참고문헌
- Rahou, M., Cheikh, A., Sebaa, F., 2009, Real Time Compensation of Machining Errors for Machine Tools NC based on Systematic Dispersion, World Academy of Science, Engineering and Technology. 32 10-16.
- Ye, P., Shi, C., Yang, K., Lv Q., 2008, Interpolation of continuous micro line segment trajectories based on look-ahead algorithm in high-speed machining, Int J Adv Manuf Technol. 37 881-897. https://doi.org/10.1007/s00170-007-1041-9
- Luo, F. Y., Zhou, Y. F., Yin, J., 2007, A universal velocity profile generation approach for high-speed machining of small line segments with look-ahead, Int J Adv Manuf Technol. 35 505-518. https://doi.org/10.1007/s00170-006-0735-8
- Hu, J., Xiao, L., Wang, Y., Wu, Z., 2006, An Optimal Feedrate Model and Solution Algorithm for a High-Speed Machine of Small Line Blocks with Look-Ahead, Int J Adv Manuf Technol. 28 930-935. https://doi.org/10.1007/s00170-004-1884-2
- Park, D. G., Lee, E. S., 2006, Volumetric Error Calibration of NC Machine Tools using a Hole-Plate Artifact, Transactions of the Korean Society of Machine Tool Engineers. 15:1 1-7.
- Qiu, H., Li, Y. B., Li, Y., 2001, A new method and device for motion accuracy measurement of NC machine tools Part : 2 device error identification and trajectory measurement of general planar motions, International Journal of Machine Tools & Manufacture. 41 535-554. https://doi.org/10.1016/S0890-6955(00)00093-6
- Tsai, M.C., Cheng, M.Y., Lin, K.F., Tsai, N.C., 2005, On Acceleration-Deceleration Before Interpolation for CNC Motion Control, International Conference on Mechatronics. 382-387.
- Lee, D.Y., Kim, H.C., Yang, M.Y., Choi, I.H., 2004, High speed machining using a NURBS interpolator, Proceeding of the Korean Society of Manufacturing Technology Engineers Spring Conference. 323-328.
- Lee, H.G., Yoo,S.M., Park,H.S., Roh, D. H., 2006, A study on the prediction of NC Machine Roundness using Neural Network, Proceeding of the Korean Society of Manufacturing Technology Engineers Spring Conference. 403-408.
- Jung, Y. H., So, B. S., Yeo, K. D., 2006 5-axis Machining Time Estimation based on Machine Characteristics Proceeding of the Korean Society of Manufacturing Technology Engineers Spring Conference. 208-214.
- Jeon, E.C., Lee, S.Y., Lee, W.H., Kim, D. H., Chun, J. D., 2011 A Study on the Improvement of Productivity and Surface Roughness in Mold Machining using the Optimization of Cutting Force Journal of the Korean Society of Manufacturing Technology Engineers. 20:6 824-829.
- Kim, Y.S., Kim, J.Y., Song, I.S., Kwac, L.K., Jung, J.P., Han, J.H., 2002 The Organization of Measuring Systems of Linear Cycle Plane Positioning Accuracy on NC Lathes Proceeding of the Korean Society of Manufacturing Technology Engineers Autumn Conference. 387-392
- Rew, K. H., 2005, Comparison Study on Various Motor Profiles, The Journal of Research Institute for Engineering & Technology. 24 101-111.
- FANUC n.d., PARAMETER MANUAL, FANUC Series 30i