Computers and Concrete

  • 제11권5호
  • /
  • Pages.441-462
  • /
  • 2013
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new method solving the temperature field of concrete around cooling pipes

  • Zhu, Zhenyang (Hydrochina Huadong Engineering Corporation) ;
  • Qiang, Sheng (College of Water conservancy & Hydropower Engineering, Hohai University) ;
  • Chen, Weimin (Hydrochina Huadong Engineering Corporation)
  • 투고 : 2011.02.14
  • 심사 : 2012.10.30
  • 발행 : 2013.05.01
⟨ 이전 논문 다음 논문 ⟩

초록

When using the conventional finite element method, a great number of grid nodes are necessary to describe the large and uneven temperature gradients in the concrete around cooling pipes when calculating the temperature field of mass concrete with cooling pipes. In this paper, the temperature gradient properties of the concrete around a pipe were studied. A new calculation method was developed based on these properties and an explicit iterative algorithm. With a small number of grid nodes, both the temperature distribution along the cooling pipe and the temperature field of the concrete around the water pipe can be correctly calculated with this new method. In conventional computing models, the cooling pipes are regarded as the third boundary condition when solving a model of concrete with plastic pipes, which is an approximate way. At the same time, the corresponding parameters have to be got by expensive experiments and inversion. But in the proposed method, the boundary condition is described strictly, and thus is more reliable and economical. And numerical examples were used to illustrate that this method is accurate, efficient and applicable to the actual engineering.

키워드

참고문헌

  1. Deng, J.Q. and Zhu, Y.M. (2008), "Method for grid division of finite elements based on coordinate transformation of super-element shape function and for grid subdivision of cooling water pipe", Nature Sci., 30(2), 8-12.
  2. Dundulis, G., Uspuras, E., Kulak, R.F. and Marchertas, A. (2007), "Evaluation of pipe whip impacts on neighboring piping and walls of the Ignalina Nuclear Power Plant", Nucl. Eng. Des., 237(8), 848-857. https://doi.org/10.1016/j.nucengdes.2005.12.013
  3. He, J. and Hoyano, A. (2010), "Experimental study of cooling effects of a passive evaporative cooling wall constructed of porous ceramics with high water soaking-up ability", Build. Environ., 45(2), 461-472. https://doi.org/10.1016/j.buildenv.2009.07.002
  4. Kawaraba, H., Kanokogi, T. and Tanabe, T. (1986), "Development of the FEM program for the analysis of pipe cooling effects on the thermal stress of massive concrete", Trans JCI., 8, 125-130.
  5. Kim, J.K., Kim, K.H. and Yang, J.H. (2001), "Thermal analysis of hydration heat in concrete structures with pipe-cooling system", Comput. Struct., 79(2), 163-171. https://doi.org/10.1016/S0045-7949(00)00128-0
  6. Koschenz, M. and Dorer, V. (1999), "Interaction of an air system with concrete core conditioning", Energy Build., 30(2), 139-145. https://doi.org/10.1016/S0378-7788(98)00081-4
  7. Machida, N. and Uehara, K. (1987), "Nonlinear thermal stress analysis of a massive concrete structure", Comput. Struct., 26(1-2), 287-296. https://doi.org/10.1016/0045-7949(87)90259-8
  8. De Schutter, G. (2002), "Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws", Comput. Struct., 80(27-30), 2035-2042. https://doi.org/10.1016/S0045-7949(02)00270-5
  9. Silin, N., Masson, V.P., Osorio, D. and Converti, J. (2010), "Hydrodynamic transition delay in rectangular channels under high heat flux", Ann. Nucl. Energy., 37(4), 615-620. https://doi.org/10.1016/j.anucene.2009.12.013
  10. Tan, B.K., Wong, T.N. and Ooi, K.T. (2010), "A study of liquid flow in a flat plate heat pipe under localized heating", Int. J. Therm. Sci., 49(1), 99-108. https://doi.org/10.1016/j.ijthermalsci.2009.06.013
  11. Wang, Z.H. and Zhu, Y.M. (2008), "Simulation and analysis of temperature field and stress field of sluice pier concrete during construction", J. Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban), 41(4), 476-481.
  12. Wang, Z.H., Zhu, Y.M. and Li, F. (2008), "Back analysis of concrete thermal parameters and study of feedback based on genetic algorithm", J. Wuhan Ligong Daxue Xuebao (Jiaotong Kexue Yu Gongcheng Ban), 32(4), 599-602.
  13. Xie, H.W. and Chen, Y.L. (2005), "Influence of the different pipe cooling scheme on temperature distribution in RCC arch dams", Commun. Numer. Meth. En., 21(12), 769-778. https://doi.org/10.1002/cnm.793
  14. Ni, Y.Q., Zhang, P., Ye, X.W., Lin, K.C. and Liao, W.Y. (2011), "Modeling of temperature distribution in a reinforced concrete supertall structure based on structural health monitoring data", Comput. Concrete, 8(3), 293-309. https://doi.org/10.12989/cac.2011.8.3.293
  15. Zhang, Z.M., Song, Z.T. and Huang, H.Y. (2002), "New theory on adiabatic temperature rise and heat conduction equation of concrete", J. Hohai Univ., 30(3), 1-6.
  16. Zhu, B.F. (2003), "A method for computing the adiabatic temperature rise of concrete considering the effect of the temperature of concrete", J. Hydrol. Eng., 81(2), 69-73.
  17. Zhu, B.F (2003), "The equivalent heat conduction equation of pipe cooling in mass concrete considering influence of external temperature", J. Hydraul. Eng., (3), 49-54.
  18. Zhu, B.F (2010), "On pipe cooling of concrete dams", J. Hydraul. Eng., 41(5), 505-513.
  19. Zhu, Y.M., Xu, Z.Q. and et al. (2003), "A calculation method for solving temperature field of mass concrete with cooling pipes", J. Yangtze River Sci. Res. Ins., 20(2), 19-22.

피인용 문헌

  1. A model for temperature influence on concrete hydration exothermic rate (part one: Theory and experiment) vol.29, pp.3, 2014, https://doi.org/10.1007/s11595-014-0954-z
  2. An extended finite element method for pipe-embedded plane thermal analysis vol.102-103, 2015, https://doi.org/10.1016/j.finel.2015.05.002
  3. An improved composite element method for the simulation of temperature field in massive concrete with embedded cooling pipe vol.124, 2017, https://doi.org/10.1016/j.applthermaleng.2017.06.124
  4. Cracking propagation of hardening concrete based on the extended finite element method vol.32, pp.5, 2017, https://doi.org/10.1007/s11595-017-1722-7
  5. A p-version embedded model for simulation of concrete temperature fields with cooling pipes vol.8, pp.3, 2015, https://doi.org/10.1016/j.wse.2015.08.001
  6. A Study on Relationship Between the Heat Release of Later-age Concrete and the Concrete Strength Development vol.10, pp.None, 2013, https://doi.org/10.2174/1874836801610010363
  7. A Method to Estimate the Error of Adiabatic Temperature Rise Testing Device vol.10, pp.None, 2016, https://doi.org/10.2174/1874836801610010538
  8. Mathematical modeling of concrete pipes reinforced with CNTs conveying fluid for vibration and stability analyses vol.19, pp.3, 2017, https://doi.org/10.12989/cac.2017.19.3.325
  9. An improvement on the concrete exothermic models considering self-temperature duration vol.19, pp.6, 2013, https://doi.org/10.12989/cac.2017.19.6.659
  10. Seismic response of SiO2 nanoparticles-reinforced concrete pipes based on DQ and newmark methods vol.19, pp.6, 2013, https://doi.org/10.12989/cac.2017.19.6.745
  11. An automated control system for concrete temperature development in construction vol.24, pp.5, 2019, https://doi.org/10.12989/cac.2019.24.5.437
  12. Prevention of crack formation in massive concrete at an early age by cooling pipe system vol.20, pp.8, 2013, https://doi.org/10.1007/s42107-019-00175-5
  13. Micro-scale FEM Calculation of Concrete Temperature during Production and Casting vol.35, pp.1, 2013, https://doi.org/10.1007/s11595-020-2234-4
  14. Simulation of Temperature Field of High Arch Dams Considering Solar Radiation vol.455, pp.None, 2013, https://doi.org/10.1088/1755-1315/455/1/012003
  15. Influence of the Elastic Modulus of the Bed on the Thermal Stress State of a Concrete Block vol.54, pp.1, 2013, https://doi.org/10.1007/s10749-020-01156-4
  16. Effect of pipe-cooling system on thermal-mechanical behaviour of PC box bridge girders at hydration age vol.1, pp.1, 2020, https://doi.org/10.1186/s43251-020-00009-4
  17. Thermal effect and optimal design of cooling pipes on mass concrete with constant quantity of water flow vol.78, pp.11, 2013, https://doi.org/10.1080/10407782.2020.1805222