Elastomers and Composites

  • 제49권4호
  • /
  • Pages.293-304
  • /
  • 2014
  • /
  • 2092-9676(pISSN)
  • /
  • 2288-7725(eISSN)
한국고무학회 (The Rubber Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

고무 공기 스프링용 CR/Nylon 6 코드 고무 슬리브에 대한 연구

Research on CR/Nylon 6 Cord Rubber Sleeve of Rubber Air Spring

  • 서재찬 (경북대학교 고분자공학과) ;
  • 김대진 (경북대학교 산학협력선도대학사업단) ;
  • 박해윤 (경북대학교 고분자공학과) ;
  • 서관호 (경북대학교 고분자공학과)
  • Seo, Jae-Chan (Department of Polymer Science & Engineering, Kyungpook National University) ;
  • Kim, Dae-Jin (Agency of LINC, Kyungpook National University) ;
  • Park, Hae-Youn (Department of Polymer Science & Engineering, Kyungpook National University) ;
  • Seo, Kwan-Ho (Department of Polymer Science & Engineering, Kyungpook National University)
  • 투고 : 2014.10.20
  • 심사 : 2014.12.03
  • 발행 : 2014.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

고무 공기 스프링(rubber air spring)은 자동차, 철도차량 등 수송기기의 서스펜션 장치로 사용되고 있다. 고무 공기 스프링은 고무 에어백의 압축과 팽창을 통한 탄성효과로 스프링의 역할을 한다. 고무 공기 스프링의 주요 구성요소 중 하나가 고무 슬리브(rubber sleeve)이다. 고무 슬리브는 주요 구성성분인 클로로프렌 고무와 나일론 6 코드 간의 접착이 매우 중요하다. 본 연구에서는 첨가제의 영향을 고려한 고무 슬리브의 최적 배합조성과 조건을 찾기 위해 다양한 물성시험을 하였다. 또한, 보강섬유의 최적 배향을 선정하기 위해 유한요소해석법을 이용한 수치해석을 수행하였다. 고무 공기 스프링을 제조하여 실제 차량에 장착하여 기초물성과 피로수명 및 기밀성을 시험하였다.

Rubber air spring (RAS) is a special suspension device for the industries of automobile, railroad car and other transportation. A RAS serves as a spring component with the elastic effect of compression and expansion of air in a composite rubber bag. The main component of RAS is the rubber sleeve. Rubber sleeve is the composite which is made up of combination of chloroprene rubber (CR) and nylon 6 cord, and the adhesive strength between CR and nylon 6 cord is very important. In this study, considering the effects of additives in rubber sleeve, various physical properties were tested to find the optimal combination of composition and conditions. Further, in order to select the optimum orientation of the reinforcing fibers, numerical analysis was performed using the finite elements method. After assembling all components of RAS, it was mounted on an actual vehicle, and then it was tested air leakage, fatigue life and fundamental properties.

키워드

참고문헌

  1. 김진국, "자동차 고무부품", 미래컴, 2005.
  2. 한국고무학회, "고무학회 40년사", 한국고무학회, 2006.
  3. Nojin Jeong, Chungwoon Kim, and Byeongsoo Kim, "Prediction and Evaluation of Characteristics of Air Spring for Commercial Vehicle Using the Non-linear Finite Element Method", KSAE, 7, 38 (2007).
  4. 한국고무학회, "고무재료와 가공기술", 한국고무학회, 2008.
  5. Yang Wei-min, Chen Can-hui, Chen Ya-ling, and Ren Yan-sha, "Finite element Analysis of an Air Spring for Automobile Suspension", Journal of Beijing University of Chemical Technology, 31, 105 (2004).
  6. Robert F. Ohm, The Vanderbilt Rubber Handbook, ed. by Robert F. Ohm, 3rd Ed, R. T. Vanderbilt Company Inc., Norwalk, 1990.
  7. J. N. Reddy, "An Introduction to the Finite Element Method", ed. by J. N. Reddy, 1st Ed, Mcgraw-Hill College, New York, 1984.
  8. 日本 電氣化學工業 株式會社, Denka Chloroprene Handbook, ed. 日本 電氣化學工業 株式會社, 1st Ed, 剛信産業, Korea, 1990.
  9. Lord Corporation, "Chemlok #220 Adhesive", Lord technical data, Lord Corporation, 2008.
  10. Annual Book of ASTM Standards, Designation: D3182 Vol. 09.01, ASTM International, Pennsylvania, 1995.
  11. A. V. Pocius, "Adhesion and Adhesives Technology", ed. by A. V. Pocius, 2nd Ed, Hanser Gardner Publications, Cincinnati, 2002.
  12. Khairi Nagdi, "Rubber as an Engineering Material : Guideline for Users", ed. by Khairi Nagdi, 1st Ed, Hanser Gardner Publications, Cincinnati, 1993.
  13. H. R. Allcock, F. W. Lampe and J. E. Mark, "Contemporary Polymer Chemistry", ed. by H. R. Allcock, F. W. Lampe and J. E. Mark, 3rd Ed, Prentice Hall, New York, 2003.
  14. Alan N. Gent, "Engineering with rubber : How to design Rubber Components", ed. by Alan N. Gent, 2nd Ed, Hanser Gardner Publications, Cincinnati, 2001.
  15. I. Franta, "Elastomers and Rubber Compounding Materials : Manufacture, Properties and Applications", ed. by I. Franta, 1st Ed, Elsevier Science Publishers, New York, 1989.
  16. J. A. Brydson, "Rubbery Materials and their Compounds", ed. by J. A. Brydson, 1st Ed, Springer, New York, 1988.
  17. 김준수, 고무配合데이터 핸드북, 도서출판 기술, 2002.
  18. M. Morton, "Rubber Technology", ed. by M. Morton, 3rd Ed, Springer, New York, 1987.
  19. D. H. Kaelble, "Physical Chemistry of Adhesion", ed. by D. H. Kaelble, 1st Ed, John Wiley & Sons Inc, New York, 1971.
  20. Gerhard Gierenz and Werner Karmann, "Adhesives and Adhesive Tapes", ed. by Gerhard Gierenz and Werner Karmann, 1st Ed, Wiley-VCH, New York, 2001.
  21. Kurt Miller, "Laboratory Characterization of Elastomers for Finite Element Analysis", Physical Testing Service Conference, Axel Product, 2001.