Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Operating Characteristics of LED Package Heat-sink with Multi-Pin's

멀티-핀을 갖는 LED 패키지 방열장치의 동작특성

  • Choi, Hoon (Department of Advanced Engineering, Kyungnam University) ;
  • Han, Sang-Bo (Dept. of Electrical Engineering, Kyungnam University) ;
  • Park, Jae-Youn (Dept. of Electrical Engineering, Kyungnam University)
  • 최훈 (경남대학교 첨단공학과) ;
  • 한상보 (경남대학교 전기공학과) ;
  • 박재윤 (경남대학교 전기공학과)
  • Received : 2013.08.19
  • Accepted : 2014.06.10
  • Published : 2014.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is proposed to design the new heat-sink apparatus for improving the heat transfer characteristics in the power LED chip, and results of the operation characteristics were discussed. The core design is that the soldering through-hole on the FR-4 PCB board is formed to the effective heat transfer. That is directly filled with Ag-nano materials, which shows the high thermal conductivity. The heat transfer medium consisting of Ag-nano materials is classified into two structures. Mediums are called as the heat slug and the multi-pin in this work. The heat of the high temperature generated from the LED chip was directly transferred to the heat slug of the one large size. And the accumulated heat from the heat slug was quickly dissipated by the medium of the multi-pin, which is the same body with the heat slug. This multi-pin was designed for the multi-dissipation of heat by increasing the surface areas with a little pins. Subsequently, the speed of the heat transfer with this new heat-sink apparatus is three times faster than the conventional heat-sink. Therefore, the efficiency of the illuminating light will be improved by adapting this new heat-sink apparatus in the large area's LED.

Keywords

References

  1. Korean Patent Gazette(B1), Registration number 10-0975970(09/08/2010), "The large illuminations with power LED", Korean Patent Gazette(B1), Registration number 10-1023255(10/03/2011), Power LED Radiator Using Implant Type.
  2. TaeHo Ji, "LED heat dissipation technology analysis", GTNET Technology Trends Report No. 2011-3 19, Korea Institute of Science and Technology Information.
  3. MyeongGeun, Hwang, YoungBae Seo, YoungGil Kim, WonBae Seo, GyuHyeong Kim, Co-author, "LED thermal design and measurement techniques", pp87, pp132-pp138, 2011.
  4. MyeongGeun. Hwang, YeonMin. Joh, JaeYeop No Co-author, "LED package and heat dissipation", pp39, 2010.
  5. YUNUS A. CENGEL, "Introduction to Thermodynamics and Heat Transfer", McGraw-Hill, Seven other airspace OhBung Gwon, Inter Vision Publishing, 2003.
  6. United States Patent, US 7,582,913 B2, "Lens and LED using lens to achieve homogeneous illumination", Sep. 1, 2009.
  7. China Patent Gazette(C0), Registration number CN 100495113G(03/06/2009), Design method of threedimensional optical lens and lens.
  8. JinSung Park, ChangSu Huh, SaeByul Kang, YounSik Lee, "A study on thermal distribution characteristics of lighting fixtures depending on LED Chip Array", Korea Institute of Lighting Electrical Installation Engineers Proceedings 2011 (23/11/2011).