DOI QR코드

DOI QR Code

The Proposal of Design Spectrum for Performance-Based Design and Vibration Control Structural System

성능설계 및 진동제어구조시스템 설계에 대비한 설계용 스펙트럼의 제안

  • Received : 2014.08.08
  • Accepted : 2014.12.03
  • Published : 2014.12.30

Abstract

In the seismic design, the design spectrum considering the responses of the acceleration, velocity, displacement and energy for the natural vibration period of structure is used. The acceleration response spectrum is the most frequently applied for the seismic design of structure in worldwide. In the case of using peak ground acceleration, the response characteristics of structure are reflected by using the acceleration response value because there is large uncertainties of the ground acceleration itself and it is difficult to consider the response characteristics of structure. The acceleration response spectrum is based on the linear elastic analysis on the single-degree of freedom system, however, practical structures are composed of the multi-degree of freedom system and allow for the plastic deformation, so that it makes a large difference between the both. In this study, the spectra such as the acceleration response and the energy equivalent velocity response are analyzed according to the structural behavior, the distribution of the force, stiffness and mass on each story of structure and the hysteresis characteristics. And the stability of the spectra is verified, so the propriety for the design spectrum is evaluated. Thus, the effective information is sorted for improving the accuracy of the seismic design.

Keywords

References

  1. H. Akiyama, "Earthquake-Resistant Design Method for Buildings Based on Energy Balance", Gihodoshuppan, 1999.
  2. A. K. Chopra, "Dynamics of Structures", Prentice Hall, 2004.
  3. T. K. Datta, "Seismic Analysis of Structures", Wiley, 2014.
  4. A. Elnashai, "Fundamentals of Earthquake Engineering", Wiley, 2008.
  5. A. K. Gupta, "Response Spectrum Method in Seismic Analysis and Design of Structures", CRC Press, 1992.
  6. H. Mahendra and R. K. Pujara, "Model Analysis of the Effects of Vibration on Multi-Story Structures", University of Wisconsin, 1965.
  7. K. A. Zalka, "Structural Analysis of Regular Multi-Storey Buildings", CRC Press, 2013.
  8. G. Kani, "Analysis of Multistory Frames", F. Ungar Pub., 1957.
  9. G. W. Housner, "Behavior of Structures during Earthquake", M.ASCE, 1959, p.p.283-303.
  10. 秋山宏, "建築物の耐震極限設計第2版", 東京大學出版會, 1987.
  11. 문태섭, 오상훈, 이선욱, "지진 입력 에너지에 의한 에너지 등가 속도 스펙트럼의 제안", 대한건축학회논문집, 16(4), 2000, p.p.3-9.
  12. 오상훈, 유홍식, "국내 지진하중을 고려한 에너지 등가 속도 스펙트럼의 제안", 한국강구조학회 학술발표대회논문집, 2007, p.p.184-187.
  13. 오상훈, 전종수, "설계 층내력분포 산정 기준에 따른 다층골조의 응답 특성", 대한건축학회논문집, 29(5), 2013, p.p.27-34.
  14. 국토해양부, "국내 건축구조기준 KBC2009", 국토해양부, 2009.