DOI QR코드

DOI QR Code

Shear strength of full-scale steel fibre-reinforced concrete beams without stirrups

  • Spinella, Nino (Department of Civil Engineering, Universita di Messina)
  • Received : 2012.06.04
  • Accepted : 2012.10.26
  • Published : 2013.05.01

Abstract

Although shear reinforcement in beams typically consists of steel bars bent in the form of stirrups or hoops, the addition of deformed steel fibres to the concrete has been shown to enhance shear resistance and ductility in reinforced concrete beams. This paper presents a model that can be used to predict the shear strength of fibrous concrete rectangular members without stirrups. The model is an extension of the plasticity-based crack sliding model originally developed for plain concrete beams. The crack sliding model has been improved in order to take into account several aspects: the arch effect for deep beams, the post-cracking tensile strength of steel fibre reinforced concrete and its ability to control sliding along shear cracks, and the mitigation of the shear size effect due to presence of fibres. The results obtained by the model have been validated by a large set of experimental tests taken from literature, compared with several models proposed in literature, and numerical analyses are carried out showing the influence of fibres on the beam failure mode.

Keywords

References

  1. Adebar, P., Mindess, S., St-Pierre, D. and Olund, B. (1997), "Shear test of fiber concrete beams without stirrups", ACI J., 94(1), 68-76.
  2. Ashour, S.A., Hasanain, G.S. and Wafa, F.F. (1992), "Shear behaviour of high strength fiber reinforced concrete", ACI Struct. J., 89(2), 176-184.
  3. Barragan, a.E. (2002), Failure and toughness of steel fiber reinforced concrete under tension and shear, Ph. D. Thesis, Universitat Politecniea de Catalunya - Barcelona - Spain.
  4. Bentz, E.C. (2000), Sectional analysis of reinforced concrete membrane, Ph. D. Thesis, University of Toronto - Canada.
  5. Campione, G., La Mendola, L. and Papia, M. (2006), "Shear strength of fiber reinforced beams with stirrups", Struct. Eng. Mech., 24(1), 107-136. https://doi.org/10.12989/sem.2006.24.1.107
  6. Colajanni, P., Recupero, A. and Spinella, N. (2012), "Generalization of shear truss model to the case of SFRC beams with stirrups", Comput. Concrete, 9(3), 227-244. https://doi.org/10.12989/cac.2012.9.3.227
  7. Cucchiara, C., La Mendola, L. and Papia, M. (2004), "Effectiveness of stirrups and steel fibers as shear reinforcement", Cement Concrete Comp., 26(7), 777-786. https://doi.org/10.1016/j.cemconcomp.2003.07.001
  8. Dinh, H.H., Parra-Montesinos, G.J. and Wight, J.K. (2010), "Shear behavior of steel fiber-reinforced concrete beams without stirrup reinforcement", ACI Struct. J., 107(5), 597-606.
  9. Eurocode 2 (1993), Design of concrete structures, UNI-ENV 1992-1-2.
  10. Foster, S.J., Voo, Y.L. and Chong, K.T. (2006), FE analysis of steel fiber reinforced concrete beams failing in shear: Variable Engagement Model, ACI SP-237, 55-70.
  11. Foster, S.J. (2010), Design of FRC beams for shear using the VEM and the draft Model Code approach, Bulettin 57 FIB, 195-210.
  12. Imam, M., Vandewalle, L. and Mortelmans, F. (1998), "Shear-moment analysis of reinforced high strength concrete beams containing steel fibers", Can. J. Civil Eng., 22(3), 462-470.
  13. Kani, G.N.J. (1987), "How safe are our large reinforced concrete beams?", ACI J. Proc., 64(3), 128-141.
  14. Khuntia, M., Stojadinovic, B. and Subhash, C.G. (1999), "Shear strength of normal and high-strength fiber reinforced concrete beams without stirrups", ACI Struct. J., 96(2), 282-289.
  15. Kwak, Y.K., Eberhard, M.O., Kim, W.S. and KIM, J. (2002), "Shear strength of steel fiber-reinforced concrete beams without stirrups", ACI Struct. J., 99(4), 530-538.
  16. Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2011), "Diverse embedment model for fiber reinforced concrete in tension: model development", ACI Mater. J., 108(5), 516-525.
  17. Lee, S.C., Cho, J.Y. and Vecchio, F.J. (2011), "Diverse embedment model for fiber reinforced concrete in tension: model verification", ACI Mater. J., 108(5), 526-535.
  18. Li, V.C., Ward, R. and Hamza, A.M. (1992), "Steel and synthetic fibers as shear reinforcement", ACI Mater. J., 89(5), 499-508.
  19. Lim, T.Y., Paravasivam, P. and Lee, S.L. (1987), "Analytical model for tensile behaviour of steel-fiberconcrete", ACI Mater. J., 84(4), 286-298.
  20. Mansur, M.A., Ong, K.C. and Paravasivam, P. (1986), "Shear strength of fibrous concrete beams without stirrups", ASCE J. Struct. Eng., 112(9), 2066-2079. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:9(2066)
  21. Minelli, F. (2005), Plain and fiber reinforced concrete beams under shear loading: Structural behavior and design aspects, PhD Thesis, University of Brescia - Italy.
  22. Minelli, F. and Plizzari, G. (2010), Shear strength of FRC members with little or no shear reinforcement: A new analytical model, Bulettin 57 FIB, 211-225.
  23. Minelli, F. and Vecchio, F.J. (2006), "Compression field modeling of fiber-reinforced concrete members under shear loading", ACI Struct. J., 103(2), 244-252.
  24. Model Code 2010 (2010), Fib Bulletin 66, Final draft, 2.
  25. Narayanan, R. and Darwish, I.Y.S. (1987), "Use of steel fibers as shear reinforcement", ACI Struct. J., 84(3), 2066-2079.
  26. Nielsen, M.P. (1999), Limit analysis and concrete plasticity, 2nd ed., Boca Raton - Florida: CRC.
  27. Noghabai, K. (2000), "Beams of fibrous concrete in shear and bending: Experiment and model", ASCE J. Struct. Eng., 126(2), 243-251. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:2(243)
  28. Parra-Montesinos, G.J. (2006), "Shear strength of beams with deformed steel fibers", Concrete Int., 28(11), 57-66.
  29. Rosenbusch, J. and Teutsch, M. (2003), "Shear design with ($\sigma$-$\varepsilon$) method", International RILEM Workshop on Test and Design Methods for Steel fiber Reinforced Concrete, 105-117.
  30. Russo, G., Zingone, G. and Puleri, G. (1991), "Flexure-shear interaction model for longitudinally reinforced beams", ACI Struct. J., 88(1), 66-68.
  31. Sharma, A.K. (1986), "Shear strength of steel fiber reinforced concrete beams", ACI J., 83(4), 624-628.
  32. Spinella, N., Colajanni, P. and Recupero, A. (2010), "A simple plastic model for shear critical SFRC beams", ASCE J. Struct. Eng., 136(4), 390-400. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000127
  33. Spinella, N., Colajanni, P. and La Mendola, L. (2012), "Nonlinear analysis of beams reinforced in shear with stirrups and steel fibers", ACI Struct. J., 109(1), 53-64.
  34. Vandewalle, L. (2002), "Test and design methods of steel fibre reinforced concrete ? Results of the Rilem Committee", Proceedings of the 2nd Leipziger Fachtagung "Innovationen im Bauwesen", Faserbeton.
  35. Vecchio, F.J. and Collins, M.P. (1986), "The modified compression field theory for reinforced concrete elements subjected to shear", ACI Struct. J., 83(2), 219-231.
  36. Vecchio, F.J. (2000), "Disturbed stress field model for reinforced concrete: Formulation", ASCE J. Struct. Eng., 126(9), 1070-1077. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:9(1070)
  37. Vecchio, F.J. (2009), "Analysis of shear critical reinforced concrete beams", ACI Struct. J., 97(1), 102-110.
  38. Voo, Y.L. and Foster, S.J. (2003), Variable engagement model for fibre reinforced concrete in tension, Uniciv Report No R-420, School of Civil and Environmental Engineering - The University of New South Wales, Australia, 86.
  39. Voo, Y.L., Foster, S.J. and Gilbert, R.I. (2006), "Shear strength of fiber reinforced reactive powder concrete prestressed girders without stirrups", J. Adv. Concrete. Tech., 4(1), 123-132. https://doi.org/10.3151/jact.4.123
  40. Zhang, J.P. (1997), "Diagonal cracking and shear strength of reinforced concrete beams", Mag. Concrete Res., 49(178), 55-65. https://doi.org/10.1680/macr.1997.49.178.55

Cited by

  1. Failure mode transitions of corroded deep beams exposed to marine environment for long period vol.96, 2015, https://doi.org/10.1016/j.engstruct.2015.04.004
  2. Assessment of shear capacity methods of steel fiber reinforced concrete beams using full scale prestressed bridge beams vol.48, pp.11, 2015, https://doi.org/10.1617/s11527-014-0415-3
  3. Shear capacity in concrete beams reinforced by stirrups with two different inclinations vol.81, 2014, https://doi.org/10.1016/j.engstruct.2014.10.011
  4. Design procedure for prestressed concrete beams vol.13, pp.2, 2014, https://doi.org/10.12989/cac.2014.13.2.235
  5. Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study vol.2014, 2014, https://doi.org/10.1155/2014/840902
  6. Mechanical performance of deep beams damaged by corrosion in a chloride environment 2016, https://doi.org/10.1080/19648189.2016.1210033
  7. Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons vol.18, pp.3, 2017, https://doi.org/10.1002/suco.201600089
  8. Comparison of the mechanical characteristics of engineered and waste steel fiber used as reinforcement for concrete vol.158, 2017, https://doi.org/10.1016/j.jclepro.2017.04.165
  9. Steel Fibres: Effective Way to Prevent Failure of the Concrete Bonded with FRP Sheets vol.2016, 2016, https://doi.org/10.1155/2016/4913536
  10. Experimental Investigation of the Capacity of Steel Fibers to Ensure the Structural Integrity of Reinforced Concrete Specimens Coated with CFRP Sheets vol.52, pp.3, 2016, https://doi.org/10.1007/s11029-016-9592-1
  11. Shear strength degradation due to flexural ductility demand in circular RC columns vol.13, pp.6, 2015, https://doi.org/10.1007/s10518-014-9691-0
  12. Failure by corrosion in PC bridges: a case history of a viaduct in Italy vol.7, pp.2, 2016, https://doi.org/10.1108/IJSI-09-2014-0046
  13. Hybrid Fibres as Shear Reinforcement in High-Performance Concrete Beams with and without Openings vol.8, pp.11, 2018, https://doi.org/10.3390/app8112070
  14. Experimental Study on Shear Behavior of Steel Fiber Reinforced Concrete Beams with High-Strength Reinforcement vol.11, pp.9, 2018, https://doi.org/10.3390/ma11091682
  15. Fast classification of fibres for concrete based on multivariate statistics vol.20, pp.1, 2013, https://doi.org/10.12989/cac.2017.20.1.023
  16. The Effect of Specimen Shape on the Mechanical Properties of Sisal Fiber-Reinforced Concrete vol.12, pp.None, 2013, https://doi.org/10.2174/1874149501812010368
  17. Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers vol.166, pp.None, 2013, https://doi.org/10.1016/j.conbuildmat.2018.01.147
  18. An investigation into the shear strength of SFRC beams with opening in web using NFEM vol.21, pp.5, 2013, https://doi.org/10.12989/cac.2018.21.5.539
  19. Flexural analysis of steel fibre-reinforced concrete members vol.22, pp.1, 2013, https://doi.org/10.12989/cac.2018.22.1.011
  20. Database of Shear Experiments on Steel Fiber Reinforced Concrete Beams without Stirrups vol.12, pp.6, 2013, https://doi.org/10.3390/ma12060917
  21. ANN-Based Shear Capacity of Steel Fiber-Reinforced Concrete Beams without Stirrups vol.7, pp.10, 2013, https://doi.org/10.3390/fib7100088
  22. Influence of Fiber Content on Shear Capacity of Steel Fiber-Reinforced Concrete Beams vol.7, pp.12, 2013, https://doi.org/10.3390/fib7120102
  23. Mechanical model for the shear strength of steel fiber reinforced concrete (SFRC) beams without stirrups vol.53, pp.2, 2013, https://doi.org/10.1617/s11527-020-01461-4
  24. Computational Hybrid Machine Learning Based Prediction of Shear Capacity for Steel Fiber Reinforced Concrete Beams vol.12, pp.7, 2020, https://doi.org/10.3390/su12072709
  25. Effect of Steel Fibers on the Hysteretic Performance of Concrete Beams with Steel Reinforcement—Tests and Analysis vol.13, pp.13, 2020, https://doi.org/10.3390/ma13132923
  26. Computer modeling and analytical prediction of shear transfer in reinforced concrete structures vol.26, pp.2, 2020, https://doi.org/10.12989/cac.2020.26.2.151
  27. Steel fibers for replacing minimum reinforcement in beams under torsion vol.54, pp.1, 2013, https://doi.org/10.1617/s11527-021-01615-y
  28. Data-driven shear strength prediction of steel fiber reinforced concrete beams using machine learning approach vol.233, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2020.111743
  29. A Comprehensive Review on the Utilization of Recycled Waste Fibers in Cement-Based Composites vol.14, pp.13, 2013, https://doi.org/10.3390/ma14133643
  30. Shear tests of engineered cementitious composites: Mechanical behavior and toughness evaluation vol.22, pp.4, 2013, https://doi.org/10.1002/suco.202100077
  31. Shear behaviors of hollow slab beam bridges strengthened with high-performance self-consolidating cementitious composites vol.242, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2021.112613
  32. The Statistical Approach to Study the Effects of the Size of Coarse Aggregates and Percentage of Steel Fiber on Mechanical Properties and Ductility of Concrete vol.1166, pp.None, 2013, https://doi.org/10.4028/www.scientific.net/amr.1166.95
  33. Effect of steel fibres on concrete at different temperatures in terms of shear failure vol.73, pp.21, 2013, https://doi.org/10.1680/jmacr.19.00479
  34. Experimental and finite element studies on the behavior of hybrid reinforced concrete beams vol.15, pp.None, 2013, https://doi.org/10.1016/j.cscm.2021.e00607