Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Development of an Anti-Freezing Heating Cable Temperature Controller and Its Power Saving Effects Analysis

동파방지 발열선용 온도제어기 개발 및 전기에너지 절감 효과 분석

  • Received : 2014.09.04
  • Accepted : 2014.09.23
  • Published : 2014.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Although anti-freezing heating cable has been widely installed in most residential boiler pipe, there were excessive energy consumption and fire risk due to inadequate temperature control. In this paper, a new energy saving fire risk-free controller was developed by using microprocessing operation which include detection of not only boiler room temperature but also pipe surface one. Its actual effect has been verified to save more than a half of the energy consumption comparing to conventional controller through temperature and humidity chamber experiment.

Keywords

References

  1. Heat trace, Handbook of Industrial Electric Heat Tracing, pp12-13,Heat trace Limited, 2014.
  2. Raychem XL-Trace System: Installation and Operation Manual for Pipe Freeze Protection and Flow Maintenance. Pentair. March 2013. Retrieved 3 August 2014.
  3. James Bilbro et al, Electric trace heating -state of the art, Paper 69 TP 20-IGA,IEEE TRANSACTIONS ON INDUSTRY AND GENERAL APPLICATIONS, JULY/AUGUST pp 476-480, 1969.
  4. Erickson, C. James, "Jim, For developments in the use of electrical heating in the pipeline industry.. Heating of Pipelines with Self-Regulating Heating Cables, 1972.
  5. Ted Hammack and Stephen Kucklinca, Self-Limiting Electrical Heat Tracing:New Solution to Old Problems , IEEE Transactions on Industry Applications March/April, 1977.
  6. Derek Brooks et al, Reducing the total Cost of Ownership of Electric Heat Tracing Systems in Northern Alberta IEEE Paper No. PCIC-2000-16, 2000.
  7. James Bilbro et al, Electric trace heating -state of the art, Paper 69 TP 20-IGA,IEEE TRANSACTIONS ON INDUSTRY AND GENERAL APPLICATIONS, JULY/AUGUST pp 476-480, 1969.
  8. Paul R. Smith, ed. Facilities engineering and management handbook : commercial, industrial, and institutional buildings,McGraw Hill,2001 ISBN 0-07-059323-X chapter 5 pp 5-198 through 5-201.
  9. D. Bourgault, S. Pavard, R. Tournier, L. Porcar, N. Caillault, and L. Carbone, "Current limitation capability of bulk Bi2223 material," ser. Physica C (Netherlands), vol. 372-376. Netherlands: Elsevier, pp. 1598-1601. 2002.
  10. M. S. Colclough, J. S. Abell, G. E. Gough, J. Rickets, T. Shields, F. Wellhofer, W. F. Vinen, N. M. Alford, and T. Button, "Pulsed critical current measurements on BYBCO wires and screen-printed films,"Cryogenics, vol. 30, pp. 439-444, 1990. https://doi.org/10.1016/0011-2275(90)90173-A
  11. Chet Sandberg et al, Electrical Heat Tracing:International Harmonization Now and in the Future, IEEE Industry Standards Magazine, May/June pp 50-56, 2002.