References
- Ali, M. A. and White, R. N. (2001). "Automatic generation of truss model for optimal design of reinforced concrete structures." ACI Structural Journal, Vol. 98, No. 4, pp. 431-442.
- Alshegeir, A. (1992). Analysis and design of disturbed regions with strut-tie models, Ph.D. Dissertation, School of Civil Engineering, Purdue University, West Lafayette, Indiana, USA.
- American Association of State Highway and Transportation Officials (2010). AASHTO LRFD bridge design specifications, 5th Edition, Washington D.C., USA.
- American Concrete Institute (2011). Building code requirements for structural concrete (ACI 318M-11) and commentary, Farmington Hills, Michigan, USA.
- American Concrete Institute (2002). Examples for the design for structural concrete with strut-and-tie models; SP-208, Reineck R. H. Eds, ACI Subcommittee 445-1, Farmington Hills, Michigan, USA.
- Bakir, P. G. and Boduroglu, H. M. (2005). "Mechanical behaviour and non-linear analysis of short beams using softened truss and direct strut & tie models." Engineering Structures, Vol. 27, No. 4, pp. 639-651. https://doi.org/10.1016/j.engstruct.2004.12.003
- Bergmeister, K., Breen, J. E., Jirsa, J. O. and Kreger, M. E. (1993). Detailing in structural concrete, Research Report 1127-3F, University of Texas at Austin, Texas, USA.
- Canadian Standards Association (2004). Design of concrete structures for buildings, A23.3-M04, Rexdale, Ontario, Canada.
- Comite Euro-International du Beton (2010). CEP-FIP model code 2010, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
- Foster, S. J. and Gilbert, R. I. (1998). "Experimental studies on highstrength concrete deep beams." ACI Structural Journal, Vol. 95, No. 4, pp. 382-390.
- Ha, T. H. and Hong, S. G. (2005). "Effect of diagonal cracking on the strength of concrete strut in RC members." Proceedings of the Korean Concrete Institute, Vol. 17, No. 1, pp. 383-386 (in Korean).
- Hong, S. G. (2000). "Strut-and-tie models and failure mechanisms for bar development in tension-tension-compression nodal zone." ACI Structural Journal, Vol. 97, No. 1, pp. 111-121.
- Hwang, S. J., Lu, W. Y. and Lee, H. J. (2000). "Shear strength prediction for deep beams." ACI Structural Journal, Vol. 97, No. 3, pp. 367-376.
- Kim, B. H. and Yun, Y. M. (2011). "An indeterminate strut-tie model and load distribution ratio for RC deep beams - (I) Model & Load Distribution Ratio." Advances in Structural Engineering, Vol. 14, No. 6, pp. 1031-1042. https://doi.org/10.1260/1369-4332.14.6.1031
- Korean Concrete Institute (2012). Design specifications for structural concrete, Kimoondang, Seoul, Korea (in Korean).
- Kwak, H. G. and Noh, S. H. (2006). "Determination of strut-and-tie models using evolutionary structural optimization." Engineering Structures, Vol. 28, No. 10, pp. 1440-1449. https://doi.org/10.1016/j.engstruct.2006.01.013
- Lee, W. S. (2007). Strut-tie model approach using evolutionary structural optimization for reinforced concrete structural members, Ph.D. Dissertation, Kyungpook National University, Daegu, Korea, p. 210 (in Korean).
- Leu, L. J., Huang, H. W., Chen, C. S. and Liao, Y. P. (2006). "Strut-and-tie design methodology for three-dimensional reinforced concrete structures." Journal of Structural Engineering, Vol. 132, No. 6, pp. 929-938. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:6(929)
- Liang, Q. Q., Xie, Y. M. and Steven, G. P. (2001). "Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization." ACI Structural Journal, Vol. 98, No. 2, pp. 226-232.
- Liang, Q. Q., Uy, B. and Steven, G. P. (2002). "Performance-based optimization for strut-and-tie modeling of structural concrete." Journal of Structural Engineering, Vol. 128, No. 6, pp. 815-823. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:6(815)
- Park, H. G., Kim, Y. G. and Eom, T. S. (2005). "Direct inelastic strut-tie model using secant stiffness." Journal of the Korean Concrete Institute, Vol. 17, No. 2, pp. 201-212 (in Korean). https://doi.org/10.4334/JKCI.2005.17.2.201
- MacGregor, J. G. (1997). Reinforced concrete - Mechanics and Design, 3rd Edition, Prentice Hall, Englewood Cliffs, New Jersey, USA.
- MacGregor J. G. and Wight J. K. (2005). Reinforced concrete: Mechanics and Design, 4th Edition, Pearson Prentice Hall, Upper Saddle River, NJ, USA.
- Tjhin, T. N. and Kuchma, D. A. (2002). "Computer-based tools for design by strut-and-tie method: Advances and Challenges." ACI Structural Journal, Vol. 99, No. 5, pp. 586-594.
- Yun, Y. M. (2000). "Nonlinear strut-tie model approach for structural concrete." ACI Structural Journal, Vol. 97, No. 4, pp. 581-590.
- Yun, Y. M. (2005). "Effective strength of concrete strut in strut-tie model (I): Methods for Determining Effective Strength of Concrete Strut." Journal of the Korean Society of Civil Engineers, Vol. 25, No. 1A, pp. 49-59 (in Korean).
- Yun, Y. M. (2006). "Strength of two-dimensional nodal zones in Strut-Tie models." Journal of Structural Engineering, ASCE, Vol. 132, No. 11, pp. 1764-1783. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:11(1764)
- Yun Y. M. and Kim B. H. (2008). "A 2-Dimensional grid strut-tie model approach for structural concrete." Journal of Structural Engineering, ASCE, Vol. 134, No. 7, pp. 1199-1214. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:7(1199)
- Yun, Y. M. and Ramirez, J. A. (1996). "Strength of struts and nodes in strut-tie model." Journal of Structural Engineering, ASCE, Vol. 122, No. 1, pp. 20-29. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(20)
- Willam, K. J. and Warnke, E. P. (1974). "Constitutive model for the triaxial behavior of concrete." Proc., International Association of Bridge Structures, Vol. 19, pp. 1-30.