Steel and Composite Structures

  • 제16권3호
  • /
  • Pages.269-288
  • /
  • 2014
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An experimental study on the ballistic performance of FRP-steel plates completely penetrated by a hemispherical-nosed projectile

  • Chen, Changhai (Department of Naval Architecture Engineering, Naval University of Engineering) ;
  • Zhu, Xi (Department of Naval Architecture Engineering, Naval University of Engineering) ;
  • Hou, Hailiang (Department of Naval Architecture Engineering, Naval University of Engineering) ;
  • Zhang, Lijun (Department of Naval Architecture Engineering, Naval University of Engineering) ;
  • Shen, Xiaole (Lvshun Proving Ground) ;
  • Tang, Ting (Department of Naval Architecture Engineering, Naval University of Engineering)
  • 투고 : 2012.11.18
  • 심사 : 2013.10.30
  • 발행 : 2014.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Experiments were carried out to investigate the ballistic performance of fiber reinforced plastic(FRP)-steel plates completely penetrated by hemispherical-nosed projectiles at sub-ordnance velocities greater than their ballistic limits. The FRP-steel plate consists of a front FRP laminate and a steel backing plate. Failure mechanisms and impact energy absorptions of FRP-steel plates were analyzed and compared with FRP laminates and single steel plates. The effects of relative thickness, manufacturing method and fabric type of front composite armors as well as the joining style between front composite armors and steel backing plates on the total perforation resistance of FRP-steel plates were explored. It is found that in the case of FRP-steel plates completely penetrated by hemispherical-nosed projectiles at low velocities, the failure modes of front composite armors are slightly changed while for steel backing plates, the dominate failure modes are greatly changed due to the influence of front composite armors. The relative thickness and fabric type of front composite armors as well as the joining style of FRP-steel plates have large effects whereas the manufacturing method of front composite armors has slight effect on the total perforation resistance of FRP-steel plates.

키워드

참고문헌

  1. Almohandes, A.A., Abdel-Kader, M.S. and Eleiche, A.M. (1996), "Experimental investigation of the ballistic resistance of steel-fiberglass reinforced polyester laminated plates", Compos. Part B: Eng., 27(5), 447-458.
  2. Backman, M.E. and Goldsmith, W. (1978), "The mechanics of penetration of projectiles into targets", Int. J. Eng. Sci., 16(1), 1-99. https://doi.org/10.1016/0020-7225(78)90002-2
  3. Ben-Dor, G., Dubinsky, A. and Elperin, T. (1998a), "On the ballistic resistance of multi-layered targets with air gaps", Int. J. Solids Struct., 35(23), 3097-3103. https://doi.org/10.1016/S0020-7683(97)00358-2
  4. Ben-Dor, G., Dubinsky, A. and Elperin, T. (1998b), "Effect of air gaps on ballistic resistance of targets for conical impactors", Theoret. Appl. Fract. Mech., 30(3), 243-249. https://doi.org/10.1016/S0167-8442(98)00059-7
  5. Ben-Dor, G., Dubinsky, A. and Elperin, T. (2006), "Effect of air gaps on the ballistic resistance of ductile shields perforated by non-conical impactors", J. Mech. Mater. Struct., 1(2), 279-299. https://doi.org/10.2140/jomms.2006.1.279
  6. Chen, C.H., Zhu, X., Hou, H.L. and Wang, T.Q. (2011), "Experimental study on composite armor structure of warship topside against kinetic armor-piercing", Explosion and Shock Waves, 31(1), 11-18. [In Chinese]
  7. Corbett, G.G., Reid, S.R. and Johnson, W. (1996), "Impact loading of plates and shells by free-flying projectiles-a review", Int. J. Impact Eng., 18(2), 141-230. https://doi.org/10.1016/0734-743X(95)00023-4
  8. Corran, R.S.J., Shadbolt, P.J. and Ruiz, C. (1983), "Impact loading of plates-an experimental investigation", Int. J. Impact Eng., 1(1), 3-22. https://doi.org/10.1016/0734-743X(83)90010-6
  9. Dean, J., Dunleavy, C.S., Brown, P.M. and Clyne, T.W. (2009), "Energy absorption during projectile perforation of thin steel plates and the kinetic energy of ejected fragments", Int. J. Impact Eng., 36(10-11), 1250-1258. https://doi.org/10.1016/j.ijimpeng.2009.05.002
  10. Dey, S., Borvik, T., Teng, X., Wierzbicki, T. and Hopperstad, O.S. (2007), "On the ballistic resistance of double-layered steel plates-an experimental and numerical investigation", Int. J. Solids Struct., 44(20), 6701-6723. https://doi.org/10.1016/j.ijsolstr.2007.03.005
  11. Elek, P., Jaramaz, S. and Mickovic, D. (2005), "Modeling of perforation of plates and multi-layered metallic targets", Int. J. Solids Struct., 42(3-4), 1209-1224. https://doi.org/10.1016/j.ijsolstr.2004.06.053
  12. Gupta, N.K. and Madhu, V. (1997), "An experimental study of normal and oblique impact of hard-core projectile on single and layered plates", Int. J. Impact Eng., 19(5-6), 395-414. https://doi.org/10.1016/S0734-743X(97)00001-8
  13. Gupta, N.K., Iqbal, M.A. and Sekhon, G.S. (2008), "Effect of projectile nose shape, impact velocity and target thickness on the deformation behavior of layered plates", Int. J. Impact Eng., 35(1), 37-60. https://doi.org/10.1016/j.ijimpeng.2006.11.004
  14. Kreyenhagen, K.N., Wagner, M.H., Piechocki, J.J. and Wagner, M.H. (1970), "Ballistic limit determination in impacts on multimaterial laminated targets", AIAA J., 18(12), 2147-2151.
  15. Liang, C.C., Yang, M.F., Wu, P.W. and Teng, T.L. (2005), "Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application", Ocean Eng., 32(3-4), 441-468. https://doi.org/10.1016/j.oceaneng.2004.05.009
  16. Lim, C.T., Tan, V.B.C. and Cheong, C.H. (2002), "Perforation of high-strength double-ply fabric system by varying shaped projectiles", Int. J. Impact Eng., 27(6), 577-591. https://doi.org/10.1016/S0734-743X(02)00004-0
  17. Marom, I. and Bodner, S.R. (1979), "Projectile perforation of multi-layered beams", Int. J. Mech. Sci., 21(8), 489-504. https://doi.org/10.1016/0020-7403(79)90011-0
  18. Nia, A.A. and Hoseini, G.R. (2011), "Experimental study of perforation of multi-layered targets by hemispherical-nosed projectiles", Mater. Des., 32(2), 1057-1065. https://doi.org/10.1016/j.matdes.2010.07.001
  19. Nurick, G.N. and Walters, C.E. (1990), "The ballistic penetration of multiple thin plates separated by an air gap", Proceedings of SEM Conference on Experimental Mechanics, pp. 631-637.
  20. Radin, J. and Goldsmith, W. (1988), "Normal projectile penetration and perforation of layered targets", Int. J. Impact Eng., 7(2), 229-259. https://doi.org/10.1016/0734-743X(88)90028-0
  21. Teng, X., Dey, S., Borvik, T. and Wierzbicki, T. (2007), "Protection performance of double layered metal shields against projectile impact", J. Mech. Mater. Solids, 2(7), 1307-1328.
  22. Teng, X., Wierzbicki, T. and Huang, M. (2008), "Ballistic resistance of double-layered armor plates", Int. J. Impact Eng., 35(8), 870-884. https://doi.org/10.1016/j.ijimpeng.2008.01.008
  23. Woodward, R.L. and Cimpoeru, S.J. (1998), "A study of the perforation of aluminium laminate targets", Int. J. Impact Eng., 21(3), 117-131. https://doi.org/10.1016/S0734-743X(97)00034-1
  24. Zhu, X., Hou, H.L., Gu, M.B., Mei, Z.Y. and Chen, X. (2006), "Experimental study on armor protection against ballistic impact of small caliber artillery", Explosion and Shock Waves, 26(3), 262-268. [In Chinese]
  25. Zhu, X., Mei, Z.Y. and Liu, R.Q. (2003), "Warship's light composite armor structure resistibility for ballistic impact", Explosion and Shock Waves, 23(1), 61-66. [In Chinese]
  26. Zukas, J.A. and Scheffler, D.R. (2001), "Impact effects in multilayered plates", Int. J. Solids Struct., 38(19), 3321-3328. https://doi.org/10.1016/S0020-7683(00)00260-2

피인용 문헌

  1. Elastomer-metal laminate armor vol.111, 2016, https://doi.org/10.1016/j.matdes.2016.08.072
  2. Buckling behaviours of functionally graded polymeric thin-walled hemispherical shells vol.21, pp.4, 2016, https://doi.org/10.12989/scs.2016.21.4.849
  3. Analytical and Experimental Investigation of Ballistic Impact on Thin Laminated Composite Plate vol.10, pp.02, 2018, https://doi.org/10.1142/S1758825118500205
  4. Mechanical behavior of FRP confined steel tubular columns under impact vol.27, pp.6, 2014, https://doi.org/10.12989/scs.2018.27.6.691