• ETRI Journal
• /
• v.33 no.1
• /
• pp.140-143
• /
• 2011

Recent test data compression techniques raise concerns regarding power dissipation and compression efficiency. This letter proposes a new test data compression scheme, twin symbol encoding, that supports block division skills that can reduce hardware overhead. Our experimental results show that the proposed technique achieves both a high compression ratio and low-power dissipation. Therefore, the proposed scheme is an attractive solution for efficient test data compression.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.95-104
• /
• 2003

The material properties of rubber was determined by the experiments of uniaxial tension, uniaxial compression, planer tension, equi-biaxial tension and volumetric compression. In compression test, it is difficult to obtain the pure state of compression stress and strain due to friction force between the specimen and compression platen. In this study, the stress and strain data from the equi-biaxial tension test were converted to compression stress and strain and compared to a pure state of simple compression data when friction was zero. The compression test device with the tapered platen was proposed to overcome the effect of friction. It was fumed out that the relationship of the stress and strain using the tapered platen was in close agreement with the pure compressive state.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.43-47
• /
• 2011

Purpose: The aim of this preliminary study was to use hand function tests to Hand dexterity levels provided by the type of compression garment and compression bandages in asymptomatic subjects and to collect baseline data for the comparison of hand functions in the patients with chronic arm lymphedema. Methods: The subjects of this study were 32 healthy volunteer female with a mean age of 45.8 years. Grip strength and hand functions were tested in three conditions-no compression, compression garment, and compression bandages-using the nine-hole peg test (NHPT), the box and block test (B&BT), Minnesota Manual Dexterity test (MMDT), and the hand-held Jamar dynamometer. Results: The grip strength was significantly low in the bandage condition (p<0.05). The performance in both compression groups (i.e., bandage and compression garment) decreased as the thickness of the compression material increased (p<0.05). Conclusion: The findings of this study suggest that grip strength and hand function scores are influenced by the characteristics of the compression applied. Future study is needed to determine the level of hand function between patients with chronic arm lymphedema and healthy individuals.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.582-594
• /
• 2016

Various test data compression techniques have been developed to reduce the test costs of system-on-a-chips. In this paper, a scan chain reordering algorithm for code-based test data compression techniques is proposed. Scan cells within an acceptable relocation distance are ranked to reduce the number of conflicts in all test patterns and rearranged by a positioning algorithm to minimize the routing overhead. The proposed method is demonstrated on ISCAS '89 benchmark circuits with their physical layout by using a 180 nm CMOS process library. Significant improvements are observed in compression ratio and test power consumption with minor routing overhead.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.45-54
• /
• 2002

This paper proposes serial test data compression, a novel DFT scheme for embedded cores in SOC. To reduce test data amounts, share bit compression and fault undetectable fault pattern compression techniques was used. A Circuits using serial test data compression method are derived from a scan DFT method including a test-per-clock technique. For an experiment of the proposed compression method, full scan versions of ISCASS85 and ISCASS89 were used. ATALANTA has been used for ATPG and fault simulation. The amount of test data has been reduced by maximum 98% comparing with original data.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.5
• /
• pp.472-475
• /
• 2012

Objective : The aim of this study is to establish the value of hand elevation test as a reproducible provocative test for the diagnosis of carpal tunnel syndrome (CTS). Methods : We had a prospective study of 45 hands of 38 patients diagnosed with CTS between April 2005 and February 2009. The diagnosis of CTS was based on the American Academy of Neurology clinical diagnostic criteria. Experimental and control group patients underwent Tinel's test, Phalen's test, carpal compression test and hand elevation test as provocative tests for CTS. Results : We used chi-square analysis to compare Tinel's test and Phalen's test, carpal compression test with hand elevation test. The sensitivity and specificity of the hand elevation test is 86.7% and 88.9% each. Tinel's test had 82.2% sensitivity and 88.9% specificity. Phalen's test had 84.4% sensitivity and 86.7% specificity. Carpal compression test had 84.4% sensitivity 82.2% specificity. Comparisons of sensitivity and specificity between hand elevation test and Tinel's test, Phalen's test, and carpal compression test had no statistically significant differences. To compare the diagnostic accuracies of four tests, the area under the non-parametric receiver operating character curve was applied. Conclusion : The hand elevation test has higher sensitivity and specificity than Tinel's test, Phalen's test, and carpal compression test. Chi-square statistical analysis confirms the hand elevation test is not ineffective campared with Tinel's test, Phalen's test, and carpal compression test.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.13-15
• /
• 2001

Compression test has been used to measure material flow stress due to limited capability of tensile test at the fast strain rate. Since the frictional stress unavoidable during compression test should be properly eliminated from the measured stress, calibration of the measured stress by using friction factor has been made for the flow stress measurement. Also, calibrated stresses by interrupted and continuous compression tests have been compared with the true stress measured by tensile test at $0.2\%$ carbon steel.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.425-430
• /
• 2003

The material properties of rubber was determined by the experiments of uniaxial tension, uniaxial compression, planer tension, equi-biaxial tension and volumetric compression. In compression test, it is difficult to obtain the pure state of compression stress and strain due to friction force between the specimen and compression platen. In this study, the stress and strain data from the equi-biaxial tension test were converted to compression stress and strain and compared to a perfect state of simple compression data when friction was zero. The compression test device with the tapered platen was proposed to overcome the effect of friction. It was turned out that the relationship of the stress and strain using the tapered platen was in close agreement with the pure compressive state.

• Textile Coloration and Finishing
• /
• v.23 no.1
• /
• pp.60-68
• /
• 2011

The effect of compression wear for sport performance and muscle function was investigated based on the physiological test and electromyograph(EMG). The EMG test was used to study muscle activity after fitting the compression wear during exercise. It showed slight difference between men and women testee groups in the results of anaerobic, aerobic, fatigue, and EMG test due to muscle content in the body. In addition, the exercise performance was increased to some extent even the muscle activity was decreased. It is estimated that the compression effect to muscle by the compression wear decreased the muscle vibration and improved blood circulation which helped the entire sport performance. However, it is necessary to study the effect of compression wear in long-term wearing in the future study.

• Geomechanics and Engineering
• /
• v.19 no.4
• /
• pp.353-360
• /
• 2019

The elastic modulus is an important parameter to characterize the property of rock. It is common knowledge that the strengths of rocks are significantly different under tension and compression. However, little attention has been paid to the bi-modularity of rock. To validate whether the rock elastic moduli in tension and compression are the same, Brazilian disc, direct tension and compression tests were conducted. A horizontal laser displacement meter and a pair of vertical and transverse strain gauges were applied. Four types of materials were tested, including three types of rock materials and one type of steel material. A comprehensive comparison of the elastic moduli based on different experimental results was presented, and a tension-compression anisotropy model was proposed to explain the experimental results. The results from this study indicate that the rock elastic modulus is different under tension and compression. The ratio of the rock elastic moduli under compression and tension ranges from 2 to 4. The rock tensile moduli from the strain data and displacement data are approximate. The elastic moduli from the Brazilian disc test are consistent with those from the uniaxial tension and compression tests. The Brazilian disc test is a convenient method for estimating the tensile and compressive moduli of rock materials.