Structural Engineering and Mechanics

  • 제48권4호
  • /
  • Pages.479-500
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Lateral deformation capacity and stability of layer-bonded scrap tire rubber pad isolators under combined compressive and shear loading

  • 투고 : 2012.10.19
  • 심사 : 2013.10.26
  • 발행 : 2013.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the experimental as well as analytical study conducted on layer-bonded scrap tire rubber pad (STRP) isolators to develop low-cost seismic isolators applicable to structures in developing countries. The STRP specimen samples were produced by stacking the STRP layers one on top of another with the application of adhesive. In unbonded application, the STRP bearings were placed between the substructure and superstructure without fastening between the contact surfaces which allows roll-off of the contact supports. The vertical compression and horizontal shear tests were conducted with varying axial loads. These results were used to compute the different mechanical properties of the STRP isolators including vertical stiffness, horizontal effective stiffness, average horizontal stiffness and effective damping ratios. The load-displacement relationships of STRP isolators obtained by experimental and finite element analysis results were found to be in close agreement. The tested STRP samples show energy dissipation capacity considerably greater than the natural rubber bearings. The layer-bonded STRP isolators serve positive incremental force resisting capacity up to the shear strain level of 150%.

키워드

참고문헌

  1. Ahmet, T. and Bayezid, O. (2008), "Seismic base isolation using low-cost Scrap Tire Pads (STP)", Materials and Structures, 41(5), 891-908. https://doi.org/10.1617/s11527-007-9292-3
  2. Ali, A., Hosseini, M. and Sahari, B.B. (2010), "A review of constitutive models for rubber-like materials", American J. of Engineering and Applied Science, 3(1), 232-239. https://doi.org/10.3844/ajeassp.2010.232.239
  3. ASCE-7 (2005), Minimum design loads for building and other structures, ASCE/SEI 7-05, New York, American Society of Civil Engineers.
  4. Ashkezari, G.D., Aghakouchak, A.A. and Kokabi, M. (2008), "Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators", Journal of Material Processing Technology, 197(1-3), 140-150. https://doi.org/10.1016/j.jmatprotec.2007.06.023
  5. Eurocode 8 (2004), Design of Structures for Earthquake Resistance.
  6. Helnwein, P., Liu, C.H., Meschke, G. and Mang, H.A. (1993), "A new 3-D finite element model for cord-reinforced rubber composites-Application to analysis of automobile tires", Finite Elements in Analysis and Design, 14(1), 1-16. https://doi.org/10.1016/0168-874X(93)90075-2
  7. Herrmann, L.R. (1965), "Elasticity equations for incompressible and nearly incompressible materials by variational theorem", AIAA Journal, 3(10), 1896-1900. https://doi.org/10.2514/3.3277
  8. Kelly, J.M. (1997), Earthquake-resistant Design with Rubber, 2nd Edition, Springer-Verlag, London.
  9. Kelly, J.M. (2002), "'Seismic isolation system for developing countries", Earthquake Spectra, 18 (3), 385-406. https://doi.org/10.1193/1.1503339
  10. Kelly, J.M. and Konstantinidis, D. (2007), "Low-cost seismic isolators for housing in highly-seismic developing countries", 10th World Conference on Seismic Isolation, Energy Dissipation and Active Vibrations Control of Structures, Istanbul, Turkey, May.
  11. Mishra, H.K. and Igarashi, A. (2012), "Experimental and analytical study of scrap tire rubber pad for seismic isolation", World Academy of Science, Engineering and Technology, Issue 62, (Proc. International Conference on Earthquake and Structural Engineering), Kuala Lumpur, February.
  12. Mishra, H.K., Igarashi, A. and Matsushima, H. (2011), "Finite element analysis of scrap tire rubber pads as base isolation device"', Proc. 24th KKCNN Symposium on Civil Engineering, Hyogo, December.
  13. Mishra, H.K., Igarashi, A. and Matsushima, H. (2012), "Finite element analysis and experimental verification of the scrap tire rubber pad isolator", Bulletin of Earthquake Engineering, 11(2), 687-707.
  14. Mordini, A. and Strauss, A. (2008), "An innovative earthquake isolation system using fiber reinforced rubber bearings", Engineering Structures, 30 (10), 2739-2751. https://doi.org/10.1016/j.engstruct.2008.03.010
  15. MSC Software (2008r1), MSC Marc 2010 and MSC Marc Mentat 2010, Santa Ana, California.
  16. MSC. Marc (2010), Theory and user information, Vol. A Santa Ana, CA, MSC Software Corporation Inc.
  17. MSC Software (2000), Nonlinear Finite Element Analysis of Elastomers, Whitepaper Santa Ana, California.
  18. Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures from Theory to Practice, John Willey and Sons, Inc.
  19. Pan, P., Zamfirescu, D., Nakashima, M., Nakayasu, N. and Kashiwa, H. (2005), "Base-isolation design 499 practice in Japan: Introduction to the post Kobe approach", Journal of Earthquake Engineering, 9(1), 147-171.
  20. Toopchi-Nezhad, H., Tait, M.J. and Drysdale, R.G. (2008), "Testing and modeling of square carbon fiber-reinforced elastomeric seismic isolators", Structural Control and Health Monitoring, 15(6), 876-900. https://doi.org/10.1002/stc.225
  21. Toopchi-Nezhad, H., Tait, M.J. and Drysdale, R.G. (2011), "Bonded versus unbonded strip fiber reinforced elastomeric isolators: Finite element analysis", Composite Structures, 93(2), 850-859. https://doi.org/10.1016/j.compstruct.2010.07.009
  22. Tschoegl, N.W. (1971), "Constitutive equations for elastomers", Journal of Polymer Science Part-A: Polymer Chemistry, 9(7), 1959-1970. https://doi.org/10.1002/pol.1971.150090714
  23. Uniform Building Code (UBC) (1997), Volume 2, Structural Design Requirements, Earthquake Regulations for Seismic Isolated Structure, Whittier, CA.
  24. Wong, J.Y. (2001), Theory of Ground Vehicle, 3rd Edition, John Wiley and Sons, Inc.
  25. Zienkiewicz, O.C., Taylor, R.L. and Zhu, J.Z. (2005), The Finite Element Method: Its Basis and Fundamentals, 6th Edition, Butterworth-Heinemann, Oxford.

피인용 문헌

  1. Application of waste rubber to reduce the settlement of road embankment vol.9, pp.2, 2015, https://doi.org/10.12989/gae.2015.9.2.219
  2. Modelling, simulation and experiment of the spherical flexible joint stiffness vol.9, pp.1, 2018, https://doi.org/10.5194/ms-9-81-2018
  3. Finite element analysis and experimental verification of the scrap tire rubber pad isolator vol.11, pp.2, 2013, https://doi.org/10.1007/s10518-012-9393-4