DOI QR코드

DOI QR Code

Localized deformation in sands and glass beads subjected to plane strain compressions

  • Zhuang, Li (Civil, Environmental and Architectural Engineering, Korea University) ;
  • Nakata, Yukio (Civil and Environmental Engineering, Yamaguchi University) ;
  • Lee, In-Mo (Civil, Environmental and Architectural Engineering, Korea University)
  • 투고 : 2012.10.08
  • 심사 : 2013.07.23
  • 발행 : 2013.12.25

초록

In order to investigate shear behavior of granular materials due to excavation and associated unloading actions, load-controlled plane strain compression tests under decreasing confining pressure were performed under drained conditions and the results were compared with the conventional plane strain compression tests. Four types of granular material consisting of two quartz sands and two glass beads were used to investigate particle shape effects. It is clarified that macro stress-strain behavior is more easily influenced by stress level and stress path in sands than in glass beads. Development of localized deformation was analyzed using photogrammetry method. It was found that shear bands are generated before peak strength and shear band patterns vary during the whole shearing process. Under the same test condition, shear band thickness in the two sands was smaller than that in one type of glass beads even if the materials have almost the same mean particle size. Shear band thickness also decreased with increase of confining pressure regardless of particle shape or size. Local maximum shear strain inside shear band grew approximately linearly with global axial strain from onset of shear band to the end of softening. The growth rate is found related to shear band thickness. The wider shear band, the relatively lower the growth rate. Finally, observed shear band inclination angles were compared with classical Coulomb and Roscoe solutions and different results were found for sands and glass beads.

키워드

참고문헌

  1. Alshibli, K.A. and Sture, S. (2000), "Shear band formation in plane strain experiments of sand", J. Geotech. Geoenviron. Eng., 126(6), 495-503. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:6(495)
  2. Alshibli, K.A. and Alsaleh, M.I. (2004), "Characterizing surface roughness and shape of sands using digital microscopy", J. Comput. Civil. Eng., 18(1), 36-45. https://doi.org/10.1061/(ASCE)0887-3801(2004)18:1(36)
  3. Cho, G.C., Dodds, J. and Santamarina, J.C. (2006), "Particle Shape Effects on Packing Density, Stiffness, and Strength: Natural and Crushed Sands", J. Geotech. Geoenviron. Eng., 132(5), 591-602. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:5(591)
  4. Chu, J., Leong, W.K., Loke, W.L. and Wanatowski, D. (2012), "Instability of loose sand under drained conditions", J. Geotech. Geoenviron. Eng., 138(2), 207-216. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000574
  5. Chu, J. and Wanatowski, D. (2009), "Effect of loading mode on strain softening and instability behavior of sand in plane-strain test", J. Geotech. Geoenviron. Eng., 135(1), 108-120. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:1(108)
  6. Desrues, J. and Viggiani, G. (2004), "Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry", Int. J. Numer. Anal. Method. Geomech., 28, 279-321. https://doi.org/10.1002/nag.338
  7. Finno, R.J., Harris, W.W., Mooney, M.A. and Viggiani, G. (1997), "Shear bands in plane strain compression of loose sand", Geotechnique, 47(1), 149-165. https://doi.org/10.1680/geot.1997.47.1.149
  8. Guo, P.J. and Stolle, D.F.E. (2005), "On the failure of granular material with fabric effects", Soils Found., 45(4), 1-12. https://doi.org/10.3208/sandf.45.1
  9. Guo, P.J. and Su, X.B. (2007), "Shear strength, interparticle locking, and dilatancy of granular materials", Can. Geotech. J., 44(5), 579-591 https://doi.org/10.1139/t07-010
  10. Hall, S.A., Bornert, M., Desrues, J., Pannier, Y., Lenoir, N., Viggiani, G. and Bésuelle, P. (2010), "Discrete and continuum analysis of localised deformation in sand using X-ray ${\mu}CT$ and volumetric digital image correlation", Geotechnique, 60(5), 315-322. https://doi.org/10.1680/geot.2010.60.5.315
  11. Head, K.H. (1992), Effective Stress Tests - Manual of Soil Laboratory Testing, (2nd Edition), Vol. 3, Pentech Press, London.
  12. Katagiri, J., Matsushima, T. and Yamada, Y. (2010), "Simple shear simulation of 3D irregularly-shaped particles by image-based DEM", Granular Matter, 12, 491-497. https://doi.org/10.1007/s10035-010-0207-6
  13. Maeda, K., Sakai, H., Kondo, A., Yamaguchi, T., Fukuma, M. and Nukudani, E. (2010), "Stress-chain based micromechanics of sand with grain shape effect", Granul. Matter, 12(5), 499-505. https://doi.org/10.1007/s10035-010-0208-5
  14. Masuda, T., Tatsuoka, F., Yamada, S. and Sato, T. (1999), "Stress-strain behavior of sand in plane strain compression, extension and cyclic loading tests", Soils Found., 39(5), 31-45.
  15. Matsushima, T. and Chang, C.S. (2011), "Quantitative evaluation of the effect of irregularly shaped particles in sheared granular assemblies", Granul. Matter, 13(3), 269-276. https://doi.org/10.1007/s10035-011-0263-6
  16. Oda, M. and Iwashita, K. (2000), "Study on couple stress and shear band development in granular media based on numerical simulation analyses", Int. J. Eng. Sci., 38(15), 1713-1740. https://doi.org/10.1016/S0020-7225(99)00132-9
  17. Rechenmacher, A.L. (2006), "Grain-scale process governing shear band initiation and evolution in sands", J. Mech. Phys. Solids, 54(1), 22-45. https://doi.org/10.1016/j.jmps.2005.08.009
  18. Rechenmacher, A.L. and Finno, R.J. (2004), "Digital image correlation to evaluate shear banding in dilative sands", Geotech. Test. J., 27(1), 13-22.
  19. Rochter, L., Konig, D., Schanz, T. and Triantafyllidis, T. (2010), "Shear banding and strain softening in plane strain extension, physical modeling", Granular Matter, 12(3), 287-301. https://doi.org/10.1007/s10035-010-0180-0
  20. Rochter, L., Konig, D., Schanz, T., Niemunis, A. and Triantafyllidis, T. (2011), "Shear band systems in plane strain extension: analytical solution and comparison with experimental results", Granul. Matter, 13(5), 553-563. https://doi.org/10.1007/s10035-011-0268-1
  21. Sezer, A., Altun, S. and Goktepe, B.A. (2011), "Relationships between shape characteristics and shear strength of sands", Soils Found., 51(5), 857-871. https://doi.org/10.3208/sandf.51.857
  22. Shinohara, K., Oida, M. and Golman, B. (2000), "Effect of particle shape on angle of internal friction by triaxial compression test", Powder Technolo., 107(1-2), 131-136. https://doi.org/10.1016/S0032-5910(99)00179-5
  23. Tatsuoka, F., Nakamura, S., Huang, C.C. and Tani, K. (1990), "Strength anisotropy and shear band direction in plane strain tests of sand", Soils Found., 30(1), 35-54. https://doi.org/10.3208/sandf1972.30.35
  24. Tejchman, J., Bauer, E. and Wu, W. (2007), "Effect of fabric anisotropy on shear localization in sand during plane strain compression", Acta Mechanica, 189(1-4), 23-51. https://doi.org/10.1007/s00707-006-0416-6
  25. Wanatowski, D. and Chu, J. (2006), "Stress-strain behavior of a granular fill measured by a new plane-strain apparatus", Geotech. Test. J., 29(2), 149-157.
  26. Wanatowski, D., Chu, J. and Loke, W.L. (2010), "Drained instability of sand in plane strain", Can. Geotech. J., 47(4), 400-412. https://doi.org/10.1139/T09-111
  27. White, D.J., Take, W.A. and Bolton, M.D. (2003), "Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry", Geotechnique, 53(7), 619-631. https://doi.org/10.1680/geot.2003.53.7.619

피인용 문헌

  1. Influence of dilatancy on shear band characteristics of granular backfills pp.2116-7214, 2019, https://doi.org/10.1080/19648189.2019.1572542
  2. Determination of active failure surface geometry for cohesionless backfills vol.12, pp.6, 2017, https://doi.org/10.12989/gae.2017.12.6.983
  3. Influences of seepage force and out-of-plane stress on cavity contracting and tunnel opening vol.13, pp.6, 2013, https://doi.org/10.12989/gae.2017.13.6.907