참고문헌
- E. Menard, R. G. Nuzzo and J. A. Rogers, "Bendable Single Crystal. Silicon Thin Film Transistors Formed by Printing on Plastic Substrates", Appl. Phys. Lett., 86, 093507 (2005). https://doi.org/10.1063/1.1866637
- W. Chen, T. L. Alford, T. F. Kuech and S. S. Lau, "High Electron Mobility Transistors on Plastic Flexible Substrates", Appl. Phys. Lett., 98, 203509 (2011). https://doi.org/10.1063/1.3593006
- J. S. Eom and S. H. Kim, "Plasma Surface Treatment of Polyimide for Adhesive Cu/80Ni20Cr/PI Flexible Copper Clad Laminate", Thin Solid Films, 516, 4530 (2008). https://doi.org/10.1016/j.tsf.2008.01.022
- I.-S. Kang, Y.-S. Koo and J.-H. Lee, "The Effects of Levelers on Electroplating of Thin Copper Foil for FCCL", J. Microelectron. Packag. Soc., 19(2), 67 (2012). https://doi.org/10.6117/kmeps.2012.19.2.067
- B. I. Noh, J. W. Yoon and S. B. Jung, "Effect of Laminating Parameters on the Adhesion Property of Flexible Copper Clad Laminate with Adhesive Layer", Int. J. Adhes. Adhes., 30, 30 (2010). https://doi.org/10.1016/j.ijadhadh.2009.07.001
- IPC Standard, "IPC-2223B Sectional Design Standard for Flexible Printed Boards" (2008).
- ASTM D2176 MIT Folding Endurance Test Method.
- B.-I. Noh, J.-W. Yoon and S.-B. Jung, "Effect of Ni-Cr Seed Layer Thickness on the Adhesion Characteristics of Flexible Copper Clad Laminates Fabricated using a Roll-to-Roll Process", Met. Mater. Int., 16, 779 (2010). https://doi.org/10.1007/s12540-010-1013-8
- B.-I. Noh, J.-W. Yoon and S.-B. Jung, "Fabrication and Adhesion Strength of Cu/Ni-Cr/polyimide Films for Flexible Printed Circuits", Microelectronic Engineering, 88, 1024 (2011). https://doi.org/10.1016/j.mee.2011.01.071
- K.-J. Min, S.-C. Park, J.-J. Lee, K.-H. Lee, G.-H. Lee and Y.-B. Park, "Interfacial Ffracture Eenergy between Electroless Plated Ni Film and Polyimide for Flexible PCB Application", J. Microelectron. Packag. Soc., 14(1), 39 (2007).
- S.-H. Bang, K.-K. Kim, H.-Y. Jung, T.-H. Kim, S.-H. Jeon, J.-B. Seol, "Application of NiMoNb Adhesion Layer on Plasma-treated Polyimide Substrate for Flexible Electronic Devices", Thin Solid Films, 558, 405 (2014). https://doi.org/10.1016/j.tsf.2014.02.085
- W. C. M. Filho, S. Hameau and M. Brizoux, "Evaluation of Very Low Bending Radius of Flexible Circuits Beyond the Standard Design Rules", 13th. Int. Conference on Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 1 (2012).
- S.-I Park, J.-H. Ahn, S. Wang, Y. G. Huang and J. A. Rogers, "Theoretical and Experimental Studies of Bending of Inorganic Electronic Materials on Plastic Substrates", Adv. Funct. Mater., 18, 2673 (2008). https://doi.org/10.1002/adfm.200800306
- Z. Suo, E. Y. Ma, H. Gleskova, and S. Wagner, "Mechanics of Rollable and Foldable Film-On-Foil Electronics", Appl. Phys. Lett., 74, 1177 (1999). https://doi.org/10.1063/1.123478
- A. Ptchelintsev, "Automated Modeling and Fatigue Analysis of Flexible Printed Circuits", 7th. Int. Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 1, (2006).
피인용 문헌
- Measurement of Flexural Modulus of Lamination Layers on Flexible Substrates vol.23, pp.3, 2016, https://doi.org/10.6117/kmeps.2016.23.3.063
- LED조명에서 MPCB와 FPCB의 방열 성능 비교 연구 vol.26, pp.4, 2014, https://doi.org/10.7735/ksmte.2017.26.4.371