Journal of Power System Engineering (동력기계공학회지)

The Korean Society for Power System Engineering (한국동력기계공학회)
권호 표지
DOI QR코드

DOI QR Code

A Review on Nano Applications: Fluids and Heat Transfer

  • Published : 2013.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Keywords

References

  1. Y. H. Shin, 2004, "Comprehension of the nanotechnology and trend of engineering development", Korean Association of Science and Technology Studies, pp. 57-66.
  2. http://www.trynano.org/History.html
  3. U. S. Choi and J. A. Eastman, 1995, "Enhancing Thermal Conductivity of Fluid with Nanoparticles", ASME International Mechnical Engineering Congress & Exposition.
  4. S. P. Jang, 2006, "Technical Trend and Future of nanofluid", The Korean Society of Mechanical Engineers, Vol. 46, No.7, pp. 34-36.
  5. Argonne National Laboratory, 2009, "Development, Characterization, Production, and Demonstration of Nanofluids for Industrial Cooling Applications."
  6. K. Ma and J. Liu, 2007, "Nano liquid-metal fluid as ultimate coolant.",Phys. Lett. A, Vol. 361, pp. 252-256. https://doi.org/10.1016/j.physleta.2006.09.041
  7. W. Duangthongsuk and S. Wongwises, 2010, "An experimental study on the heat transfer performance and pressure drop of TiO2-water nanofluids flowing under a turbulent flow regime.", International Journal of Heat and Mass Transfer, Vol. 53, pp. 334-344. https://doi.org/10.1016/j.ijheatmasstransfer.2009.09.024
  8. A.R. Sajadi and A.F. Dizaji, "Investigation of Turbulent Convective Heat Transfer and Pressure Drop of Al2O3/Water Nanofluid in Circular Tube.",Middle-East Journal of Scientific Research, Vol. 12, No. 11, pp. 1553-1559.
  9. G. Huminic and A. Huminic, 2012, "Application of nanofluids in heat exchangers: A review.", Renewable and Sustainable Energy Reviews, Vol. 16, pp. 5625-5638. https://doi.org/10.1016/j.rser.2012.05.023
  10. B. Chun, H. U. Kang and S. H. Kim, 2008, "Effect of alumina nanoparticles in the fluid on heat transfer in double-pipe heat exchanger system", Korean J. Chem. Eng., Vol. 25, No.5, pp. 966-971. https://doi.org/10.1007/s11814-008-0156-5
  11. F. Khoddamrezaee, R. Motallebzadeh, D. JajaliVahid, 2010, "Simulation of (EG+Al2O3) nanofluid through the shell and tube heat exchanger with rectangular arrangement of tubes and constant heat flux", Journal of Applied Sciences, Vol. 10, Issue 6, pp.500-505. https://doi.org/10.3923/jas.2010.500.505
  12. A. K. Tiwari, P. Ghosh, J. Sarkar, 2013, "Performance comparison of the plate heat exchanger using different nanofluids", Experimental Thermal and Fluid Science, Vol. 49, pp. 141-151. https://doi.org/10.1016/j.expthermflusci.2013.04.012
  13. Y. J. Hwang, Y. C. Ahn, H. S. Shin, C. G. Lee, G. T. Kim, H. S. Park and J. K. Lee,2005, "Investigation on characteristics of thermal conductivity enhancement of nanofluids.", Current Applied Physics, Vol. 6, Issue 6, pp. 1068-1071.
  14. Z. H. Han, F. Y. Cao and B. Yang,2008, "Synthesis and thermal characterization of phase-changeable indium/polyalphaolefinnanofluids.", Appl. Phys. Lett., Vol. 92, pp. 243104-243106. https://doi.org/10.1063/1.2944914
  15. S. Lee, H. J. Kim, S. Y. Lee, K. H. Kim, Y. Park, J. Lee, J. Seo, S. M. Chaand S. P. Jang,2013, "A Study on the Thermal Performance of Water-based Carbon Nanotubes (CNT) Nanofluids in Laminar Flow Region.", KSME, pp. 154-155.
  16. R. Saidura, K.Y. Leong and H.A. Mohammad, 2011, "A review on applications and challenges of nanofluids.", Renewable and Sustainable Energy Reviews, Vol. 15, pp. 1646-1668. https://doi.org/10.1016/j.rser.2010.11.035
  17. H. B. Ma, C. Wilson, B. Borgmeyer, K. Park, Q. Yu, S. U. S. Choi and M. Tirumala, 2006, "Effect of nanofluid on the heat transport capability in an oscillating heat pipe", Appl. Phys. Lett., Vol. 88, No. 14, pp. 143116-143118. https://doi.org/10.1063/1.2192971
  18. P. Naphon, P. Assadamongkol and T. Borirak, 2008, "Experimental investigation of titanium nanofluids on the heat pipe thermal efficiency", International Communications in Heat and Mass Transfer, Vol. 35, No. 10, pp. 1316-1319. https://doi.org/10.1016/j.icheatmasstransfer.2008.07.010
  19. M. Shafahi, V. Bianco, K. Vafai and O. Manca, 2008, "Thermal performance of flat-shaped heat pipes using nanofluids", International Journal of Heat and Mass Transfer, Vol. 53, pp. 1438-1445.
  20. K. V. Wong and O. D. Leon, 2010, "Applications of Nanofluids: Current and Future.", Advances in Mechanical Engineering, Vol. 2010,Article ID 519659,11 pages.
  21. K. V. Sharma, K. Kadirgama, W. A. W. Hamzah, R. Mamat, R. A. Bakar, R. Prasad and A. Gupta, 2011, "NANOFLUIDS -THE FUTURE INDUSTRIAL COOLANTS."
  22. K. Y. Leong, R. Saidur, S. N. Kazi and A. H. Mamun, 2010, "Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator)", Applied Thermal Engineering, Vol. 30, pp. 2685-2692. https://doi.org/10.1016/j.applthermaleng.2010.07.019
  23. N. Bozorgan, M. Mafi, and N. Bozorgan, 2012, "Performance Evaluation of AI2O3/Water Nanofluid as Coolant in a Double-Tube Heat Exchanger Flowing under a Turbulent Flow Regime", Advances in Mechanical Engineering, Vol. 2012.
  24. M. Eftekhar, A. Keshavarz, A. Ghasemian, and J. Mahdavinia, 2013, "The Impact of Nano-fluid Concentration Used as an Engine Coolant on the Warm-up Timing", International Journal of Automotive Engineering, Vol. 3, No. 1, pp. 365-367.
  25. G. H. Yu, 2007, "Direction of improvement in nanotechnology Medical Equipment", The Ministry of Food and Drug Safety.
  26. P. Ghosh, G. Han, M. De, C. K. Kim and V. M. Rotello, 2008, "Gold nanoparticles in delivery applications.", Advanced Drug Delivery Reviews, Vol. 60, pp. 1307-1315. https://doi.org/10.1016/j.addr.2008.03.016
  27. X. Yang, Y. Wang, X. Huang, Y. Ma, Y. Huang, R. Yang, H. Duan and Y. Chen, 2011, "Multi-functionalized graphene oxide based anticancer drug-carrier with dual-targeting function and pH-sensitivity.",J. Mater. Chem., Vol. 21, pp. 3448-3454. https://doi.org/10.1039/C0JM02494E
  28. P. Jeyamohan, T. Hasumura, Y. Nagaoka, Y. Yoshida, T. Maekawa and D.S. Kumar, 2013, "Accelerated killing of cancer cells using a multifunctional single-walled carbon nanotubebased system for targeted drug delivery in combination with photothermal therapy.", International Journal of Nanomedicine,Vol. 8, pp. 2653-2667.
  29. W. Yu and H. Xie, 2012, "A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications.", Journal of Nanomaterials, Vol. 2012, Article ID 435873, 17 pages.
  30. M. F. Demirbas, 2006, "Thermal Energy Storage and Phase Change Materials: An Overview.", Energy Sources, Part B, Vol. 1, No. 1, pp. 85-95. https://doi.org/10.1080/009083190881481
  31. J. M. Khodadadi and S. F. Hosseinizadeh, 2007, "Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage.", International Communications in Heat and Mass Transfer, Vol. 34, pp. 534-543. https://doi.org/10.1016/j.icheatmasstransfer.2007.02.005
  32. D. Shin and D. Banerjee, 2011, "Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications.", International Journal of Heat and Mass Transfer, Vol. 54, pp. 1064-1070. https://doi.org/10.1016/j.ijheatmasstransfer.2010.11.017
  33. S. Cingarapu, D. Singh, E. V. Timofeeva and M. R. Moravek, 2013, "Nanofluids with encapsulated tin nanoparticles for advanced heat transfer and thermal energy storage.", Int. J. Energy Res.
  34. T. Changand C. Lee,2012, "A Trend on Applications and Challenges of Nanofluids.", The Korean Society of Marine Engineering, Vol. 36, No. 8, pp. 984-996.

Cited by

  1. Effects of Nanofluids in Improving the Efficiency of the Conical Concentrator System vol.15, pp.1, 2013, https://doi.org/10.3390/en15010028