Myrdal, Jens K. Norskov, Tejs Vegge. The role of transition metal interfaces on the electronic transport in lithium-air batteries. Catalysis Today, 165, 2 (2011). https://doi.org/10.1016/j.cattod.2010.12.022
  99. Yi-Chun Lu, Hubert A. Gasteiger, and Yang Shao-Horn. Catalytic Activity Trends of Oxygen Reduction Reaction for Nonaqueous Li-Air Batteries. Journal of the American Chemical Society, 133, 19048 (2011). https://doi.org/10.1021/ja208608s
  100. G.Q. Zhang, J.P. Zheng, R. Liang, C. Zhang, B. Wang, M. Hendrickson, and E.J. Plichta. Lithium-Air Batteries Using SWNT/CNF Bucky-papers as Air Electrodes. Journal of the Electrochemical Society, 157, A953 (2010). https://doi.org/10.1149/1.3446852
  101. Kim Kinoshita. Carbon. John Wiley & Sons, New York, pp. 226 - 292, 1998.
  102. Alvin B. Stiles. Catalyst Supports and Supported Catalysts. Butterworths, Boston, pp. 107 - 137, 1987
  103. Ruiguo Cao, Jang-Soo Lee, Meilin Liu, and Jaephil Cho. Recent Progress in Non-Precious Catalysts for Metal-Air Batteries. Advanced Energy Materials, 2, 816 (2012). https://doi.org/10.1002/aenm.201200013
  104. Ludwig Jorissen. Bifunctional oxygen/air electrodes. Journal of Power Sources, 155, 23 (2006). https://doi.org/10.1016/j.jpowsour.2005.07.038
  105. F. Bidault, D.J.L. Brett, P.H. Middleton, N.P. Brandon. Review of gas diffusion cathodes for alkaline fuel cells. Journal of Power Sources, 187, 39 (2009). https://doi.org/10.1016/j.jpowsour.2008.10.106
  106. John W. Moore, Conrad L. Stanitski, Peter C. Jurs. Chemistry, Second Edition. Thomson, Toronto Canada, pp.164 - 213, 2005
  107. Y.-C. Lu, H. A. Gasteiger, E. Crumlin, R. McGuire, Y. Shao-Horn. Electrocatalytic Activity Studies of Select Metal Surfaces and Implications in Li-air Batteries. J. Electrochem. Soc., 157, A1016 (2010). https://doi.org/10.1149/1.3462981
  108. A. Debart, J. Bao, G. Armstrong, P.G. Bruce. An $O_{2}$ Cathode for Rechargeable Lithium Batteries: The effect of a Catalyst. J. Power Sources, 174, 1177 (2007). https://doi.org/10.1016/j.jpowsour.2007.06.180
  109. A. Debart, A.J. Paterson, J. Bao, P.G. Bruce. $\alpha$-$MnO_{2}$ Nanowires: A catalyst for the $O_{2}$ Electrode in Rechargeable Lithium Batteries. Angew. Chem., Int. Ed., 47, 4521 (2008). https://doi.org/10.1002/anie.200705648
  110. Y.-C. Lu, H.A. Gasteiger, M. C. Parent, V. Chiloyan, Y. Shao-Horn. The Influence of Catalysts on Discharge and Charge Voltages of Rechargeable Li-Oxygen Batteries. Electrochem. Solid-State Lett. 13, A69 (2010). https://doi.org/10.1149/1.3363047
  111. Y.-C. Lu, Z. Xu, H. A. Gasteiger, S. Chen, K. Hamad- Schifferli, Y. Shao-Horn. Platinum-Gold nanoparticles: A Highly Active Bifunctional Electrocatalyst for Rechargeable Lithium-Air Batteries. J. Am. Chem. Soc., 132, 12170 (2010). https://doi.org/10.1021/ja1036572
  112. Alexander Kraytsberg, Yair Ein-Eli. The impact of nanoscaled materials on advanced metal-air battery systems. Nanoenergy, in press, 2013
  113. D. Thiele, E. Lopez-Camacho Colmenarejo, B. Grobety, A. Zuttel. Synthesis of carbon nanotubes on $La_{0.6}Sr_{0.4}CoO_{3}$ as substrate. Diamond & Related Materials, 18, 34 (2009). https://doi.org/10.1016/j.diamond.2008.08.001
  114. Yuyan Shao, Sheng Zhang, Chongmin Wang, Zimin Nie, Jun Liu, Yong Wang, Yuehe Lin. Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction. Journal of Power Sources, 195, 4600(2010) https://doi.org/10.1016/j.jpowsour.2010.02.044
  115. Ioanna Fampiou and Ashwin Ramasubramaniam. Binding of Pt Nanoclusters to Point Defects in Graphene: Adsorption, Morphology, and Electronic Structure. Journal of Physical Chemistry C, Vol. 116, pp. 6543-6555, 2012
  116. Robert R. Mitchell, Betar M. Gallant, Carl V. Thompson and Yang Shao-Horn. All-carbon-nanofiber electrodes for high-energy rechargeable Li-$O_{2}$ batteries. Energy & Environmental Science, Vol. 4, pp. 2952 - 2958, 2011 https://doi.org/10.1039/c1ee01496j
  117. E. M. Benbow, S. P. Kelly, L. Zhao, J. W. Reutenauer, and S. L. Suib. Oxygen Reduction Properties of Bifunctional a-Manganese Oxide Electrocatalysts in Aqueous and Organic Electrolytes. The Journal of Physical Chemistry C, 115, 22009 (2011). https://doi.org/10.1021/jp2055443
  118. Lei Jin, Linping Xu, Christine Morein, Chun-hu Chen, Monique Lai, Saminda Dharmarathna, Arthur Dobley, and Steven L. Suib. Titanium Containing $\alpha$-$MnO_{2}$(TM) Hollow Spheres: One-step Synthesis and Catalytic Activities in Li/Air Batteries and Oxidative Chemical Reactions. Advanced Functional Materials, 20, 3373 (2010). https://doi.org/10.1002/adfm.201001080
  119. Rong Kou, Yuyan Shao, Donghai Wang, Mark H. Engelhard, Ja Hun Kwak, Jun Wang, Vilayanur V. Viswanathan, Chongmin Wang, Yuehe Lin, Yong Wang, Ilhan A. Aksay, Jun Liu. Enhanced activity and stability of Pt catalysts on functionalized graphene sheets for electrocatalytic oxygen reduction. Electrochemical Communications, 11, 954 (2009). https://doi.org/10.1016/j.elecom.2009.02.033
  120. Takashi Yumura, Keisuke Kimura, Hisayoshi Kobayashi, Ryo Tanaka, Norio Okumura and Tokio Yamabe. The use of nanometer-sized hydrographene species for support material for fuel cell electrode catalysts:a theoretical proposal. Physical Chemistry Chemical Physics, 11, 8275 (2009). https://doi.org/10.1039/b905866d
  121. Ryan J. Gilliam, Donald W. Kirk, Steven J. Thorpe. Influence of Structural, Microstructural and Electrical Properties on Electrocatalytic Performance at the Nanoscale. Electrocatalysis, 2, 1 (2011). https://doi.org/10.1007/s12678-011-0038-1
  122. A.Z. Moshfegh. Nanoparticle catalysts. Journal of Physics D: Applied Physics, 42, 23301, (2009).
  123. G.A. Tritsaris, J. Greeley, J. Rossmeisl, J.K. Norskov. Atomic-Scale Modeling of Particle Size Effects for the Oxygen Reduction Reaction on Pt. Catalysis Letters, 141, 909 (2011). https://doi.org/10.1007/s10562-011-0637-8
  124. Hubert A. Gasteiger, Shyam S. Kocha, Bhaskar Sompalli, Frederick T. Wagner. Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs. Applied Catalysis B: Environmental, 56, 9 (2005). https://doi.org/10.1016/j.apcatb.2004.06.021
  125. Minhua Shao, Krista Shoemaker, Amra Peles, Keiichi Kaneko, and Lesia Protsailo. Pt Monolayer on Porous Pd-Cu Alloys as Oxygen Reduction Electrocatalysts. Journal of the American Chemical Society, 132, 9253(2010). https://doi.org/10.1021/ja101966a
  126. Francisco J. Perez-Alonso, David N. McCarthy, Anders Nierhoff, Patricia Hernandez-Fernandez, Christian Strebel, Ifan E.L. Stephens, Jane H. Nielsen, and Ib Chorkendorff. The Effect of Size on the Oxygen Electroreduction Activity of Mass-Selected Platinum Nanoparticles. Angewandte Chemie International Edition, 51, 4641 (2012). https://doi.org/10.1002/anie.201200586
  127. Ifan E.L. Stephens, Alexander S. Bondarenko, Ulrik Gronbjerg, Jan Rossmeisl, and Ib Chorkendorff. Understanding the electrocatalysis of oxygen reduction on platinum and its alloys. Energy and Environmental Science, 5, 6744 (2012). https://doi.org/10.1039/c2ee03590a
  128. Yuyan Shao, Sehkyu Park, Jie Xiao, Ji-Guang Zhang, Yong Wang, and Jun Liu. Electrocatalysts for Nonaqueous Lithium-Air Batteries: Status, Challenges, and perspective. ACS Catalysis, 2, 844 (2012). https://doi.org/10.1021/cs300036v
  129. Doron Aurbach, Ella Zinigrad, Yaron Cohen, Hanan Teller. A short review of failure of lithium metal and lithiated graphite anodes in liquid electrolyte solutions. Solid State Ionics, 148, 405 (2002). https://doi.org/10.1016/S0167-2738(02)00080-2
  130. Linda F. Nazar. Overcoming the Challenges in Li-$O_{2}$ Batteries, Special Lecture, SK innovation, June 22, 2012
  131. Robert Black, Si Hyoung Oh, Jin-Hyon Lee, Taeeun Yim, Brian Adams, and Linda F. Nazar. Screening for Superoxide Reactivity in Li-$O_{2}$ Batteries: Effect on $Li_{2}O_{2}$/LiOH Crystallization. Journal of the American Chemical Society, 134, 2902 (2012). https://doi.org/10.1021/ja2111543
  132. Cormac O. Laoire, Sanjeev Mukerjee, and K.M. Abraham. Elucidating the Mechanism of Oxygen Reduction for Lithium-Air Battery Applications. The Journal of Physical Chemistry C, 113, 20127 (2009). https://doi.org/10.1021/jp908090s
  133. Eunjoo Yoo, Haoshen Zhou. Fe phthalocyanine supported by graphene nanosheet as catalyst in Li-air battery with the hybrid electrolyte. Journal of Power Sources, in press, 2013
  134. Fouad Ghamouss, Mohamed Mallouki, Bruno Bertolotti, Linda Chikh, Cedric Vancaeyzeele, Severine Alfonsi, Odile Fichet. Long lifetime in concentrated LiOH aqueous solution of air electrode protected with interpenetrating polymer network membrane. Journal of Power Sources, 197, 267 (2012). https://doi.org/10.1016/j.jpowsour.2011.09.052
  135. Vyacheslav S. Bryantsev, Vincent Giordani, Wesley Walker, Mario Blanco, Strahinja Zecevic, Kenji Sasaki, Jasim Uddin, Dan Addison, Gregory V. Chase. Predicting Solvent Stability in Aprotic Electrolyte Li-Air Batteries: Nucleophilic Substitution by the Superoxide Anion Radical ($O_{2}^{\Pi}$). Journal of Physical Chemistry A, 115, 12399 (2011). https://doi.org/10.1021/jp2073914
  136. Naba K. Karan, Mahalingam Balasubramanian, Timothy T. Fister, Anthony K. Burrell, and Peng Du. Bulk- Sensitive Characterization of the Discharged Products in Li-$O_{2}$ Batteries by Nonresonant Inelastic X-ray Scattering. Journal of Physical Chemistry C, 116, 18132 (2012). https://doi.org/10.1021/jp306298e
  137. S. H. Overbury, Viviane Schwartz, David R. Mullins, Wenfu Yan, Sheng Dai. Evaluation of the Au size effect: CO oxidation catalyzed by Au/$TiO_{2}$. Journal of Catalysis, 241, 56 (2006). https://doi.org/10.1016/j.jcat.2006.04.018
  138. Stefan A. Freunberger, Yuhui Chen, Zhangquan Peng, John M. Griffin, Laurance J. Hardwick, Fanny Barde, Petr Novak, and Peter G. Bruce. Reactions in the Rechargeable Lithium-$O_{2}$ Battery with Alkyl Carbonate Electrolytes. Journal of the American Chemical Society, 133, 8040 (2011). https://doi.org/10.1021/ja2021747
  139. Yuhui Chen, Stefan A. Freunberger, Zhangquan Peng, Fanny Barde, and Peter G. Bruce. Li-$O_{2}$ Battery with a Dimethylformamide Electrolyte. Journal of the American Chemical Society, 134, 7952 (2011).
  140. Si Hyoung Oh, Taeeun Yim, Ekaterina Pomerantseva, and Linda F. Nazar. Decomposition Reaction of Lithium Bis(oxalate)borate in the Rechargeable Lithium-Oxygen Cell. Electrochemical and Solid-State Letters, 14, A185(2011). https://doi.org/10.1149/2.003112esl
  141. B.D. McCloskey, D.S. Bethune, R.M. Shelby, G. Girishkumar, and A.C. Luntz. Solvents' critical Role in Nonaqueous Lithium-Oxygen Battery Electrochemistry. The Journal of Physical Chemistry Letters. 2, 1161(2011). https://doi.org/10.1021/jz200352v
  142. Zhangquan Peng, Stefan A. Freunberger, Laurence J. Hardwick, Yuhui Chen, Vincent Giordani, Fanny Barde, Petr Novak, Duncan Graham, Jean-Marie Tarascon, Peter G. Bruce. Oxygen Reactions in a Non-Aqueous $Li^{+}$ Electrolyte. Angewandte Chemie, 50, 6351 (2011). https://doi.org/10.1002/anie.201100879
  143. Laurence J. Hardwick, Peter G. Bruce. The pursuit of rechargeable non-aqueous lithium-oxygen battery cathodes. Current Opinion in Solid State and Materials Science, 16, 178 (2012). https://doi.org/10.1016/j.cossms.2012.04.001
  144. Jusef Hassoun, Fausto Croce, Michel Armand, Bruno Scrosati. Investigation of the $O_{2}$ Electrochemistry in a polymer Electrolyte Solid-State Cell. Angewandte Chemie International Edition, 50, 2999 (2011). https://doi.org/10.1002/anie.201006264
  145. Donald T. Sawyer. Oxygen Chemistry. Oxford University Press, New York, pp. 160 - 187, 1991.
  146. B.D. McCloskey, A. Speidel, R. Scheffler, D.C. Miller, V. Viswanathan, J.S. Hummelshoj, J.K. Norskov, and A.C. Luntz. Twin Problems of Interfacial Carbonate Formation in Nonaqueous Li-$O_{2}$ Batteries. The Journal of Physical Chemistry Letters. 3, 997 (2012). https://doi.org/10.1021/jz300243r
  147. B. D. McCloskey, D. S. Bethune, R. M. Shelby, T. Mori, R. Scheffler, A. Speidel, M. Sherwood, and A. C. Luntz. Limitations in Rechargeability of Li-$O_{2}$ Batteries and Possible Origins. The Journal of Physical Chemistry Letters, 3, 3043 (2012). https://doi.org/10.1021/jz301359t
  148. Stefan A. Freunberger, Yuhui Chen, Zhangquan Peng, John M. Griffin, Laurence J. Hardwick, Fanny Barde, Petr Novak, and Peter G. Bruce. Reactions in the Rechargeable Lithium-$O_{2}$ Battery with Alkyl Carbonate Electrolytes. Journal of the America Chemical Society, 133, 8040 (2011). https://doi.org/10.1021/ja2021747
  149. Stefan A. Freunberger, Yuhui Chen, Nicholas E. Drewett, Laurence J. Hardwick, Fanny Barde, Peter G. Bruce. The Lithium-Oxygen Battery with Ether-Based Electrolytes. Angew. Chem., Int. Ed., 50, 8609 (2011). https://doi.org/10.1002/anie.201102357
  150. Gabriel M. Veith, Nancy J. Dudney, Jane Howe, and Jagjit Nanda. Spectroscopic Characterization of Solid Discharge Products in Li-Air Cells with Aprotic Carbonate Electrolytes. The Journal of Physical Chemistry C, 115, 14325 (2011).
  151. Hui Wang, Kai Xie. Investigation of oxygen reduction chemistry in ether and carbonate based electrolytes for Li-$O_{2}$ batteries. Electrochimica Acta, 64, 29 (2012). https://doi.org/10.1016/j.electacta.2011.12.080
  152. Rajeev S. Assary, Larry A. Curtiss, Paul C. Redfern, Zhengcheng Zhang, and Khalil Amine. Computational Studies of Polysiloxanes: Oxidation Potentials and Decomposition Reactions. The Journal of Physical Chemistry C. 115, 12216 (2011). https://doi.org/10.1021/jp2019796
  153. Bryan D. McCloskey, Rouven Scheffler, Angela Speidel, Girish Girishkumar, and Alan C. Luntz. On the Mechanism of Nonaqueous Li-$O_{2}$ Electrochemistry on C and Its Kinetic Overpotentials: Some Implications for Li- Air Batteries. The Journal of Physical Chemistry C, 116, 23897 (2012). https://doi.org/10.1021/jp306680f
  154. Yunfeng Li, Kan Huang, Yangchuan Xing. A hybrid Liair battery with buckypaper air cathode and sulfuric acid electrolyte. Electrochimica Acta, 81, 20 (2012). https://doi.org/10.1016/j.electacta.2012.07.060
  155. Y. Shimonishi, T. Zhang, P. Johnson, N. Imanishi, A. Hirano, Y. Takeda, O. Yamamoto, N. Sammes. A study on lithium/air secondary batteries-Stability of NASICONtype glass ceramics in acid solutions. Journal of Power Sources, 195, 6187 (2010). https://doi.org/10.1016/j.jpowsour.2009.11.023
  156. Longjun Li, Xinsheng Zhao, Arumugam Manthiram. A dual-electrolyte rechargeable Li-air battery with phosphate buffer catholyte. Electrochemistry Communications, 14, 78 (2012). https://doi.org/10.1016/j.elecom.2011.11.007
  157. N.M. Markovic, P.N. Ross Jr. Surface science studies of model fuel cell electrocatalysts. Surface Science Reports, 45, 117 (2002). https://doi.org/10.1016/S0167-5729(01)00022-X
  158. Kyung Shik Yang, Guido Mul, Jacob A. Moulijn. Electrochemical generation of hydrogen peroxide using surface area-enhanced Ti-mesh electrodes. Electrochimica Acta, 52, 6304 (2007). https://doi.org/10.1016/j.electacta.2007.04.021
  159. Zhimin Qiang, Jih-Hsing Chang, Chin-Pao Huang. Electrochemical generation of hydrogen peroxide from dissolved oxygen in acidic solutions. Water Research, 36, 85 (2002). https://doi.org/10.1016/S0043-1354(01)00235-4
  160. Ping He, Yonggang Wang, Haoshen Zhou. The effect of alkalinity and temperature on the performance of lithiumair fuel cell with hybrid electrolytes. Journal of Power Sources, 196, 5611 (2011). https://doi.org/10.1016/j.jpowsour.2011.02.071
  161. V.S. Bagotzky, E.I. Khrushcheva, M.R. Tarasevich, N.A. Shumilova. Corrosion of platinum catalysts in alkaline solutions. Journal of Power Sources, 8, 301 (1982). https://doi.org/10.1016/0378-7753(82)80063-3
  162. Y. Kiros, O. Lindstrom, T. Kaimakis. Cobalt and cobaltbased macrocycle blacks as oxygen-reduction catalysts in alkaline fuel cells. Journal of Power Sources, 45, 219(1993). https://doi.org/10.1016/0378-7753(93)87011-Q
  163. Satoshi Hasegawa, Nobuyuki Imanishi, Tao Zhang, Jian Xie, Atsushi Hirano, Yasuo Takeda, Osamu Yamamoto. Study on lithium/air secondary batteries - Stability of NASICON-type lithium ion conducting glass - ceramics with water. Journal of power sources, 189, 371 (2009). https://doi.org/10.1016/j.jpowsour.2008.08.009
  164. Tao Zhang, Nobuyuki Imanishi, Satoshi Hasegawa, Atsushi Hirano, Jian Xie, Yasuo Takeda, Osamu Yamamoto, and Nigel Sammes. Li/Polymer Electrolyte/ Water Stable Lithium-Conducting Glass Cermaics Composite for Lithium-Air Secondary Batteries with an Aqueous Electrolyte. Journal of The Electrochemical Society, 155, A962 (2008).
  165. Jake Christensen, Paul Albertus, Roel S. Sanchez- Carrera, Timm Lohmann, Boris Kozinsky, Ralf Liedtke, Jasim Ahmed, and Aleksandar Kojic. A Critical Reivew of Li/Air Batteries. Journal of The Electrochemical Society, 159, R1 (2012). https://doi.org/10.1149/2.086202jes
  166. Takashi Kuboki, Tetsuo Okuyama, Takahisa Ohsaki, Norio Takami. Lithium-air batteries using hydrophobic room temperature ionic liquid electrolyte, Journal of Power Sources, 146, 766 (2005). https://doi.org/10.1016/j.jpowsour.2005.03.082
  167. Xin-hui Yang, Ping He, Yong-yao Xia. Preparation of mesocellular carbon foam and its application for lithium/ oxygen battery. Electrochemistry Communications, 11, 1127 (2009). https://doi.org/10.1016/j.elecom.2009.03.029
  168. J. Read. Ether-Based Electrolytes for the Lithium/Oxygen Organic Electrolyte Battery. Journal of The Electrochemical Society, 153, A96 (2006). https://doi.org/10.1149/1.2131827
  169. Wu Xu, Jie Xiao, Jian Zhang, Deyu Wang, and Ji-Guang Zhang. Optimization of Nonaqueous Electrolytes for Primary Lithium/Air Batteries Operated in Ambient Environment. Journal of the Electrochemical Society, 156, A773 (2009). https://doi.org/10.1149/1.3168564
  170. Wu Xu, Jie Xiao, Deyu Wang, Jian Zhang, and Ji-Guang Zhang. Effects of Nonaqueous Electrolytes on the Performance of Lithium/Air Batteries. Journal of the Electrochemical Society, 157, A219 (2010). https://doi.org/10.1149/1.3269928
  171. S.D. Beattie, D.M. Manolescu, and S.L. Blair. High- Capacity Lithium-Air Cathodes. Journal of the Electrochemical Society, 156, A44 (2009). https://doi.org/10.1149/1.3005989
  172. Supported Metals in Catalysis. Edited by James A. Adnerson and Marcos Fernandez Garcia. Imperial College Press, London, pp. 83-122, (2005).
  173. L. Trahey, C. S. Johnson, J. T. Vaughey, S.-H. Kang, L. J. Hardwick, S. A. Freunberger, P. G. Bruce, and M. M. Thackeray. Activated Lithium-Metal-Oxides as Catalytic Electrodes for Li-$O_{2}$ Cells. Electrochemical and Solid- State Letters, 14, A64 (2010).
  174. Linden's Handbook of Batteries, Fourth Edition. Thomas B. Reddy (Editor) and David Linden (Editor Emeritus), McGraw-Hill, pp. 33.1-33.58 (2011).
  175. Hirokazu Ohkuma, Ichiro Uechi, Nobuyuki Imanish, Atsushi Hiraro, Yasuo Takeda, Osamu Yamamoto. Carbon electrode with perovskite-oxide catalyst for aqueous electrolyte lithium-air secondary batteries. Journal of Power Sources, 223, 319 (2013). https://doi.org/10.1016/j.jpowsour.2012.09.028
  176. Xianyou Wang, P.J. Sebastian, Mascha A. Smit, Hongping Yang, S.A. Gamboa. Studies on the oxygen reduction catalysts for zinc-air battery electrode. Journal of Power Sources, 124, 278 (2003). https://doi.org/10.1016/S0378-7753(03)00737-7
  177. Neng Li, Xiaoming Yan, Wanjing Zhang, Bingxiong Lin. Electrocatalytic activity of spinel-type oxides $LiMn_{2-x}CoxO_{4}$ with large specific surface areas for metal-air battery. Journal of Power Sources, 74, 255 (1998). https://doi.org/10.1016/S0378-7753(98)00062-7

Cited by

  1. Review on mechanisms and continuum models of multi-phase transport phenomena in porous structures of non-aqueous Li-Air batteries vol.278, 2015, https://doi.org/10.1016/j.jpowsour.2014.12.078
  2. From Lithium-Oxygen to Lithium-Air Batteries: Challenges and Opportunities vol.6, pp.9, 2016, https://doi.org/10.1002/aenm.201502164
  3. Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions vol.117, pp.17, 2017, https://doi.org/10.1021/acs.chemrev.6b00417