Structural Engineering and Mechanics

  • 제48권6호
  • /
  • Pages.757-774
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A numerical tool for thermo-mechanical analysis of multilayer stepped structures

  • Bagnoli, Paolo Emilio (Department of Information Engineering, University of Pisa) ;
  • Girardi, Maria (Institute of Information Science and Technologies "A. Faedo" National Research Council of Italy ISTI-CNR) ;
  • Padovani, Cristina (Institute of Information Science and Technologies "A. Faedo" National Research Council of Italy ISTI-CNR) ;
  • Pasquinelli, Giuseppe (Institute of Information Science and Technologies "A. Faedo" National Research Council of Italy ISTI-CNR)
  • 투고 : 2012.06.06
  • 심사 : 2013.11.09
  • 발행 : 2013.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

An integrated simulation tool for multilayer stepped pyramidal structures is presented. The tool, based on a semi-analytical mathematical strategy, is able to calculate the temperature distributions and thermal stresses at the interfaces between the layers of such structures. The core of the thermal solver is the analytical simulator for power electronic devices, DJOSER, which has been supplemented with a mechanical solver based on the finite-element method. To this end, a new ele-ment is proposed whose geometry is defined by its mean surface and thickness, just as in a plate. The resulting mechanical model is fully three-dimensional, in the sense that the deformability in the direction orthogonal to the mean surface is taken into account. The dedicated finite element code developed for solving the equilibrium problem of structures made up of two or more superimposed plates subjected to thermal loads is applied to some two-layer samples made of silicon and copper. Comparisons performed with the results of standard finite element analyses using a large number of brick elements reveal the soundness of the strategy employed and the accuracy of the tool developed.

키워드

참고문헌

  1. Bagnoli, P.E., Bartoli, C. and Stefani, F. (2007a), "Validation of the DJOSER Analytical thermal simulator for electronic power devices and assembling structures", Microelectron. J., 38, 185-196. https://doi.org/10.1016/j.mejo.2006.10.001
  2. Bagnoli, P.E, Casarosa, C. and Stefani, F. (2007b), "DJOSER: analytical thermal simulator for multilayer electronic structures. theory and numerical implementation", Proceedings of Thermal Issues in Emerging Technologies Conference, ThETA 1, Cairo, January.
  3. Bagnoli, P.E., Padovani, C., Pagni, A. and Pasquinelli, G. (2008), "Integrating a thermo-mechanical solver into the DJOSER analytical thermal simulator for multilayer power electronic assemblies. Preliminary results", Proceedings of the Second International Conference on Thermal Issues in Emerging Technologies, Cairo, December.
  4. Bagnoli, P.E., Girardi, M., Padovani, C., Pagni, A. and Pasquinelli, G.. (2009), "Thermo-mechanical solver for multi layer packages of power electronic devices and systems. Preliminary results", Proceedings of the UIT 2009 - 27th UIT National Heat Transfer Conference, Reggio Emilia, June.
  5. Bagnoli, P.E., Girardi, M., Padovani, C., Pagni, A. and Pasquinelli, G. (2010), "Thermo-mechanical analysis of 3-d multilayer structures for power electronic devices", THETA3 - Proceedings of the Third International Conference on Thermal Issues in Emerging Technologies - Theory and Applications, Cairo, December.
  6. Bagnoli, P.E., Padovani, C., Pagni, A. and Pasquinelli, G. (2011), "A thermo-mechanical solver for multilayer power electronic assemblies integrated into the DJOSER thermal simulator", J. Electr. Packag., 133, 011005-1 - 011005-7. https://doi.org/10.1115/1.4003516
  7. Carrera, E. (2004), "On the use of the Murakami's zig-zag function in the modeling of layered plates and shells", Comput. Struct., 82, 541-554. https://doi.org/10.1016/j.compstruc.2004.02.006
  8. Crosby, T. and Ghoniem, N.M. (2011) "Thermo-Mechanical damage of tungsten surfaces exposed to rapid transient plasma heat loads", Interact. Multiscale Mech., 4 (3), 207-217. https://doi.org/10.12989/imm.2011.4.3.207
  9. De Borst, R. and Sadowski, T. (2008). Lecture notes in composite materials - Current topics and achievements, Springer.
  10. Gherlone, M. and Di Sciuva, M. (2007), "Thermo-mechanics of undamaged and damaged multilayered composite plates: assessment of the FEM sub-laminates approach", Compos. Struct., 81, 137-155. https://doi.org/10.1016/j.compstruct.2006.08.005
  11. Grigolyuk, E.I. and Tolkachev, V.M. (1980), Contact problems in the theory of plates and shells, Mir Publishers, Moscow.
  12. Grigolyuk, E.I., Kogan, Y.A. and Mamai, V.I. (1994), "Problems of the deformation of thin-walled laminated structures with layer separation", Ross. Akad. Nauk MTT, 2, 6-32.
  13. Grigolyuk, E.I., Kogan, Y.A. and Mamai, V.I. (1995), "A model of the deformation of a non-uniformly heated three-layers rod with delaminations", J. Appl. Math. Mech., 59 (3), 449-457. https://doi.org/10.1016/0021-8928(95)00052-Q
  14. Hsueh, C.H., Lee, S.B. and Lin, H.Y. (2006), "Analyses of mode I edge delamination by thermal stresses in multilayer systems", Compos., Part B, 37, 1-9.
  15. Lo, S.H., Zhen, W., Sze, K.Y. and Chen, W.J. (2011), "C0-type global.local theory with non-zero normal strain for the analysis of thick multilayer composite plates", Comput. Mech., 47, 479-491. https://doi.org/10.1007/s00466-010-0554-5
  16. Montesi, M., Bagnoli, P.E., Casarosa, C. and Pasquinelli, G. (2004), "Steady-state thermal mapping of electronic devices with multi-layer stack mountings by analytical relationships", Proceedings of ITSS II ASME-ZSIS Conference, Bled, Slovenia, June.
  17. Robaldo, A. (2006), "Finite element analysis of the influence of temperature profile on thermoelasticity of multilayered plates", Comput. Struct., 84, 1236-1246. https://doi.org/10.1016/j.compstruc.2006.01.022
  18. Saidi, H., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2013), "Thermo-mechancal bending response with stretching effect of functionally graded sandwich plates using a novel shear deformation theory", Steel Compos. Struct., 15, 221-245. https://doi.org/10.12989/scs.2013.15.2.221
  19. Simhonian, A.M. and Sanoyan, Y.G. (2009), "Investigation of the plane stress state of a multilayer structure under heat variations", Mech. Solid., 44(5), 756-761. https://doi.org/10.3103/S0025654409050124
  20. Suhir, E. and Weld, J.D. (1998), "Application of a 'surrogate' layer for lower bending stress in a vulnerable material of a tri-material body", Microelectron. Reliab., 38, 1949-1954. https://doi.org/10.1016/S0026-2714(98)00155-3
  21. Suhir, E. (2000), "Adhesively bonded assemblies with identical nondeformable adherends and 'piecewise continuous' adhesive layer: predicted thermal stresses in the adhesive", Int. J. Solid. Struct., 37, 2229-2252. https://doi.org/10.1016/S0020-7683(98)00317-5
  22. Suhir, E. (2011), "Predictes stresses in die-carrier assemblies in "stretchable" electronics: is there an incentive for using a compliant bond", ZAMM Z. Angew. Math. Mech., 91(1), 57-67. https://doi.org/10.1002/zamm.201000108
  23. Timoshenko, S.P. and Woinowsky-Krieger, S. (1959), Theory of plates and shells, McGraw-Hill Internatioal Editions.
  24. Wu, L.Z. (2004), "Thermoelastic analysis of chip-substrate system", J. Electron. Packag., 126, 326-332.
  25. Xie, W.D. and Sitaraman, S.K. (2000), "Interfacial thermal stress analysis of anisotropic multi-layered eletronic packaging structures", J. Electron. Packag., 122, 66-68.
  26. Zhen, W. and Chen, W.J. (2007), "A quadrilateral element based on refined global-local higher-order theory for coupling bending and extension thermo-elastic multilayered plates", Int. J. Solid. Struct., 44, 3187-3217. https://doi.org/10.1016/j.ijsolstr.2006.09.015
  27. Zienkiewicz, O.C. and Taylor, R.L. (1989), The Finite Element Method, Basic formulation and linear problems, Fourth Edition, Volume 1, McGraw-Hill, London, UK.