DOI QR코드

DOI QR Code

Information Delivery Manual for IFC-Based Structural Design of Composite Beams and Composite Columns Focused on Check for Limit States

한계상태 검토에 초점을 둔 합성보와 합성기둥의 IFC-기반 부재설계를 위한 IDM

  • Received : 2014.09.14
  • Accepted : 2014.12.09
  • Published : 2014.12.30

Abstract

The purpose of this study was to develop Information Delivery Manual (IDM) which defines when and which part of the data should be exchanged for structural design of composite beams and composite columns focused on check for limit states. To achieve this purpose, user requirements of information exchange were defined for the scope of data exchange and, within this scope, process map (PM) for composite beams and columns were defined. And, according to these PMs, context, material, geometry, required strength, provided strength, and serviceability were derived as exchange requirement (ER). Also, based on these ERs, unit, id, material_steel, material_concrete, geometry_H_section, geometry_concrete, deckplate, stud_bolt, rebar, load_combination, load, force, displacement, and capacity were derived as functional part (FP). Then, the entities and Psets in IFC4 were mapped to the corresponding FPs. In some cases, new Psets were created. Finally, the developed IDM was tested using a program based on Excel and VBA. The test results showed that the required data for structural design of composite beams and columns can be exchanged successfully according to the developed PMs, ERs, FPs in the IDM.

Keywords

References

  1. buildingSMART, Industry Foundation Classes (IFC) data model, http://www.buildingsmart.org/standards/ifc, 2014a
  2. buildingSMART, Information Delivery Manual (IDM), http://www.buildingsmart.org/standards/idm, 2014b
  3. Jeff Wix and Jan Karlshoj, Information Delivery Manual: Guide to Components and Development Methods, buildingSMART International, 2010
  4. buildingSMART, Information Delivery Manual Overview, http://iug.buildingsmart.org/idms/overview, 2014c
  5. C. M. Eastman, Y. S. Jeong, R. Sacks, and I. Kaner, Exchange Model and Exchange Object Concepts for Implementation of National BIM Standards, Journal of Computing in Civil Engineering, Vol. 24, No. 1, ASCE, p.p.24-34, 2010
  6. X. Liu, B. Akinci, M. Berges, and J. H. Garrett Jr., Extending the information delivery manual approach to identify information requirements for performance analysis of HVAC systems, Advanced Engineering Informatics, Vol. 27, Elsevier, p.p. 496-505, 2013 https://doi.org/10.1016/j.aei.2013.05.003
  7. G. Lee, Y. Park, S. Ham, Extended Process to Product Modeling (xPPM) for integrated and seamless IDM and MVD development, Advanced Engineering Informatics, Vol. 27, Elsevier, p.p. 636-651, 2013 https://doi.org/10.1016/j.aei.2013.08.004
  8. Object Management Group, Inc. (OMG), Business Process Model and Notation (BPMN) version 2.0.2, 2013
  9. 대한건축학회, 건축구조설계기준 및 해설(KBC 2009), 기문당, 2009