Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

A comparative study on the TBM disc cutter wear prediction model

TBM 디스크 커터 마모 예측 모델 비교 연구

  • Received : 2014.10.10
  • Accepted : 2014.10.24
  • Published : 2014.11.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this study TBM disc cutter prediction models including Gehring, CSM and NTNU models were investigated and the characteristics of the models were examined. The influence of penetration, uniaxial compressive strength and abrasiveness index on the models was analyzed. The life of disc cutter linearly increases with penetration per revolution and decreases with increasing uniaxial compressive strength of rocks. As the abrasiveness index, CAI, increases, the life of disc cutter in Gehring and CSM model decreases. On the contrary, the life of disc cutter life in NTNU model decreases with increasing CLI. Also, comparisons of predicted disc life were made between models using actual job site data.

본 연구에서는 Gehring, CSM, NTNU 모델을 이용한 디스크 커터 수명 예측 방법과 각 모델이 가지는 특징을 살펴보았다. 디스크 커터 수명에 크게 영향을 주는 요소인 관입깊이, 암석의 일축압축강도, 마모지수의 변화가 각각의 예측 모델들에 미치는 영향을 분석하였다. 디스크 커터 수명은 1회전당 관입깊이에 선형적으로 증가하였고, 일축압축강도의 증가에 따라 감소하는 경향을 보였다. 마모지수인 CAI 값이 증가함에 따라 Gehring과 CSM 모델에서의 디스크 커터 수명은 감소하였으나, CLI 값이 증가할수록 NTNU 모델의 디스크 커터 수명은 증가하는 경향을 보였다. 그리고 실제 현장 자료를 이용하여 디스크 커터 수명을 상호 비교하였다.

Keywords

References

  1. ASTM D7625-10. (2010), "Standard test method for laboratory determination of abrasiveness of rock using the CERCHAR Method", ASTM International.
  2. Bieniawski, Z.T., Celada, B., Galera, J.M., Tardaguila, I. (2009), "Prediction of cutter wear using RME", Proceedings of ITA-AITES World Tunnel Congress 2009 & 35th ITA General Assembly, Budapest, Hungary.
  3. Bruland, A. (1998), "Hard rock tunnel boring- advance rate and cutter wear", Vol. 3, Doctoral Thesis at NTNU p. 81.
  4. Frenzel, C., Kasling, H., Thuro, K. (2008), "Factors influencing disc cutter wear", Geomechanik und Tunnelbau, Vol. 1, No. 1, pp. 55-60. https://doi.org/10.1002/geot.200800006
  5. Frenzel, C. (2011), "Disc cutter wear phenomenology and their implications on disc cutter consumption for TBM", Proceedings of 45th US Rock Mechanics/ Geomechanics Symposium, San Francisco, U.S.A.
  6. Gehring, K. (1995), "Leistungs-und verschleissprognosen im maschinellen tunnelbau", Felsbau, Vol. 13, No. 6, pp. 439-448.
  7. Hassanpour, J., Rostami, J., Tarigh Azali, S., Zhao, J. (2014), "Introduction of an empirical TBM cutter wear prediction model for pyroclastic and mafic igneous rocks; a case history of Karaj water conveyance tunnel, Iran", Tunnelling and Underground Space Technology, Vol. 43, pp. 222-231. https://doi.org/10.1016/j.tust.2014.05.007
  8. Leitner, W. (2004), "Baubetriebliche modellierung der prozesse maschineller tunnelvortriebe im festgestein: von der Penetration zur vortriebsgeschwindigkeit", p. 232.
  9. Maidl, B., Schmid, L., Ritz, R., Herrenknecht, M. (2008), "Hardrock tunnel boring machines", Ernst & Sohn, p. 356.
  10. Palmstrom, A. (1995), "RMi - a rock mass characterization system for rock engineering purposes", PhD thesis, Oslo University, Norway.
  11. Rostami, J., Ozdemir, L., Bruland, A., Daul, F. (2005), "Review of issues related to cerchar abrasivity testing and their implications on investigations and cutter cost estimates", Proceedings of the Rapid Excavation and Tunneling Conference (RETC), Seattle, U.S.A., pp. 738-751.
  12. Rostami, J., Ozdemir, L. (1993), "A new model for performance prediction of hard rock TBMs", Proceedings of the Rapid Excavation and Tunneling Conference (RETC), Boston, U.S.A., pp. 793-809.
  13. The Robbins Company (2005), "Service Manual-Model 1812-299-2", U.S.A.

Cited by

  1. Development of a prediction model for the wear evolution of disc cutters on rock TBM cutterhead vol.67, 2017, https://doi.org/10.1016/j.tust.2017.05.003
  2. Effect of geomechanical properties on Cerchar Abrasivity Index (CAI) and its application to TBM tunnelling vol.57, 2016, https://doi.org/10.1016/j.tust.2016.02.006