References
- Grassi, D., Brizzolara, S., Viviani, M., Savio, L., and Caviglia, S., 2010, "Design and Analysis of Counter-rotating Propellers- Comparison of Numerical and Experimental Results,"Journal of Hydrodynamics, 22(5), pp. 570-576. https://doi.org/10.1016/S1001-6058(09)60254-7
- Xu, J., Tan, C., Chen, H., Zhu, Y., and Zhang, D., 2009, "Influence of Tip Clearance on Performance of a Contra-Rotating Fan," Journal of Thermal Science, 18(3), pp.207-214. https://doi.org/10.1007/s11630-009-0207-1
- Li, Q., Piechna, J., and Muller, N., 2011, "Design of a Novel Axial Impeller as a Part of Counter-Rotating Axial Compressor to Compress Water Vapor as Refrigerant," Applied Energy, 88(9), pp. 3156-3168. https://doi.org/10.1016/j.apenergy.2011.02.024
- Furukawa, A., Cao, Y., Okuma, K., and Watanabe, S., 2000, "Experimental Study of Pump Characteristics of Contra-Rotating Axial Flow Pump," Proc. 2nd International Symposium on Fluid Machinery and Fluid Engineering, Beijing, China, pp. 245-252.
- Furukawa, A., Shigemitsu, T., and Watanabe, S., 2007, "Performance Test and Flow Measurement on Contra-rotating Axial Flow Pump," Journal of Thermal Science, Vol 16, pp. 7-13. https://doi.org/10.1007/s11630-007-0007-4
- Momosaki, S., Usami, S., Okuma, K., Watanabe, S., and Furukawa, A., 2010, "Experimental Study on Rotational Speed Control of Contra-Rotating Axial Flow Pump," Proc. of 3rd Asian Joint Workshop on Thermophysics and Fluid Science, Matsue, Japan, paper No. JP-02.
- Shigemitsu, T., Takano, T., Furukawa, A., Okuma, K., and Watanabe, S., 2005, "Pressure Measurement on Casing Wall and Blade Rows Interaction of Contra-rotating Axial Flow Pump," Journal of Thermal Science, Vol. 14, pp. 142-149. https://doi.org/10.1007/s11630-005-0025-z
- Momosaki, S., Usami, S., Watanabe, S., Furukawa, A., 2010, "Numerical Simulation of Internal Flow in a Contra-Rotating Axial Flow Pump," Proceedings of 25th IAHR Symposium on Hydraulic Machinery and Systems, 2010 IOP Conf. Ser.: Earth Environ. Sci., 12, 012046.
- Cao, L., Watanabe, S., Momosaki, S., Imanishi, T., and Furukawa, A., 2013, "Low Speed Design of Rear Rotor in Contra-Rotating Axial Flow Pump," International Journal of Fluid Machinery and Systems, Vol. 6, pp. 105-112. https://doi.org/10.5293/IJFMS.2013.6.2.105
- Kameier, F., and Neise, W., 1997, "Rotating Blade Flow Instability as a Source of Noise in Axial Turbomachines," Journal of Sound and Vibration, 203(5), pp. 833-853. https://doi.org/10.1006/jsvi.1997.0902
- Yamamoto, A., Matsunuma, T., Ikeuchi, K., and Outa, E., 1994, "Unsteady Endwall/Tip-Clearance Flows and Losses due to Turbine Rotor-Stator Interaction," ASME Paper No. 94-GT-461.
- Ottavy, X., Trebinjac, I., Vouillarmet, A., and Arnaud, D., 2003, "Laser Measurements in High Speed Compressors for Rotor-Stator Interaction Analysis," Journal of Thermal Science, 12(4), pp. 310-317. https://doi.org/10.1007/s11630-003-0036-6
- Estevadeordal, J., Gogineni, S., Copenhaver, W., Bloch, G., and Brendel, M., 2000, "Flow Field in a Low-Speed Axial Fan: a DPIV Investigation," Experimental Thermal and Fluid science, 23(1), pp.11-21. https://doi.org/10.1016/S0894-1777(00)00027-3
- Giles, M. B., and Drela, M., 1987, "Two-Dimensional Transonic Aerodynamic Design Method," AIAA journal, 25(9), pp. 1199-1206. https://doi.org/10.2514/3.9768
- Zangeneh, M., Goto, A., and Harada, H., 1998, "On the Design Criteria for Suppression of Secondary Flows in Centrifugal and Mixed Flow Impellers," Journal of Turbomachinery, 120(4), pp. 723-735. https://doi.org/10.1115/1.2841783
- Cao, L., Watanabe, S., Imanishi, T., Yoshimura, H., & Furukawa, A., 2013, "Experimental Analysis of Flow Structure in Contra-Rotating Axial Flow Pump Designed with Different Rotational Speed Concept," Journal of Thermal Science, 22(4), pp.345-351. https://doi.org/10.1007/s11630-013-0634-x
- Brennen, C. E., 1994, Hydrodynamics of Pumps, Concepts NREC and Oxford University Press, pp. 70-77.
- Cao, L., Watanabe, S., Imanishi, T., Yoshimura, H., Furukawa, A., 2013, "Blade Rows Interaction in Contra-Rotating Axial Flow Pump Designed with Different Rotational Speed Concept," Proceedings of the 6th International Conference on Pumps and Fans with Compressors and Wind Turbines, 2013 IOP Conf. Ser.: Mater. Sci. Eng., 52, 022004.
- Tallman, J., Lakshminarayana, B., 2001, "Numerical Simulation of Tip Leakage Flows in Axial Flow Turbines, with Emphasis on Flow Physics: Part I - Effect of Tip Clearance Height", Journal of Turbomachinery, 123(2), pp. 314-323. https://doi.org/10.1115/1.1368881
- Xiao, X., McCarter, A. A., Lakshminarayana, B., 2001, "Tip Clearance Effects in ATurbine Rotor: Part I - Pressure Field and Loss", Journal of Turbomachinery, 123(2), pp. 296-304. https://doi.org/10.1115/1.1368365
- Shur, M., Spalart, P. R., Strelets, M., Travin, A., 1999, "Detached-eddy Simulation of An Airfoil at High Angle of Attack", Engineering Turbulence Modeling and Experiments, 4, pp. 669-678.
- Jang, C. S., Ross, J. C.,Cummings, R. M., 1998, "Numerical Investigation of An Airfoil with A Gurney Flap", Aircraft Design, 1(2), pp. 75-88. https://doi.org/10.1016/S1369-8869(98)00010-X