Structural Engineering and Mechanics

  • 제47권1호
  • /
  • Pages.119-129
  • /
  • 2013
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimization of modal load pattern for pushover analysis of building structures

  • Shayanfar, Mohsen Ali (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology) ;
  • Ashoory, Mansoor (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology) ;
  • Bakhshpoori, Taha (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology) ;
  • Farhadi, Basir (Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology)
  • 투고 : 2012.02.17
  • 심사 : 2013.07.03
  • 발행 : 2013.07.10
⟨ 이전 논문 다음 논문 ⟩

초록

Nonlinear Static Procedures (NSPs) have been developed as a practical tool to estimate the seismic demand of structures. Several researches have accomplished to minimize errors of NSPs, namely pushover procedures, in the Nonlinear Time History Analysis (NTHA), as the most exact method. The most important issue in a typical pushover procedure is the pattern and technique of loading which are extracted based on structural dynamic fundamentals. In this paper, the coefficients of modal force combination is focused involving a meta-heuristic optimization algorithm to find the optimum load pattern which results in a response with minimum amount of errors in comparison to the NTHA counterpart. Other parameters of the problem are based on the FEMA recommendations for pushover analysis of building structures. The proposed approach is implemented on a high-rise 20 storey concrete moment resisting frame under three earthquake records. In order to demonstrate the effectiveness and robustness of the studied procedure the results are presented beside other well-known pushover methods such as MPA and the FEMA procedures, and the results show the efficiency of the proposed load patterns.

키워드

참고문헌

  1. ACI Committee 318 (2002), Building Code Requirements for Reinforced Concrete and Commentary (ACI318-02/ACI318R-02), American Concrete Institute, Detroit.
  2. American Concrete Institute (2005), Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), Farmington Hills, MI.
  3. American Society of Civil Engineers (ASCE) (2002), Minimum Design Loads for Buildings and Other Structures (ASCE 7-02), Reston, Virginia.
  4. Applied Technology Council (ATC-40) (1996), Seismic evaluation and retrofit of concrete buildings, Redwood city, CA.
  5. Building Seismic Safety Council (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, Washington, DC.
  6. Chopra, A.K (2001), Dynamics of Structure: Theory and Applications to Earthquake Engineering, Prentice-Hall, Englewood Cliffs, NJ.
  7. Chopra, A.K and Goel, R.K (2002), "A modal pushover analysis procedure for estimating seismic demands for buildings", Earthquake Eng. Struct. Dyn., 31(3), 561-82. https://doi.org/10.1002/eqe.144
  8. FEMA-356 (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Federal Emergency Management Agency, Washington DC.
  9. FEMA-P695 (2009), Quantification of Building Seismic Performance Factors (ATC-63 Project), Federal Emergency Management Agency, Washington D.C.
  10. Fajfar, P. and Gaspersic, P. (1996), "The N2 method for the seismic damage analysis of RC buildings", Earthquake Eng. Struct. Dyn., 25(1), 31-46. https://doi.org/10.1002/(SICI)1096-9845(199601)25:1<31::AID-EQE534>3.0.CO;2-V
  11. Gupta, A. and Krawinkler, H. (2000), "Estimation of seismic drift demands for frame structures", Earthquake Eng. Struct. Dyn., 29(9), 1287-1305. https://doi.org/10.1002/1096-9845(200009)29:9<1287::AID-EQE971>3.0.CO;2-B
  12. International Code Council (2003), International Building Code, Falls Church, VA.
  13. Jan, T.S., Liu, M.W. and Kao, Y.C. (2004), "An upper-bound pushover analysis procedure for estimating the seismic demands of high-rise buildings", Eng. Struct., 26(1), 117-128. https://doi.org/10.1016/j.engstruct.2003.09.003
  14. Kafrawy, O.E., Bagchi, A. and Humar, J. (2011), "Seismic performance of concrete moment resisting frame buildings in Canada", Struct. Eng. Mech., 37(2), 233-251. https://doi.org/10.12989/sem.2011.37.2.233
  15. Kalkan, E. and Kunnath, S.K. (2004), "Method of modal combinations for pushover analysis of buildings", Proc. of the 13th World Conference on Earthquake Engineering, Paper no. 2713.
  16. Kaveh, A. and Bakhshpoori, T. (2011), "Optimum design of steel frames using Cuckoo Search algorithm with Levy flights", Struct. Des. Tall Spec. Build., DOI: 10.1002/tal.513.
  17. Khoshnoud, H.R. and Marsono, K. (2012), "Assessment of FEMA356 nonlinear static procedure and modal pushover analysis for seismic evaluation of buildings", Struct. Eng. Mech., 41(2), 243-262. https://doi.org/10.12989/sem.2012.41.2.243
  18. Kim, S. and D'Amore, E. (1999), "Push-over analysis procedures in earthquake engineering", Earthquake Spectra, 15(3), 417-434. https://doi.org/10.1193/1.1586051
  19. Krawinkler, H. and Seneviratna, G.D.P.K. (1998), "Pros and cons of a pushover analysis of seismic performance evaluation", Eng. Struct., 20(4-6), 452-464. https://doi.org/10.1016/S0141-0296(97)00092-8
  20. Kunnath, K.S. (2004), "Identification of modal combination for nonlinear static analysis of building structure", Comput. Aided Civ. Infrastruct. Eng., 19(4), 246-259. https://doi.org/10.1111/j.1467-8667.2004.00352.x
  21. Liao, W.C. (2010), "Performance-based plastic design of earthquake resistant reinforced concrete moment frames", A Dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Civil Engineering) in The University of Michigan.
  22. Lopez-Menjivar, M.A. and Pinho, R. (2004), "A review of existing pushover methods for 2-D reinforced concrete buildings", Rose School, Pavia, Italy.
  23. Miranda, E. and Bertero, V.V. (2004), "Evaluation of strength reduction factors for earthquake-resistant design", Earthquake Spectra, 10(2), 357-379
  24. Mwafy, A.M. and Elnashai, A.S. (2001), "Static pushover versus dynamic collapse analysis of RC buildings", Eng. Struct., 23(5), 407-424. https://doi.org/10.1016/S0141-0296(00)00068-7
  25. OpenSEES Development Team (Open Source Project) (1998), OpenSEES: Open system for earthquake engineering simulation. Berkeley (CA): Pacific Earthquake Engineering Research Center, University of California, http://opensees.berkeley.edu/.
  26. Saiidi, M. and Sozen, M.A. (1981), "Simple non-linear seismic analysis of RC structures", J. Struct. Div., 107(ST5), 937-951.
  27. Somerville, P., Smith, N., Punyamurthula, S. and Sun, J. (1997), "Development of ground motiontime histories for phase 2 of the FEMA/SAC steel project", Report SAC/BD-97/04, Prepared for the SAC Joint Venture, Sacramento (CA), Structural Engineers Association of California.
  28. Yang, X.S. (2008), "Nature-inspired metaheuristic algorithms", Luniver Press, UK.
  29. Yang, X.S. and Deb, S. (2010), "Engineering optimisation by Cuckoo search", Int. J. Mathematical Modelling and Numerical Optimization, 1,330-343. https://doi.org/10.1504/IJMMNO.2010.035430

피인용 문헌

  1. Effectiveness of different standard and advanced pushover procedures for regular and irregular RC frames vol.51, pp.3, 2014, https://doi.org/10.12989/sem.2014.51.3.433
  2. Use of design optimization techniques in solving typical structural engineering related design optimization problems vol.55, pp.6, 2015, https://doi.org/10.12989/sem.2015.55.6.1121
  3. Error estimation of nonlinear equivalent static analysis for 3D-BRB frames 2017, https://doi.org/10.1007/s12205-017-0142-8
  4. An efficient multi-objective cuckoo search algorithm for design optimization vol.1, pp.1, 2016, https://doi.org/10.12989/acd.2016.1.1.087
  5. Subspace search mechanism and cuckoo search algorithm for size optimization of space trusses vol.18, pp.2, 2015, https://doi.org/10.12989/scs.2015.18.2.289
  6. A stochastic adaptive pushover procedure for seismic assessment of buildings vol.14, pp.5, 2013, https://doi.org/10.12989/eas.2018.14.5.477
  7. Influence of rooftop telecommunication tower on set back-step back building resting on different ground slopes vol.18, pp.2, 2013, https://doi.org/10.1007/s11803-019-0508-7
  8. Developing a method for multi-modal shear-based pushover analysis vol.22, pp.2, 2021, https://doi.org/10.1007/s42107-020-00308-1