DOI QR코드

DOI QR Code

Study on critical buckling load calculation method of piles considering passive and active earth pressure

  • Chen, Yong-Hui (Research Institute of Geotechnical Engineering, Hohai University) ;
  • Chen, Long (Research Institute of Geotechnical Engineering, Hohai University) ;
  • Xu, Kai (Nanjing Hydraulic Research Institute) ;
  • Liu, Lin (Research Institute of Geotechnical Engineering, Hohai University) ;
  • Ng, Charles W.W. (The Hong Kong University of Science and Technology)
  • 투고 : 2013.05.08
  • 심사 : 2013.10.20
  • 발행 : 2013.11.10

초록

Different types of long slender pile shall buckle with weak soil and liquefied stratum surrounded. Different from considering single side earth pressure, it was suggested that the lateral earth pressure can be divided into two categories while buckling: the earth pressure that prevent and promotes the lateral movement. Active and passive earth pressure calculation model was proposed supposing earth pressure changed linearly with displacement considering overlying load, shaft resistance, earth pressure at both sides of the pile. Critical buckling load calculation method was proposed based on the principle of minimum potential energy quoting the earth pressure calculation model. The calculation result was contrasted with the field test result of small diameter TC pile (Plastic Tube Cast-in-place pile). The fix form could be fixed-hinged in the actual calculation assuring the accuracy and certain safety factor. The contributions of pile fix form depend on the pile length for the same geological conditions. There exists critical friction value in specific geological conditions that the side friction has larger impact on the critical buckling load while it is less than the value and has less impact with larger value. The buckling load was not simply changed linearly with friction. The buckling load decreases with increased limit active displacement and the load tend to be constant with larger active displacement value; the critical buckling load will be the same for different fix form for the small values.

키워드

참고문헌

  1. Chen, Y.H., Cao, D.H., Wang, X.Q., Du, H.W. and Zhang, T. (2008), "Field study of plastic tube cast-in-place concrete pile", Journal of Central South University of Technology, 15(S2), 195-202. https://doi.org/10.1007/s11771-008-0457-1
  2. Cortlever, N.G. and Gutter, H.H. (2002), "Design of double track railway Bidor-Rawang on AuGeo piling system according to BS8006 and PLAXIS numerical analysis", http://cofra.sk/files/documents/technicke_spravy/kl2002augeo.pdf.
  3. Golder, H.G. and Skipp, B.O. (1957), "The buckling of piles in soft clay", Proceedings of the 4th Int. Conf. on Soil Mech. and Found. Eng., London, England.
  4. Bergfelt, A. (1957), "The axial and lateral load bearing capacity, and failure by buckling of piles in soft clay", Proceedings of the 4th Int. Conf. on Soil Mech. and Found. Eng., London, England.
  5. Brandtzaeg, A. and Harboe, E. (1957), "Buckling tests of slender steel piles in soft, quick clay", Proceedings of the 4th. Int. Conf. Soil Mech. Found. Eng., 19-23.
  6. Dasha Suresh, R., Subhamoy, B. and Anthony. B. (2010), "Bending-buckling interaction as a failure mechanism of piles in liquefiable soils", Soil Dynamics and Earthquake Engineering, 30(1-2), 32-39. https://doi.org/10.1016/j.soildyn.2009.08.002
  7. Davisson, M.T. and Robinson, K.E. (1965), "Bending and buckling of partially embedded piles", Proceeding 6th International Conference on Soil Mechanics and Foundation Engineering, Toronto, University of Toronto Press.
  8. Gabr, M.A., Wang, J.J. and Zhao, M. (1997), "Buckling of piles with general power distribution of lateral subgrade reaction", Journal of Geotechnical and Geoenvironmental Engineering, 123(2), 123-130. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:2(123)
  9. Haldar, S. and Babu, G.L.S. (2010), "Failure mechanisms of pile foundations in liquefiable soil: parametric study", International Journal of Geomechanics, 10(2), 74-83. https://doi.org/10.1061/(ASCE)1532-3641(2010)10:2(74)
  10. Lambe, T.W. and Whitman, R. (1969), Soil mechanics, Massachusetts Institute of Technology, John Wiley & Sons, New York.
  11. Lin, S.S. and Chang, W.K. (2010), "Buckling of piles in a layered elastic medium", Journal of the Chinese Institute of Engineers, 25(2), 157-169.
  12. Lin, C., Bennett, C., Han, J. and Parsons, R.L. (2010), "p-y based approach for buckling analysis of axially loaded piles under scoured conditions", Structures Congress, 110-120.
  13. Mei, G.X. and Zai, J.M. (2001), "Rankine earth pressure model considering deformation", Chinese Journal of Rock Mechanics and Engineering, 20(6), 851-854.
  14. Ofner, R. and Wimmer, H. (2007), "Buckling resistance of micropiles in varying soil layers", Bautechnik, 84(12), 881-890. https://doi.org/10.1002/bate.200710075
  15. Poulos, H.G. and Davis, E.H. (1980), Pile Foundation Analysis and Design, The University of Sydney, Sydney.
  16. Poulos, H.G. and Mattes, N.S. (1969), "The behaviour of axially loaded end-bearing pile", Geotechnique, 19(2), 285-300. https://doi.org/10.1680/geot.1969.19.2.285
  17. Reddy, A.S. and Valsangkar, A.J. (1970), "Buckling of fully and partially embedded piles", Journal of Soil Mechanics and Foundation, 96(6), 1951-1965.
  18. Shields, D.R. (2007), "Buckling of micropiles", Journal of Geotechnical and Geoenvironmental Engineering, 133(3), 334-337. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:3(334)
  19. Tomas, A. and Pedro, T.J. (2012), "The influence of initial geometric imperfections on the buckling load of single and double curvature concrete shells", Computers and Structures, 96-97, 34-45. https://doi.org/10.1016/j.compstruc.2012.01.007
  20. Vogt, N., Vogt, S. and Kellner, C. (2009), "Buckling of slender piles in soft soils", Supplement: Geotechnical Engineering, 86(S1), 98-112.
  21. Wei, D.X. (2009), "Research on the calculation method for elastic long pile under horizontal load", Southwest Jiaotong University, Chengdu.
  22. Yang, W.H. and Song, L. (2000), "Axial buckling analysis for top-free and bottom-fixed pile", Engineering Mechanics, 5, 63-66.
  23. Yao, W.J., Qiu, Y.Z. and Cheng, Z.K. (2009), "Initial post-buckling analysis for super-long rock-socketed piles", Chinese Journal of Geotechnical Engineering, 31(5), 738-742.
  24. Zhu, D.T. (2004), "Stability of friction-bearing piles", Chinese Journal of Rock Mechanics and Engineering, 12, 2106-2109.
  25. Zhao, M.H. (1990), "Buckling analysis and tests of bridge piles", China Journal of Highway and Transport, 3(4), 47-56.

피인용 문헌

  1. Development of Linearized Buckling Analysis Computer Program Considering Subspace Iteration Method vol.30, pp.12, 2014, https://doi.org/10.5659/JAIK_SC.2014.30.12.37
  2. Small- and large-scale model tests on the buckling property of slender pile 2017, https://doi.org/10.1080/1064119X.2017.1285378
  3. Bearing capacity of micropiled-raft system vol.63, pp.3, 2017, https://doi.org/10.12989/sem.2017.63.3.417
  4. Study on large tonnage pile foundation load test system and field test of long rock-socketed pile vol.21, pp.6, 2020, https://doi.org/10.12989/gae.2020.21.6.565