References
- Fujishiro, H., Okamoto, T., and Hirose, K., 2001, Thermal Contact Resistance between High-TC Superconductor and Copper, Physica C, Vol. 357-360, pp. 785-788. https://doi.org/10.1016/S0921-4534(01)00364-1
- Fieberg, C. and Kneer, R., 2008, Determination of thermal contact resistance form transient temperature measurements, International Journal of Heat and Mass Transfer, Vol. 51, pp. 1017-1023. https://doi.org/10.1016/j.ijheatmasstransfer.2007.05.004
- Bi, D., Chen, H., and Tian, Y., 2012, Influences of temperature and contact pressure on thermal contact resistance at interfaces at cryogenic temperatures, Cryogenics, Vol. 52, pp. 403-409. https://doi.org/10.1016/j.cryogenics.2012.03.006
- Baba, T. and Ono, A., 2001, Improvement of laser flash method to reduce uncertainly in thermal diffusivity measurements, Measurement Science and Technology, Vol. 12, pp. 2046-2057. https://doi.org/10.1088/0957-0233/12/12/304
- Yu, J., Yee, A. L., and Schwall, R. E., 1992, Thermal conductance of Cu/Cu and Cu/Si interfaces from 85 K to 300 K, Cryogenics, Vol. 32, pp. 610-615. https://doi.org/10.1016/0011-2275(92)90291-H
- Xu, R., Feng, H., Zhao, L., and Xu, L., 2006, Experimental investigation of thermal contact conductance at low temperature based on fractal description, International Communications in Heat and Transfer, Vol. 33, pp. 811-818. https://doi.org/10.1016/j.icheatmasstransfer.2006.02.023
- Yeh, C. L., Wen, C. Y., Chens, Y. F., Yeh, S. H., and Wu, C. H., 2001, An experimental investigation of thermal contact conductance across bolted joint, Experimental Thermal and Fluid Science, Vol. 25, pp. 349-357. https://doi.org/10.1016/S0894-1777(01)00096-6
- Rosochowska, M., Balendra, R., and Chodnikiewicz, K., 2003, Measurements of thermal contact conductance, Journal of Materials Processing Technology, Vol. 135, pp. 204-210. https://doi.org/10.1016/S0924-0136(02)00897-X
- Sarte, V. and Lallenmand, M., 2001, Enhancement of thermal contact conductance for electronic systems, Applied Thermal Engineering, Vol. 21, pp. 221-225. https://doi.org/10.1016/S1359-4311(00)00034-X
- Juvinall, R. C., 1991, Fundamentals of Machine Component Design, John Wiley and Sons, INC., New York, USA.
- Gmelin, E., Asen-Palmer, M., Reuther, M., and Villar, R., 1999, Thermal boundary resistance of mechanical contacts between solids at sub-ambient temperature, J Phys D : Appl. Phys, Vol. 32, pp. 19-43. https://doi.org/10.1088/0022-3727/32/6/004
- Incropera, F. P. and Dewitt, D. P., 1996, Fundamentals of Heat and transfer, John Wiley and Sons, INC., New York, USA.
Cited by
- Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014 vol.27, pp.7, 2015, https://doi.org/10.6110/KJACR.2015.27.7.380