DOI QR코드

DOI QR Code

Synchronized Control of Active Harmonic Gear System

능동 하모닉 기어구동시스템의 동기화제어

  • Kim, Sang-Jin (Department of Control & Mechanical Engineering, the Graduate School, Pukyong National University and Samsung TALES) ;
  • Moon, Deok-Hong (Department of Mechanical System Engineering, Pukyong National University) ;
  • Kim, Young-Bok (Department of Mechanical System Engineering, Pukyong National University)
  • 김상진 (부경대학교 대학원 제어기계공학과, 삼성탈레스) ;
  • 문덕홍 (부경대학교 기계시스템공학과) ;
  • 김영복 (부경대학교 기계시스템공학과)
  • Received : 2014.01.02
  • Accepted : 2014.01.14
  • Published : 2014.02.28

Abstract

In this paper, the authors consider a gimbal system in which a camera is installed to reconnoiter the objects or targets. The issue for this considered system is to obtain information with good quality always. To achieve given objective, it is necessary to control the gimbal system with accurate rotation angle and speed. In this paper, the authors design a robust control system based on $H_{\infty}$ control framework. The controller is designed using a plant model obtained by experiment and simulation. And the experiment result with good control performance is presented.

Keywords

References

  1. C. H. Kang, B. S. Lee, H. C. Kang and M. H. Kang, 2012, "Current Status of EOTS for Fighter and Its Technical Trends", Proceedings of KSAS Conference, pp. 693-698.
  2. J. B. Lim, S. S. Kim and J. Yu, 2013, "Maneuverability Improvement of EOTS by Driving the Outer Gimbal First", Journal of Control, Robotics and Systems, Vol. 19, No. 10, pp. 873-878. https://doi.org/10.5302/J.ICROS.2013.13.1914
  3. J. H. Back, T. S. Yang, S. H. Kim and Y. K. Kwak, 2002, "A Study on the Bandwidth of Gear Reduction Servo System according to Backlash and Motor Supplied Voltage", Journal of the Korean Society for Precision Engineering, Vol. 19, No. 6, pp. 119-127.
  4. M. J. Kim, D. W. Shin, K. Y. Kim and J. S. Kim, 2002, "Designs of Line-of-Sight Stabilization Control Systems Using Disturbance Observer and Sliding Mode Observer", Proceedings of KSME Annual Conference, pp. 126-131.
  5. W. K. Ahn and W. Y. Hur, 2006, "Disturbance Observer Design for Backlash Compensation of Robot Joint", pp. 187-189.
  6. C. I. Park, 2010, "Nonlinear Dynamic Analysis of Helical Gears with Backlash by Torque Fluctuation", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 7, pp. 677-684. https://doi.org/10.5050/KSNVE.2010.20.7.677
  7. Y. S. Choi, B. H. Lee and Y. H. Sin, 1997, "Nonlinear Dynamic Analysis of Gear Driving System due to Transmission Error and Backlash", Transactions of the Korean Society of the Automative Engineers, Vol. 5, No. 1, pp. 69-78.
  8. Charles E Wilson, translated by M. S. Park, 1996 "Theory of Mechanics", Huijungdang.
  9. K. Nonami, H. Nishimura and M. Hirata, 1998, "Control System Design using Matlab", Tokyo Denki University, pp. 115-118.

Cited by

  1. Robot Arm Motion Control System Design based on Double Active Disturbance Rejection Method vol.23, pp.3, 2014, https://doi.org/10.9726/kspse.2019.23.3.065